Workbenches/ro: Difference between revisions
(Created page with "Rețineți că uneori un Workbench este denumit "Modul". Cu toate acestea, atelierele de lucru și modulele sunt entități diferite. Un modul este orice extensie a FreeCAD,...") |
(Created page with "== Ateliere încorporate ==") |
||
Line 8: | Line 8: | ||
Rețineți că uneori un Workbench este denumit "Modul". Cu toate acestea, atelierele de lucru și modulele sunt entități diferite. Un modul este orice extensie a FreeCAD, în timp ce un Workbench este o configurație GUI specială care grupează câteva bare de instrumente și meniuri. De obicei, fiecare modul conține propriul său Workbench, de unde și utilizarea încrucișată a numelui. |
Rețineți că uneori un Workbench este denumit "Modul". Cu toate acestea, atelierele de lucru și modulele sunt entități diferite. Un modul este orice extensie a FreeCAD, în timp ce un Workbench este o configurație GUI specială care grupează câteva bare de instrumente și meniuri. De obicei, fiecare modul conține propriul său Workbench, de unde și utilizarea încrucișată a numelui. |
||
== |
== Ateliere încorporate == |
||
The following workbenches are available on every FreeCAD installation: |
The following workbenches are available on every FreeCAD installation: |
Revision as of 12:11, 2 August 2018
FreeCAD, la fel ca multe aplicații de design moderne, precum Revit sau CATIA, se bazează pe conceptul de Workbench. Un aatelier poate fi considerat un set de instrumente special grupate pentru o anumită sarcină. Într-un atelier de mobilier tradițional, veți avea o masă de lucru pentru persoana care lucrează cu lemn, un altul pentru cel care lucrează cu piese de metal și poate un al treilea pentru tipul care montează toate piesele împreună.
În FreeCAD, se aplică același concept. Instrumentele sunt grupate în ateliere în funcție de sarcinile cu care sunt legate.
Când treceți de la un atelier la altul, se schimbă instrumentele disponibile pe interfață. Barele de instrumente, barele de comandă și, eventual, alte părți ale interfeței comută la noul tabel de lucru, dar conținutul scenei dvs. nu se schimbă. Ați putea, de exemplu, să începeți desenarea unor forme 2D cu Workbench Draft, apoi să lucrați mai departe pe ele cu Workbench Part.
Rețineți că uneori un Workbench este denumit "Modul". Cu toate acestea, atelierele de lucru și modulele sunt entități diferite. Un modul este orice extensie a FreeCAD, în timp ce un Workbench este o configurație GUI specială care grupează câteva bare de instrumente și meniuri. De obicei, fiecare modul conține propriul său Workbench, de unde și utilizarea încrucișată a numelui.
Ateliere încorporate
The following workbenches are available on every FreeCAD installation:
Workbenches
These are the base workbenches bundled with every installation of FreeCAD:
- The Arch Workbench for working with architectural elements.
- The Complete Workbench hold all commands and features from all the modules and workbenches which met certain quality criteria.
- The Draft Workbench contains 2D tools and basic 2D and 3D CAD operations.
- The Drawing Workbench for displaying your 3D work on a 2D sheet.
- The FEM Workbench provides Finite Element Analysis (FEA) workflow.
- The Image Workbench for working with bitmap images.
- The Inspection Workbench is made to give you specific tools for examination of shapes. It is still in development.
- The Mesh Workbench for working with triangulated meshes.
- The OpenSCAD Workbench for interoperability with OpenSCAD and repairing Constructive Solid Geometry (CSG) model history.
- The Part Workbench for working with CAD parts.
- The Part Design Workbench for building Part shapes from sketches.
- The Path Workbench is used to produce G-Code instructions. It is still in a stage of development. Only basic functions in 0.16
- The Plot Workbench is used to edit and save output plots created from other modules and tools.
- The Points Workbench for working with point clouds.
- The Raytracing Workbench for working with ray-tracing (rendering)
- The Reverse Engineering Workbench is intended to give you specific tools to convert shapes/solids/meshes into parametric FreeCAD-compatible features. It is still in development.
- The Robot Workbench for studying robot movements.
- The Ship Workbench FreeCAD-Ship works over Ship entities, that must be created on top of provided geometry.
- The Sketcher Workbench for working with geometry-constrained sketches.
- The Spreadsheet Workbench for creating and manipulating spreadsheet data.
- The Start Center Workbench allows you to quickly jump to one of the most common workbenches.
- The TechDraw Workbench is the more advanced and feature-rich successor of Drawing
- The Test Framework Workbench is for debugging FreeCAD.
- The Web Workbench provides you with a browser window instead of the 3D-View within FreeCAD.
External workbenches
FreeCAD workbenches are easy to program in Python, there are therefore many people developing additional workbenches outside of the FreeCAD codebase.
The External workbenches page has some information and tutorials about some of them, and the FreeCAD Addons project aims at gathering them and making them easily installable from within FreeCAD.
New workbenches are in development, stay tuned!