Środowiska pracy
FreeCAD, jak wiele nowoczesnych programów projektowych jak Revit, bazuje na koncepcji [1]. A workbench can be considered as a set of tools specially grouped for a certain task. In a traditional furniture workshop, you would have a work table for the person who works with wood, another one for the one who works with metal pieces, and maybe a third one for the guy who mounts all the pieces together.
In FreeCAD, the same concept applies. Tools are grouped into workbenches according to the tasks they are related to.
Currently we have the following workbenches available:
Built-in workbenches
- The Mesh Workbench for working with triangulated meshes.
- The Part Workbench for working with CAD parts.
- The Image Workbench for working with bitmap images.
- The Raytracing Workbench for working with ray-tracing (rendering).
- The Draft Workbench for doing basic 2D CAD drafting.
- The Drawing workbench for displaying your 3D work on a 2D sheet.
- Several testing workbenches. You'll find in the workbenches list several workbenches for testing different areas and functionalities since FreeCAD is still in an early phase of development.
New workbenches are in development, stay tuned!
When you switch from one workbench to another, the tools available on the interface change. Toolbars, command bars and eventually other parts of the interface switch to the new workbench, but the contents of your scene doesn't change. You could, for example, start drawing 2D shapes with the Draft Workbench, then work further on them with the Part Workbench.
