Workbenches

From FreeCAD Documentation
Revision as of 22:32, 29 November 2013 by Mario52 (talk | contribs) (Marked this version for translation)

FreeCAD, like many modern design applications such as Revit or CATIA, is based on the concept of Workbench. A workbench can be considered as a set of tools specially grouped for a certain task. In a traditional furniture workshop, you would have a work table for the person who works with wood, another one for the one who works with metal pieces, and maybe a third one for the guy who mounts all the pieces together.

In FreeCAD, the same concept applies. Tools are grouped into workbenches according to the tasks they are related to.

The following workbenches are available:

Template:Workbenches

New workbenches are in development, stay tuned!

When you switch from one workbench to another, the tools available on the interface change. Toolbars, command bars and eventually other parts of the interface switch to the new workbench, but the contents of your scene doesn't change. You could, for example, start drawing 2D shapes with the Draft Workbench, then work further on them with the Part Workbench.

Note that sometimes a Workbench is referred to as a Module. However, Workbenches and Modules are different entities. A Module is any extension of FreeCAD, while a Workbench is a special GUI configuration that groups some toolbars and menus. Usually every Module contains its own Workbench, hence the cross-use of the name.

Property editor
PartDesign Workbench