教學

From FreeCAD Documentation
Revision as of 08:16, 6 April 2020 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

This page presents a selection of high quality written tutorials. A complete, unsorted list of tutorials can be found in Category:Tutorials, a complete and sortable one can be found in the table below.

Visit offsite tutorials and video tutorials for lists of tutorials hosted on external sites. A useful source of video tutorials is YouTube.

If you'd like to contribute with writing wiki documentation and tutorials, see the general wiki guidelines in WikiPages, and read the tutorial guidelines.

Please notice the version of FreeCAD used in the tutorial as some tutorials may use an old version of the program. Although the general modelling process may still work, some tools may have changed.

Architecture and BIM

Modeling parts

FreeCAD provides two main workflows to modeling parts:

Please note that the PartDesign Workbench workflow was considerably changed from FreeCAD 0.17 onward; some of the tutorials haven't been updated and may refer to the 0.16 version.

The Raspberry Pi project has made simple tutorials that are easy to follow, particularly for those new to CAD systems:

Drafting and Sketching

Technical Drawings

FEM

CNC & 3D Printing

Import and Export

Rendering

Robot workbench

Plotting

Drawings

Development of the Drawing Workbench stopped in FreeCAD 0.16. Consider using the TechDraw Workbench instead.

Tutorials - Comprehensive list

Here are listed all the tutorials that are not in the manual regardless of their quality. If a tutorial is listed in the Category:Tutorials and not in this table please insert it.

Tutorial Topic Level Time to complete hh:mm Authors FreeCAD version Example files UnfinishedDocu


Add FEM Constraint Tutorial M42kus No
Add FEM Equation Tutorial M42kus No
Aeroplane Part Workbench Beginner 0:10 Hughthecat No
Analysis of reinforced concrete with FEM Reinforced concrete with FEM Intermediate 1:00 HarryvL 0.19 or above No
Arch panel tutorial Modeling an architectural panel Beginner 1:00 Yorik No
Arch tutorial Modeling Intermediate Yorik 0.14 No
Basic modeling tutorial Introduction to modelling Beginner 0:15 NormandC Any None No
Basic Part Design Tutorial (0.16 and below) Modeling Beginner Mark Stephen (Quick61) 0.14.3700 to 0.16 None No
Basic Part Design Tutorial (0.17 and above) Modeling Beginner HarryGeier 0.17 or above Basic Part Design for v0.17 No
Basic Sketcher Tutorial Sketcher Beginner 1:00 Drei and Vocx 0.19 Basic Sketcher tutorial No
Basic TechDraw Tutorial Modeling Beginner WandererFan 0.17 and above Basic Part Design for v0.17 Sample Basic TechDraw Tutorial Sample No
Code snippets Python Beginner No
Creating a simple part with PartDesign Modeling Beginner 1:00 GlouGlou 0.17 or above Creating a simple PartDesign Body.FCStd No
Customize Toolbars Beginner 0:05 Mario52 Any None No
Draft ShapeString tutorial Product Design Beginner 0:30 r-frank and vocx 0.17 and above Draft_Shapestring_Text No
Draft tutorial Drafting Beginner 0:30 Drei and vocx 0.19 Draft tutorial updated No
Draft tutorial Outdated Drafting Beginner
Drawing Template HowTo 2D Drafting Intermediate 1:00 Mark Stephen (Quick61) 0.14.3700 or greater or above None No
Drawing tutorial (obsolete) Blueprints / Drawings Beginner 0:15 Drei 0.16 or above No
Dxf Importer Install Topic Intermediate 0:05 Mario52 Any None No
Engine Block Tutorial Part Workbench Beginner 1:00 Andrewbuck40 0.14.3700 Yes
Export to STL or OBJ Export to STL or OBJ Beginner 0:20 r-frank 0.16.6703 No
Extend FEM Module M42kus No
FEM Beginner tutorial FEM Beginner tutorial Beginner thschrader 0.17.11622+ Whiffle Ball Yes
FEM CalculiX Cantilever 3D Finite Element Analysis Beginner 0:10 Bernd 0.16.6377 or above No
FEM Shear of a Composite Block Finite Element Analysis Beginner/Intermediate 0:300 HarryvL 0.17.12960 or above No
FEM tutorial Finite Element Analysis Beginner 0:10 Drei 0.16.6700 or above No
FEM Tutorial Python Finite Element Analysis Intermediate 0:30 Bernd 0.18.15985 or above No
FreeCAD-Ship s60 tutorial Ship Workbench Beginner No
FreeCAD-Ship s60 tutorial (II) Ship Workbench Beginner No
How to install additional workbenches Programming Medium programmer 0:15 r-frank Any None No
How to install macros Programming Medium programmer 0:15 Mario52 Any None No
Import from STL or OBJ Import from STL or OBJ Beginner 0:30 r-frank 1.0 0.16.6703 No
Import OpenSCAD code Import OpenSCAD code Beginner 0:30 r-frank 0.16.6704 None No
Import text and geometry from Inkscape Import text and geometry from Inkscape Beginner 0:30 r-frank 0.16.6704 No
Import/Export IFC - compiling IfcOpenShell Arch Workbench Advanced 2:00 Pablo Gil No
PartDesign tutorial Sketcher Beginner 0:15 Drei 0.16 or above No
Path Core Concepts Path Workbench Yes
Path Customization Path Workbench Yes
Path Postprocessor Customization Path Workbench chrisb No
Path scripting Path Workbench Intermediate No
Path Walkthrough for the Impatient Path Workbench Chrisb Yes
Plot Basic tutorial Plot Workbench Basic Tutorial Beginner No
Plot MultiAxes tutorial Plot workbench Intermediate No
Post-Processing of FEM Results with Paraview Post-Processing of FEM Results with ParaView Intermediate 2:00 HarryvL 0.19 [https://forum.freecadweb.org/download/file.php?id=103557 Beam] and wall No
Python scripting tutorial Programming Intermediate No
Raytracing tutorial Raytracing Beginner 0:010 Drei 0.16 or above No
Robot 6-Axis Robot Workbench Intermediate No
Robot tutorial Robot Workbench Beginner r-frank No
Scripted Parts: Ball Bearing - Part 1 Part Scripting - Ball Bearing #1 Beginner 0:30 r-frank 0.16.6706 No
Scripted Parts: Ball Bearing - Part 2 Part Scripting - Ball Bearing #2 Beginner 0:30 r-frank 0.16.6706 No
Scripts Scripting Beginner onekk Carlo 0.19 No
Simple Box Cover Modeling Beginner 0:20 Normand C 0.14.3700 Yes
Sketcher Micro Tutorial - Constraint Practices Sketcher Beginner 0:30 Mark Stephen (Quick61) and vocx 0.19 Sketcher Constraints practices No
Sketcher reference No
Sketcher requirement for a sketch Sketch Beginner Maker None No
Sketcher Tutorial Sketcher Beginner Ulrich No
TechDraw TemplateHowTo Drafting Intermediate 1:00 wandererfan 0.17 None No
Thread for Screw Tutorial Product design Advanced 1:00 DeepSOIC, Murdic, vocx 0.19 Updated: Thread for screw tutorial No
Toothbrush Head Stand Modeling Beginner 1:00 EmmanuelG 0.16 or greater Thingiverse 2403310 No
Topological data scripting Programming Intermediate No
Transient FEM analysis Transient FEM analysis Yes
Tutorial custom placing of windows and doors Architecture Intermediate 1:00 Vocx 0.18 or above None No
Tutorial for open windows Architecture Beginner 1:00 Vocx 0.18 or above None No
Tutorial FreeCAD POV ray Rendering Intermediate 2:00 Vocx 0.18 or above None No
Tutorial Render with Blender Rendering Intermediate 1:00 Vocx 0.18 or above None No
VRML Preparation for Robot Simulation Robot Workbench Intermediate 0.11.4252ppa1 No
Washers None Yes
Whiffle Ball tutorial Product design Beginner 0:30 r-frank and vocx 0.17 and above WhiffleBall_Tutorial_FCWiki.FCStd No
Wikihouse porting tutorial Wikihouse porting tutorial Intermediate/Advanced 1:00 No


List of Commands
Interface Customization