Tutorials/uk: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
(16 intermediate revisions by the same user not shown)
Line 9: Line 9:


This page presents a selection of high quality written tutorials. A complete, unsorted list of tutorials can be found in [[:Category:Tutorials]], a complete and sortable one can be found in the [[Tutorials#Tutorials - Comprehensive list|table below]].
This page presents a selection of high quality written tutorials. A complete, unsorted list of tutorials can be found in [[:Category:Tutorials]], a complete and sortable one can be found in the [[Tutorials#Tutorials - Comprehensive list|table below]].
Also visit [[Video_tutorials|video tutorials]] and [[Offsite_tutorials|offsite tutorials]] for tutorials hosted on external sites. A useful source of video tutorials is [https://YouTube.com YouTube].


If you'd like to contribute with writing wiki documentation and tutorials, see the general wiki guidelines in [[WikiPages]],
If you'd like to contribute with writing wiki documentation and tutorials, see the general wiki guidelines in [[WikiPages]],
Line 16: Line 14:


Please notice the version of FreeCAD used in the tutorial as some tutorials may use an old version of the program. Although the general modelling process may still work, some tools may have changed.
Please notice the version of FreeCAD used in the tutorial as some tutorials may use an old version of the program. Although the general modelling process may still work, some tools may have changed.

See also [[Video_tutorials|video tutorials]].


==Architecture and BIM==
==Architecture and BIM==
Line 31: Line 31:


FreeCAD provides two main workflows to modeling parts:
FreeCAD provides two main workflows to modeling parts:
* combining objects, a method called [[Constructive solid geometry|Constructive solid geometry]] (CSG) using the [[Part Module|Part workbench]], and
* combining objects, a method called [[Constructive solid geometry|Constructive solid geometry]] (CSG) using the [[Part_Workbench|Part Workbench]], and
* using parametric modelling and [[Feature editing|feature editing]] with the [[PartDesign Workbench|PartDesign Workbench]].
* using parametric modelling and [[Feature editing|feature editing]] with the [[PartDesign Workbench|PartDesign Workbench]].


Line 39: Line 39:
File:GGTuto1 Vue.PNG|link=[[Creating a simple part with PartDesign]]|[[Creating a simple part with PartDesign]] (v0.17)<br/>An introduction to the PartDesign workflow: tracing a sketch, using pad, pocket, and moving the object.
File:GGTuto1 Vue.PNG|link=[[Creating a simple part with PartDesign]]|[[Creating a simple part with PartDesign]] (v0.17)<br/>An introduction to the PartDesign workflow: tracing a sketch, using pad, pocket, and moving the object.
PD WB Tutorial018.png|link=[[Basic_Part_Design_Tutorial]]|[[Basic_Part_Design_Tutorial|Basic Part Design Tutorial]] (v0.17)<br/>Model a simple part using a feature editing methodology: creating a sketch, using pad, external references, pocket, and mirror.
PD WB Tutorial018.png|link=[[Basic_Part_Design_Tutorial]]|[[Basic_Part_Design_Tutorial|Basic Part Design Tutorial]] (v0.17)<br/>Model a simple part using a feature editing methodology: creating a sketch, using pad, external references, pocket, and mirror.
TBHS-model.png|link=[[Toothbrush Head Stand]]|[[Toothbrush Head Stand|Model an electric toothbrush head stand]] (v0.16)<br/>Multiple features used: sketch, distance and coincident constraints, pad, external references, fillet, chamfer, linear pattern, and draft.
TBHS-model.png|link=[[Toothbrush Head Stand]]|[[Toothbrush Head Stand|Model an electric toothbrush head stand]] (v0.16 or above)<br/>Multiple features used: sketch, distance and coincident constraints, pad, external references, fillet, chamfer, linear pattern, and draft.
Exercise lego 01.jpg|link=[[Manual:Modeling for product design]]|[[Manual:Modeling for product design|Modeling for product design]] (v0.16)<br/>Modeling a Lego block: sketches, vertical and horizontal distance constraints, pad, pocket, external reference, linear pattern, and assembly.
Exercise lego 01.jpg|link=[[Manual:Modeling for product design]]|[[Manual:Modeling for product design|Modeling for product design]] (v0.16)<br/>Modeling a Lego block: sketches, vertical and horizontal distance constraints, pad, pocket, external reference, linear pattern, and assembly.
Exercise table complete.jpg|link=[[Manual:Traditional modeling, the CSG way]]|[[Manual:Traditional modeling, the CSG way|Traditional modeling, the CSG way]]<br/>Modeling a table by using simple solids like cubes and cylinders, and performing boolean operations (fusions and cuts) with them.
Exercise table complete.jpg|link=[[Manual:Traditional modeling, the CSG way]]|[[Manual:Traditional modeling, the CSG way|Traditional modeling, the CSG way]]<br/>Modeling a table by using simple solids like cubes and cylinders, and performing boolean operations (fusions and cuts) with them.
Line 65: Line 65:
</gallery>
</gallery>


<gallery>

</gallery>
==Technical Drawings ==
==Technical Drawings ==


Line 91: Line 88:
Path-WalkThroughResult.gif|link=[[Path Walkthrough for the Impatient]]|[[Path Walkthrough for the Impatient|Path Workbench for the impatient]] <br/>This is a quick presentation of the workflow for the Path Workbench: create a job, define the output, define the milling tool, define the path operations, start the simulation, and generate a G-code output file.
Path-WalkThroughResult.gif|link=[[Path Walkthrough for the Impatient]]|[[Path Walkthrough for the Impatient|Path Workbench for the impatient]] <br/>This is a quick presentation of the workflow for the Path Workbench: create a job, define the output, define the milling tool, define the path operations, start the simulation, and generate a G-code output file.
Exercise meshing 03.jpg|link=[[Manual:Preparing models for 3D printing]]|[[Manual:Preparing models for 3D printing|Preparing models for 3D printing]] (v0.16)<br/>Convert a solid object to a mesh object using the Mesh Workbench, export the mesh to STL format, and use Slic3r to prepare the G-code. Alternatively use the Cura Workbench or the Path Workbench to generate the G-code.
Exercise meshing 03.jpg|link=[[Manual:Preparing models for 3D printing]]|[[Manual:Preparing models for 3D printing|Preparing models for 3D printing]] (v0.16)<br/>Convert a solid object to a mesh object using the Mesh Workbench, export the mesh to STL format, and use Slic3r to prepare the G-code. Alternatively use the Cura Workbench or the Path Workbench to generate the G-code.
</gallery>

==Import and Export ==

<gallery mode=packed heights=200px style="font-size:1.1em">
Dxf Importer Install 11.png|link=[[Dxf Importer Install]]|[[Dxf Importer Install|DXF importer installation]] <br/>Install the DXF importer program in you system, so that you can open DXF and DWG files with FreeCAD.
</gallery>
</gallery>


Line 109: Line 100:


==Robot workbench ==
==Robot workbench ==

{{VeryImportantMessage|Development of the [[Robot_Workbench|Robot Workbench]] is currently abandoned. Please inquire on our forum regarding any news or alternative workbenches.}}
{{VeryImportantMessage|Development of the [[Robot_Workbench|Robot Workbench]] is currently abandoned. Please inquire on our forum regarding any news or alternative workbenches.}}

<gallery mode=packed heights=200px style="font-size:1.1em">
<gallery mode=packed heights=200px style="font-size:1.1em">
Robot Tutorial RobotSimulation.gif|link=[[Robot tutorial]]|[[Robot_tutorial|Robot tutorial]] (v0.17) <br/>Simulate the movement of an industrial robot: set up a trajectory, set up home position, change the robot position, insert various waypoints, and simulate the robot movement.
Robot Tutorial RobotSimulation.gif|link=[[Robot tutorial]]|[[Robot_tutorial|Robot tutorial]] (v0.17) <br/>Simulate the movement of an industrial robot: set up a trajectory, set up home position, change the robot position, insert various waypoints, and simulate the robot movement.
</gallery>

== Plotting ==
<gallery mode=packed heights=200px style="font-size:1.1em">
Plot_Trigonometric_Example.png|link=[[Plot Basic tutorial]]|[[Plot Basic tutorial|Basic plot]] <br/>Draw simple mathematical functions in the Plot Workbench using the underlying Python plotting libraries: define the input list (X), two output lists (Y1, Y2), plot the functions (Y1 and Y2 against X), set the grid, line styles, legends, axes labels, plot title, and save the plot.
Plot_MultiAxes_Example.png|link=[[Plot MultiAxes tutorial]]|[[Plot MultiAxes tutorial|Multiaxes plot]] <br/>Draw a more complicated plot in the Plot Workbench with two different input lists (X, T), and three output lists (Y1, Y2, Y3), then create two sets of axes in the same plot, and plot the pairs of lists (Y1 against X, and Y2 and Y3 against T); set the axes labels and grid, and move the legends and title.
</gallery>
</gallery>


Line 126: Line 113:
* [[How_to_install_macros|How to install macros]]
* [[How_to_install_macros|How to install macros]]
* [[How_to_install_additional_workbenches|How to install additional workbenches]]
* [[How_to_install_additional_workbenches|How to install additional workbenches]]

== Drawings ==
{{VeryImportantMessage|Development of the [[Drawing Workbench]] stopped in FreeCAD 0.16. Consider using the [[TechDraw Workbench]] instead.}}
<gallery mode=packed heights=200px style="font-size:1.1em">
Drawing_tutorial_result.png|link=[[Drawing tutorial]]|[[Special:MyLanguage/Drawing tutorial|Drawing tutorial]] (v0.16)<br/>This is the essential introduction to the tools of the Drawing Workbench to create blueprints.
Exercise drawing 01.jpg|link=[[Manual:Generating 2D drawings]]|[[Manual:Generating 2D drawings|Generating 2D drawings]] (v0.16)<br/>Generate 2D projections of your 3D models, and add dimensions.
</gallery>


== Tutorials - Comprehensive list ==
== Tutorials - Comprehensive list ==
Line 146: Line 126:
! FreeCAD version
! FreeCAD version
! Example files
! Example files
! UnfinishedDocu


<!-- Template for new entries
<!-- Template for new entries
|-
|-
| [[Tutorial]]
| [[Tutorial|Tutorial]]
| Topic
| Topic
| Level
| Level
Line 157: Line 136:
| 1.0
| 1.0
| None
| None
| No
-->
-->


|-
|-
| [[Add_FEM_constraint_tutorial|Add FEM constraint tutorial]]
| [[Add_Button_to_FEM_Toolbar_Tutorial|Add Button to FEM Toolbar Tutorial]]
| Finite Element Analysis
|
|
|
| [[User:JohnWang|JohnWang]]
|
|

|-
| [[Add_FEM_Constraint_Tutorial|Add FEM Constraint Tutorial]]
| Finite Element Analysis
|
|
|
|
Line 168: Line 155:
|
|
|
|
| No


|-
|-
| [[Add_FEM_equation_tutorial|Add FEM equation tutorial]]
| [[Add_FEM_Equation_Tutorial|Add FEM Equation Tutorial]]
| Finite Element Analysis
|
|
|
|
| [[User:JohnWang|JohnWang]]
|
| [[User:M42kus|M42kus]]
|
|
|
|
| No


|-
|-
| [[Aeroplane]]
| [[Aeroplane|Aeroplane]]
| Part Workbench
| Part Workbench
| Beginner
| Beginner
Line 188: Line 173:
|
|
|
|
| No


|-
|-
| [[Analysis of reinforced concrete with FEM]]
| [[Analysis_of_reinforced_concrete_with_FEM|Analysis of reinforced concrete with FEM]]
| Reinforced concrete with FEM
| Reinforced concrete with FEM
| Intermediate
| Intermediate
| 1:00
| 1:00
| [[User:HarryvL | HarryvL]]
| [[User:HarryvL|HarryvL]]
| 0.19 or above
| 0.19 or above
|
|
| No


|-
|-
| [[Arch panel tutorial]]
| [[Arch_panel_tutorial|Arch panel tutorial]]
| Modeling an architectural panel
| Modeling an architectural panel
| Beginner
| Beginner
Line 208: Line 191:
|
|
|
|
| No


|-
|-
| [[Arch tutorial]]
| [[Arch_tutorial|Arch tutorial]]
| Modeling
| Modeling
| Intermediate
| Intermediate
|
|
| [[User:Yorik | Yorik]]
| [[User:Yorik|Yorik]]
| 0.14
| 0.14
|
|
| No


|-
|-
| [[Basic Attachment Tutorial]]
| [[Basic_Attachment_Tutorial|Basic Attachment Tutorial]]
| Sketch attachment
| Sketch attachment
| Beginner/intermediate
| Beginner/intermediate
| 01:00
| 01:00
| [[User:Bance | Bance]]
| [[User:Bance|Bance]]
| 0.17 and above
| 0.17 and above
| [https://github.com/BanceFC/Examples/blob/master/Basic_Attachment_Tutorial.FCStd Basic Attachment Tutorial.FCStd]
| [https://github.com/BanceFC/Examples/blob/master/Basic_Attachment_Tutorial.FCStd Basic Attachment Tutorial.FCStd]
| yes


|-
|-
| [[Basic modeling tutorial]]
| [[Basic_modeling_tutorial|Basic modeling tutorial]]
| Introduction to modelling
| Introduction to modelling
| Beginner
| Beginner
| 0:15
| 0:15
| [[User:NormandC | NormandC]]
| [[User:NormandC|NormandC]]
| Any
| Any
| None
| None
| No


|-
|-
| [[Basic_Part_Design_Tutorial | Basic Part Design Tutorial]]
| [[Basic_Part_Design_Tutorial|Basic Part Design Tutorial]]
| Modeling
| Modeling
| Beginner
| Beginner
|
|
| [[User:Quick61 | Mark Stephen (Quick61)]] and [[User:HarryGeier | HarryGeier]]
| [[User:Quick61|Mark Stephen (Quick61)]] and [[User:HarryGeier|HarryGeier]]
| 0.17 or above
| 0.17 or above
| [https://github.com/FreeCAD/Examples/blob/master/Basic_Part_Design_Tutorial_Example_017_Files/Basic_Part_Design_Tutorial_017.fcstd Basic Part Design for v0.17]
| [https://github.com/FreeCAD/Examples/blob/master/Basic_Part_Design_Tutorial_Example_017_Files/Basic_Part_Design_Tutorial_017.fcstd Basic Part Design for v0.17]
| No


|-
|-
| [[Basic Sketcher Tutorial]]
| [[Basic_Sketcher_Tutorial|Basic Sketcher Tutorial]]
| Sketcher
| Sketcher
| Beginner
| Beginner
| 1:00
| 1:00
| [[User:Drei | Drei]] and [[User:Vocx | Vocx]]
| [[User:Drei|Drei]] and [[User:Vocx|Vocx]]
| 0.19
| 0.19
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=43594 Basic Sketcher tutorial ]
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=43594 Basic Sketcher tutorial ]
| No


|-
|-
| [[Basic TechDraw Tutorial]]
| [[Basic_TechDraw_Tutorial|Basic TechDraw Tutorial]]
| TechDraw Workbench
| Modeling
| Beginner
| Beginner
|
|
| [[User:WandererFan | WandererFan]]
| [[User:WandererFan|WandererFan]]
| 0.17 and above
| 0.17 and above
| [https://github.com/FreeCAD/Examples/blob/master/Basic_Part_Design_Tutorial_Example_017_Files/Basic_Part_Design_Tutorial_017.fcstd Basic Part Design for v0.17 Sample] [https://github.com/FreeCAD/Examples/blob/master/Basic_TechDraw_Tutorial_Example_Files/Basic_TechDraw_Tutorial.fcstd Basic TechDraw Tutorial Sample]
| [https://github.com/FreeCAD/Examples/blob/master/Basic_Part_Design_Tutorial_Example_017_Files/Basic_Part_Design_Tutorial_017.fcstd Basic Part Design for v0.17 Sample] [https://github.com/FreeCAD/Examples/blob/master/Basic_TechDraw_Tutorial_Example_Files/Basic_TechDraw_Tutorial.fcstd Basic TechDraw Tutorial Sample]
| No


|-
|-
| [[Code snippets]]
| [[Code_snippets|Code snippets]]
| Python
| Python
| Beginner
| Beginner
Line 278: Line 254:
|
|
|
|
| No


|-
|-
| [[Creating a simple part with PartDesign]]
| [[Creating_a_simple_part_with_PartDesign|Creating a simple part with PartDesign]]
| Modeling
| Modeling
| Beginner
| Beginner
Line 288: Line 263:
| 0.17 or above
| 0.17 or above
| [https://github.com/FreeCAD/Examples/blob/master/Creating_a_simple_PartDesign_Body.FCStd Creating a simple PartDesign Body.FCStd]
| [https://github.com/FreeCAD/Examples/blob/master/Creating_a_simple_PartDesign_Body.FCStd Creating a simple PartDesign Body.FCStd]
| No


|-
|-
| [[Customize Toolbars]]
| [[Customize_Toolbars|Customize Toolbars]]
|
|
| Beginner
| Beginner
| 0:05
| 0:05
| [[User:Mario52 | Mario52]]
| [[User:Mario52|Mario52]]
| Any
| Any
| None
| None
| No


|-
|-
| [[Draft ShapeString tutorial]]
| [[Draft_ShapeString_tutorial|Draft ShapeString tutorial]]
| Product Design
| Product Design
| Beginner
| Beginner
Line 308: Line 281:
| 0.17 and above
| 0.17 and above
| [https://github.com/FreeCAD/Examples/blob/master/Draft_Shapestring_Tutorial_Examples/Draft_Shapestring_Tutorial_Text.FCStd?raw=true Draft_Shapestring_Text]
| [https://github.com/FreeCAD/Examples/blob/master/Draft_Shapestring_Tutorial_Examples/Draft_Shapestring_Tutorial_Text.FCStd?raw=true Draft_Shapestring_Text]
| No


|-
|-
| [[Draft tutorial]]
| [[Draft_tutorial|Draft tutorial]]
| Drafting
| Drafting
| Beginner
| Beginner
| 0:30
| 0:30
| [[User:Drei | Drei]] and vocx
| [[User:Drei|Drei]] and vocx
| 0.19
| 0.19
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=43651 Draft tutorial updated]
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=43651 Draft tutorial updated]
| No


|-
|-
| [[Drawing Template HowTo]]
| [[Drawing_Template_HowTo|Drawing Template HowTo (obsolete)]]
| 2D Drafting
| 2D Drafting
| Intermediate
| Intermediate
| 1:00
| 1:00
| [[User:Quick61 | Mark Stephen (Quick61)]]
| [[User:Quick61|Mark Stephen (Quick61)]]
| 0.14.3700 or greater or above
| 0.14.3700 or above
| None
| None
| No


|-
|-
| [[Drawing tutorial | Drawing tutorial (obsolete)]]
| [[Drawing_tutorial|Drawing tutorial (obsolete)]]
| Blueprints / Drawings
| Blueprints / Drawings
| Beginner
| Beginner
| 0:15
| 0:15
| [[User:Drei | Drei]]
| [[User:Drei|Drei]]
| 0.16 or above
| 0.16 or above
|
|
| No


|-
|-
| [[Dxf Importer Install]]
| [[Dxf_Importer_Install|Dxf Importer Install]]
|
|
| Intermediate
| Intermediate
| 0:05
| 0:05
| [[User:Mario52 | Mario52]]
| [[User:Mario52|Mario52]]
| Any
| Any
| None
| None
| No


|-
|-
| [[Engine Block Tutorial]]
| [[Engine_Block_Tutorial|Engine Block Tutorial]]
| Part Workbench
| Part Workbench
| Beginner
| Beginner
Line 358: Line 326:
| 0.14.3700
| 0.14.3700
|
|
| Yes


|-
|-
| [[Export to STL or OBJ]]
| [[Export_to_STL_or_OBJ|Export to STL or OBJ]]
| Export to STL or OBJ
| Export to STL or OBJ
| Beginner
| Beginner
Line 368: Line 335:
| 0.16.6703
| 0.16.6703
|
|
| No


|-
|-
| [[Extend FEM Module]]
| [[Extend_FEM_Module|Extend FEM Module]]
| Finite Element Analysis
|
|
|
|
| [[User:M42kus|M42kus]]
|
|
| [[User:M42kus | M42kus]]
|
|
|
| No

|-
| [[FEM Beginner tutorial]]
| FEM Beginner tutorial
| Beginner
|
| thschrader
| 0.17.11622+
| [https://github.com/FreeCAD/Examples/blob/master/Whiffle_Ball_Tutorial_ExampleFiles/WhiffleBall_Tutorial_FCWiki.FCStd?raw=true Whiffle Ball]
| Yes


|-
|-
| [[FEM CalculiX Cantilever 3D]]
| [[FEM_CalculiX_Cantilever_3D|FEM CalculiX Cantilever 3D]]
| Finite Element Analysis
| Finite Element Analysis
| Beginner
| Beginner
| 0:10
| 0:10
| [[User:Bernd | Bernd]]
| [[User:Bernd|Bernd]]
| 0.16.6377 or above
| 0.16.6377 or above
|
|
| No


|-
|-
| [[FEM Shear of a Composite Block]]
| [[FEM_Shear_of_a_Composite_Block|FEM Shear of a Composite Block]]
| Finite Element Analysis
| Finite Element Analysis
| Beginner/Intermediate
| Beginner/Intermediate
| 0:300
| 0:300
| [[User:HarryvL | HarryvL]]
| [[User:HarryvL|HarryvL]]
| 0.17.12960 or above
| 0.17.12960 or above
|
|
| No


|-
|-
| [[FEM tutorial]]
| [[FEM_tutorial|FEM tutorial]]
| Finite Element Analysis
| Finite Element Analysis
| Beginner
| Beginner
| 0:10
| 0:10
| [[User:Drei | Drei]]
| [[User:Drei|Drei]]
| 0.16.6700 or above
| 0.16.6700 or above
|
|
| No


|-
|-
| [[FEM Tutorial Python]]
| [[FEM_Tutorial_Python|FEM Tutorial Python]]
| Finite Element Analysis
| Finite Element Analysis
| Intermediate
| Intermediate
| 0:30
| 0:30
| [[User:Bernd | Bernd]]
| [[User:Bernd|Bernd]]
| 0.18.15985 or above
| 0.18.15985 or above
|
|
| No


|-
|-
| [[FreeCAD-Ship s60 tutorial]]
| [[FreeCAD-Ship_s60_tutorial|FreeCAD-Ship s60 tutorial]]
| Ship Workbench
| Ship Workbench
| Beginner
| Beginner
Line 438: Line 389:
|
|
|
|
| No


|-
|-
| [[FreeCAD-Ship s60 tutorial (II)]]
| [[FreeCAD-Ship_s60_tutorial_(II)|FreeCAD-Ship s60 tutorial (II)]]
| Ship Workbench
| Ship Workbench
| Beginner
| Beginner
Line 448: Line 398:
|
|
|
|
| No


|-
|-
| [[How to install additional workbenches]]
| [[How_to_install_additional_workbenches|How to install additional workbenches]]
| Programming
| Programming
| Medium programmer
| Medium programmer
| 0:15
| 0:15
| [[User:R-frank | r-frank]]
| [[User:R-frank|r-frank]]
| Any
| Any
| None
| None
| No


|-
|-
| [[How to install macros]]
| [[How_to_install_macros|How to install macros]]
| Programming
| Programming
| Medium programmer
| Medium programmer
| 0:15
| 0:15
| [[User:Mario52 | Mario52]]
| [[User:Mario52|Mario52]]
| Any
| Any
| None
| None
| No


|-
|-
| [[Import from STL or OBJ]]
| [[Import_from_STL_or_OBJ|Import from STL or OBJ]]
| Import from STL or OBJ
| Import from STL or OBJ
| Beginner
| Beginner
Line 478: Line 425:
| 1.0
| 1.0
| 0.16.6703
| 0.16.6703
| No


|-
|-
| [[Import OpenSCAD code]]
| [[Import_OpenSCAD_code|Import OpenSCAD code]]
| Import OpenSCAD code
| Import OpenSCAD code
| Beginner
| Beginner
Line 488: Line 434:
| 0.16.6704
| 0.16.6704
| None
| None
| No


|-
|-
| [[Import text and geometry from Inkscape]]
| [[Import_text_and_geometry_from_Inkscape|Import text and geometry from Inkscape]]
| Import text and geometry from Inkscape
| Import text and geometry from Inkscape
| Beginner
| Beginner
Line 498: Line 443:
| 0.16.6704
| 0.16.6704
|
|
| No


|-
|-
| [[Import/Export_IFC_-_compiling_IfcOpenShell|Import/Export IFC - compiling IfcOpenShell]]
| [[Measurement_Of_Angles_On_Holes]]
| TechDraw Workbench
| Base
| 0:01
| AnHi
| 0.19
|
| No


|-
| [[Import/Export IFC - compiling IfcOpenShell]]
| Arch Workbench
| Arch Workbench
| Advanced
| Advanced
Line 519: Line 452:
|
|
|
|
| No


|-
|-
| [[Measurement_Of_Angles_On_Holes|Measurement Of Angles On Holes]]
| [[PartDesign tutorial]]
| TechDraw Workbench
| Beginner
| 0:01
| AnHi
| 0.19
|

|-
| [[PartDesign_Bearingholder_Tutorial_I|PartDesign Bearingholder Tutorial I]]
| Product design - Bearingholder #1
| Beginner
| 60 minutes
| NormandC
|
|

|-
| [[PartDesign_Bearingholder_Tutorial_II|PartDesign Bearingholder Tutorial II]]
| Product design - Bearingholder #2
| Beginner
| 60 minutes
| NormandC
|
|

|-
| [[PartDesign_tutorial|PartDesign tutorial]]
| Sketcher
| Sketcher
| Beginner
| Beginner
| 0:15
| 0:15
| [[User:Drei | Drei]]
| [[User:Drei|Drei]]
| 0.16 or above
| 0.16 or above
|
|
| No


|-
|-
| [[Path Walkthrough for the Impatient]]
| [[Path_Walkthrough_for_the_Impatient|Path Walkthrough for the Impatient]]
| Path Workbench
| Path Workbench
|
|
Line 539: Line 497:
|
|
|
|
| Yes


|-
|-
| [[Plot Basic tutorial]]
| [[Plot_Basic_tutorial|Plot Basic tutorial]]
| Plot Workbench Basic Tutorial
| Plot Workbench Basic Tutorial
| Beginner
| Beginner
Line 549: Line 506:
|
|
|
|
| No


|-
|-
| [[Plot MultiAxes tutorial]]
| [[Plot_MultiAxes_tutorial|Plot MultiAxes tutorial]]
| Plot workbench
| Plot workbench
| Intermediate
| Intermediate
Line 559: Line 515:
|
|
|
|
| No


|-
|-
| [[Post-Processing of FEM Results with Paraview]]
| [[Post-Processing_of_FEM_Results_with_Paraview|Post-Processing of FEM Results with Paraview]]
| Post-Processing of FEM Results with ParaView
| Post-Processing of FEM Results with ParaView
| Intermediate
| Intermediate
| 2:00
| 2:00
| [[User:HarryvL | HarryvL]]
| [[User:HarryvL|HarryvL]]
| 0.19
| 0.19
| [https://forum.freecadweb.org/download/file.php?id=103403 Beam] and [https://forum.freecadweb.org/download/file.php?id=103557 wall]
| [https://forum.freecadweb.org/download/file.php?id=103403 Beam] and [https://forum.freecadweb.org/download/file.php?id=103557 wall]
| No


|-
|-
| [[Python scripting tutorial]]
| [[Python_scripting_tutorial|Python scripting tutorial]]
| Programming
| Programming
| Intermediate
| Intermediate
Line 579: Line 533:
|
|
|
|
| No


|-
|-
| [[Raytracing tutorial]]
| [[Raytracing_tutorial|Raytracing tutorial]]
| Raytracing
| Raytracing
| Beginner
| Beginner
| 0:010
| 0:010
| [[User:Drei | Drei]]
| [[User:Drei|Drei]]
| 0.16 or above
| 0.16 or above
|
|
| No


|-
|-
| [[Robot 6-Axis]]
| [[Robot_6-Axis|Robot 6-Axis]]
| Robot Workbench
| Robot Workbench
| Intermediate
| Intermediate
Line 599: Line 551:
|
|
|
|
| No


|-
|-
| [[Robot tutorial]]
| [[Robot_tutorial|Robot tutorial]]
| Robot Workbench
| Robot Workbench
| Beginner
| Beginner
Line 609: Line 560:
|
|
|
|
| No


|-
|-
| [[Scripted Parts: Ball Bearing - Part 1]]
| [[Scripted_Parts:_Ball_Bearing_-_Part_1|Scripted Parts: Ball Bearing - Part 1]]
| Part Scripting - Ball Bearing #1
| Part Scripting - Ball Bearing #1
| Beginner
| Beginner
Line 619: Line 569:
| 0.16.6706
| 0.16.6706
|
|
| No


|-
|-
| [[Scripted Parts: Ball Bearing - Part 2]]
| [[Scripted_Parts:_Ball_Bearing_-_Part_2|Scripted Parts: Ball Bearing - Part 2]]
| Part Scripting - Ball Bearing #2
| Part Scripting - Ball Bearing #2
| Beginner
| Beginner
Line 629: Line 578:
| 0.16.6706
| 0.16.6706
|
|
| No



|-
|-
| [[Scripts|Scripts]]
| [[PartDesign Bearingholder Tutorial I]]
| Product design - Bearingholder #1
| Beginner
| 60 minutes
| NormandC
|
|
| No


|-
| [[PartDesign Bearingholder Tutorial II]]
| Product design - Bearingholder #2
| Beginner
| 60 minutes
| NormandC
|
|
| No



|-
| [[Scripts]]
| Scripting
| Scripting
| Beginner
| Beginner
Line 663: Line 587:
| 0.19
| 0.19
|
|
| No


|-
|-
| [[Sketcher Micro Tutorial - Constraint Practices]]
| [[Sketcher_Micro_Tutorial_-_Constraint_Practices|Sketcher Micro Tutorial - Constraint Practices]]
| Sketcher
| Sketcher
| Beginner
| Beginner
| 0:30
| 0:30
| [[User:Quick61 | Mark Stephen (Quick61)]] and vocx
| [[User:Quick61|Mark Stephen (Quick61)]] and vocx
| 0.19
| 0.19
| [https://forum.freecadweb.org/viewtopic.php?f=36&p=371659#p371659 Sketcher Constraints practices]
| [https://forum.freecadweb.org/viewtopic.php?f=36&p=371659#p371659 Sketcher Constraints practices]
| No


|-
|-
| [[Sketcher reference]]
| [[Sketcher_reference|Sketcher reference]]
|
|
|
|
Line 683: Line 605:
|
|
|
|
| No


|-
|-
| [[Sketcher requirement for a sketch]]
| [[Sketcher_requirement_for_a_sketch|Sketcher requirement for a sketch]]
| Sketcher
| Sketcher
| Beginner
| Beginner
|
|
| [[User:Maker | Maker]]
| [[User:Maker|Maker]]
|
|
| None
| None
| No


|-
|-
| [[Sketcher Tutorial]]
| [[Sketcher_Tutorial|Sketcher Tutorial]]
| Sketcher
| Sketcher
| Beginner
| Beginner
Line 703: Line 623:
|
|
|
|
| No


|-
|-
| [[TechDraw TemplateHowTo]]
| [[TechDraw_Pitch_Circle_Tutorial|TechDraw Pitch Circle Tutorial]]
| TechDraw Workbench
| Drafting
| Beginner
| 0:10
| Andergrin
| 0.19
| None

|-
| [[TechDraw_TemplateGenerator|TechDraw TemplateGenerator]]
| TechDraw Workbench
| Intermediate
|
| [[User:FBXL5|FBXL5]]
| 0.19
| None

|-
| [[TechDraw_TemplateHowTo|TechDraw TemplateHowTo]]
| TechDraw Workbench
| Intermediate
| Intermediate
| 1:00
| 1:00
Line 713: Line 650:
| 0.17
| 0.17
| None
| None
| No


|-
|-
| [[Thread for Screw Tutorial]]
| [[Thread_for_Screw_Tutorial|Thread for Screw Tutorial]]
| Product design
| Product design
| Advanced
| Advanced
| 1:00
| 1:00
| [[User:DeepSOIC | DeepSOIC]], [[User:Murdic | Murdic]], vocx
| [[User:DeepSOIC|DeepSOIC]], [[User:Murdic|Murdic]], vocx
| 0.19
| 0.19
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=44668 Updated: Thread for screw tutorial]
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=44668 Updated: Thread for screw tutorial]
| No


|-
|-
| [[Toothbrush Head Stand]]
| [[Toothbrush_Head_Stand|Toothbrush Head Stand]]
| Modeling
| Modeling
| Beginner
| Beginner
| 1:00
| 1:00
| [[User:EmmanuelG | EmmanuelG]]
| [[User:EmmanuelG|EmmanuelG]]
| 0.16 or greater
| 0.16 or above
| [https://www.thingiverse.com/thing:2403310 Thingiverse 2403310]
| [https://www.thingiverse.com/thing:2403310 Thingiverse 2403310]
| No


|-
|-
| [[Topological data scripting]]
| [[Topological_data_scripting|Topological data scripting]]
| Programming
| Programming
| Intermediate
| Intermediate
Line 743: Line 677:
|
|
|
|
| No


|-
|-
| [[Transient FEM analysis]]
| [[Transient_FEM_analysis|Transient FEM analysis]]
| Transient FEM analysis
| Transient FEM analysis
|
|
Line 753: Line 686:
|
|
|
|
| Yes


|-
|-
| [[Tutorial custom placing of windows and doors]]
| [[Tutorial_custom_placing_of_windows_and_doors|Tutorial custom placing of windows and doors]]
| Architecture
| Architecture
| Intermediate
| Intermediate
| 1:00
| 1:00
| [[User:Vocx | Vocx]]
| [[User:Vocx|Vocx]]
| 0.18 or above
| 0.18 or above
| None
| None
| No


|-
|-
| [[Tutorial for open windows]]
| [[Tutorial_for_open_windows|Tutorial for open windows]]
| Architecture
| Architecture
| Beginner
| Beginner
| 1:00
| 1:00
| [[User:Vocx | Vocx]]
| [[User:Vocx|Vocx]]
| 0.18 or above
| 0.18 or above
| None
| None
| No


|-
|-
| [[Tutorial FreeCAD POV ray]]
| [[Tutorial_FreeCAD_POV_ray|Tutorial FreeCAD POV ray]]
| Rendering
| Rendering
| Intermediate
| Intermediate
| 2:00
| 2:00
| [[User:Vocx | Vocx]]
| [[User:Vocx|Vocx]]
| 0.18 or above
| 0.18 or above
| None
| None
| No


|-
|-
| [[Tutorial Render with Blender]]
| [[Tutorial_Render_with_Blender|Tutorial Render with Blender]]
| Rendering
| Rendering
| Intermediate
| Intermediate
| 1:00
| 1:00
| [[User:Vocx | Vocx]]
| [[User:Vocx|Vocx]]
| 0.18 or above
| 0.18 or above
| None
| None
| No


|-
|-
| [[VRML Preparation for Robot Simulation]]
| [[VRML_Preparation_for_Robot_Simulation|VRML Preparation for Robot Simulation]]
| Robot Workbench
| Robot Workbench
| Intermediate
| Intermediate
Line 803: Line 731:
| 0.11.4252ppa1
| 0.11.4252ppa1
|
|
| No


|-
|-
| [[Washers]]
| [[Washers|Washers]]
|
|
|
|
Line 813: Line 740:
|
|
| None
| None
| Yes


|-
|-
| [[Whiffle Ball tutorial]]
| [[Whiffle_Ball_tutorial|Whiffle Ball tutorial]]
| Product design
| Product design
| Beginner
| Beginner
Line 823: Line 749:
| 0.17 and above
| 0.17 and above
| [https://github.com/FreeCAD/Examples/blob/master/Whiffle_Ball_Tutorial_ExampleFiles/WhiffleBall_Tutorial_FCWiki.FCStd?raw=true WhiffleBall_Tutorial_FCWiki.FCStd]
| [https://github.com/FreeCAD/Examples/blob/master/Whiffle_Ball_Tutorial_ExampleFiles/WhiffleBall_Tutorial_FCWiki.FCStd?raw=true WhiffleBall_Tutorial_FCWiki.FCStd]
| No


|-
|-
| [[Wikihouse porting tutorial]]
| [[Wikihouse_porting_tutorial|Wikihouse porting tutorial]]
| Wikihouse porting tutorial
| Wikihouse porting tutorial
| Intermediate/Advanced
| Intermediate/Advanced
Line 833: Line 758:
|
|
|
|
| No


|}
|}

Revision as of 20:23, 15 January 2022

This page presents a selection of high quality written tutorials. A complete, unsorted list of tutorials can be found in Category:Tutorials, a complete and sortable one can be found in the table below.

If you'd like to contribute with writing wiki documentation and tutorials, see the general wiki guidelines in WikiPages, and read the tutorial guidelines.

Please notice the version of FreeCAD used in the tutorial as some tutorials may use an old version of the program. Although the general modelling process may still work, some tools may have changed.

See also video tutorials.

Architecture and BIM

Modeling parts

FreeCAD provides two main workflows to modeling parts:

Please note that the PartDesign Workbench workflow was considerably changed from FreeCAD 0.17 onward; some of the tutorials haven't been updated and may refer to the 0.16 version.

The Raspberry Pi project has made simple tutorials that are easy to follow, particularly for those new to CAD systems:

Drafting and Sketching

Technical Drawings

FEM

CNC & 3D Printing

Rendering

Robot workbench

Development of the Robot Workbench is currently abandoned. Please inquire on our forum regarding any news or alternative workbenches.

Scripting

These are tutorials that are related to scripting or programming. They are geared towards more experienced users, who are already somewhat familiar with the program.

Tutorials - Comprehensive list

Here are listed all the tutorials that are not in the manual regardless of their quality. If a tutorial is listed in the Category:Tutorials and not in this table please insert it.

Tutorial Topic Level Time to complete hh:mm Authors FreeCAD version Example files


Add Button to FEM Toolbar Tutorial Finite Element Analysis JohnWang
Add FEM Constraint Tutorial Finite Element Analysis M42kus
Add FEM Equation Tutorial Finite Element Analysis JohnWang
Aeroplane Part Workbench Beginner 0:10 Hughthecat
Analysis of reinforced concrete with FEM Reinforced concrete with FEM Intermediate 1:00 HarryvL 0.19 or above
Arch panel tutorial Modeling an architectural panel Beginner 1:00 Yorik
Arch tutorial Modeling Intermediate Yorik 0.14
Basic Attachment Tutorial Sketch attachment Beginner/intermediate 01:00 Bance 0.17 and above Basic Attachment Tutorial.FCStd
Basic modeling tutorial Introduction to modelling Beginner 0:15 NormandC Any None
Basic Part Design Tutorial Modeling Beginner Mark Stephen (Quick61) and HarryGeier 0.17 or above Basic Part Design for v0.17
Basic Sketcher Tutorial Sketcher Beginner 1:00 Drei and Vocx 0.19 Basic Sketcher tutorial
Basic TechDraw Tutorial TechDraw Workbench Beginner WandererFan 0.17 and above Basic Part Design for v0.17 Sample Basic TechDraw Tutorial Sample
Code snippets Python Beginner
Creating a simple part with PartDesign Modeling Beginner 1:00 GlouGlou 0.17 or above Creating a simple PartDesign Body.FCStd
Customize Toolbars Beginner 0:05 Mario52 Any None
Draft ShapeString tutorial Product Design Beginner 0:30 r-frank and vocx 0.17 and above Draft_Shapestring_Text
Draft tutorial Drafting Beginner 0:30 Drei and vocx 0.19 Draft tutorial updated
Drawing Template HowTo (obsolete) 2D Drafting Intermediate 1:00 Mark Stephen (Quick61) 0.14.3700 or above None
Drawing tutorial (obsolete) Blueprints / Drawings Beginner 0:15 Drei 0.16 or above
Dxf Importer Install Intermediate 0:05 Mario52 Any None
Engine Block Tutorial Part Workbench Beginner 1:00 Andrewbuck40 0.14.3700
Export to STL or OBJ Export to STL or OBJ Beginner 0:20 r-frank 0.16.6703
Extend FEM Module Finite Element Analysis M42kus
FEM CalculiX Cantilever 3D Finite Element Analysis Beginner 0:10 Bernd 0.16.6377 or above
FEM Shear of a Composite Block Finite Element Analysis Beginner/Intermediate 0:300 HarryvL 0.17.12960 or above
FEM tutorial Finite Element Analysis Beginner 0:10 Drei 0.16.6700 or above
FEM Tutorial Python Finite Element Analysis Intermediate 0:30 Bernd 0.18.15985 or above
FreeCAD-Ship s60 tutorial Ship Workbench Beginner
FreeCAD-Ship s60 tutorial (II) Ship Workbench Beginner
How to install additional workbenches Programming Medium programmer 0:15 r-frank Any None
How to install macros Programming Medium programmer 0:15 Mario52 Any None
Import from STL or OBJ Import from STL or OBJ Beginner 0:30 r-frank 1.0 0.16.6703
Import OpenSCAD code Import OpenSCAD code Beginner 0:30 r-frank 0.16.6704 None
Import text and geometry from Inkscape Import text and geometry from Inkscape Beginner 0:30 r-frank 0.16.6704
Import/Export IFC - compiling IfcOpenShell Arch Workbench Advanced 2:00 Pablo Gil
Measurement Of Angles On Holes TechDraw Workbench Beginner 0:01 AnHi 0.19
PartDesign Bearingholder Tutorial I Product design - Bearingholder #1 Beginner 60 minutes NormandC
PartDesign Bearingholder Tutorial II Product design - Bearingholder #2 Beginner 60 minutes NormandC
PartDesign tutorial Sketcher Beginner 0:15 Drei 0.16 or above
Path Walkthrough for the Impatient Path Workbench Chrisb
Plot Basic tutorial Plot Workbench Basic Tutorial Beginner
Plot MultiAxes tutorial Plot workbench Intermediate
Post-Processing of FEM Results with Paraview Post-Processing of FEM Results with ParaView Intermediate 2:00 HarryvL 0.19 Beam and wall
Python scripting tutorial Programming Intermediate
Raytracing tutorial Raytracing Beginner 0:010 Drei 0.16 or above
Robot 6-Axis Robot Workbench Intermediate
Robot tutorial Robot Workbench Beginner r-frank
Scripted Parts: Ball Bearing - Part 1 Part Scripting - Ball Bearing #1 Beginner 0:30 r-frank 0.16.6706
Scripted Parts: Ball Bearing - Part 2 Part Scripting - Ball Bearing #2 Beginner 0:30 r-frank 0.16.6706
Scripts Scripting Beginner onekk Carlo 0.19
Sketcher Micro Tutorial - Constraint Practices Sketcher Beginner 0:30 Mark Stephen (Quick61) and vocx 0.19 Sketcher Constraints practices
Sketcher reference
Sketcher requirement for a sketch Sketcher Beginner Maker None
Sketcher Tutorial Sketcher Beginner Ulrich
TechDraw Pitch Circle Tutorial TechDraw Workbench Beginner 0:10 Andergrin 0.19 None
TechDraw TemplateGenerator TechDraw Workbench Intermediate FBXL5 0.19 None
TechDraw TemplateHowTo TechDraw Workbench Intermediate 1:00 wandererfan 0.17 None
Thread for Screw Tutorial Product design Advanced 1:00 DeepSOIC, Murdic, vocx 0.19 Updated: Thread for screw tutorial
Toothbrush Head Stand Modeling Beginner 1:00 EmmanuelG 0.16 or above Thingiverse 2403310
Topological data scripting Programming Intermediate
Transient FEM analysis Transient FEM analysis
Tutorial custom placing of windows and doors Architecture Intermediate 1:00 Vocx 0.18 or above None
Tutorial for open windows Architecture Beginner 1:00 Vocx 0.18 or above None
Tutorial FreeCAD POV ray Rendering Intermediate 2:00 Vocx 0.18 or above None
Tutorial Render with Blender Rendering Intermediate 1:00 Vocx 0.18 or above None
VRML Preparation for Robot Simulation Robot Workbench Intermediate 0.11.4252ppa1
Washers None
Whiffle Ball tutorial Product design Beginner 0:30 r-frank and vocx 0.17 and above WhiffleBall_Tutorial_FCWiki.FCStd
Wikihouse porting tutorial Wikihouse porting tutorial Intermediate/Advanced 1:00