Tutorials/ro: Difference between revisions
(Updating to match new version of source page) |
No edit summary |
||
(39 intermediate revisions by 3 users not shown) | |||
Line 1: | Line 1: | ||
<languages/> |
<languages/> |
||
{{Docnav |
|||
|[[Frequently_asked_questions|FAQ]] |
|||
|[[Interface_Customization|Interface Customization]] |
|||
}} |
|||
{{TOCright}} |
|||
<div class="mw-translate-fuzzy"> |
|||
Această pagină prezintă o selecție de tutoriale scrise de înaltă calitae. O listă completă și nesortată de tutoriale puteți găsi la : [[:Category:Tutorials]]. |
Această pagină prezintă o selecție de tutoriale scrise de înaltă calitae. O listă completă și nesortată de tutoriale puteți găsi la : [[:Category:Tutorials]]. |
||
</div> |
|||
vizitați [[Offsite tutorials]] și [[Video tutorials]] pentru lista tutorialelor găzduite pe site-uri externe. O sursă utilă de tutoriale video este,[https://YouTube.com YouTube]. |
|||
If you'd like to contribute with writing wiki documentation and tutorials, see the general wiki guidelines in [[WikiPages]], |
If you'd like to contribute with writing wiki documentation and tutorials, see the general wiki guidelines in [[WikiPages]], |
||
Line 8: | Line 16: | ||
Please notice the version of FreeCAD used in the tutorial as some tutorials may use an old version of the program. Although the general modelling process may still work, some tools may have changed. |
Please notice the version of FreeCAD used in the tutorial as some tutorials may use an old version of the program. Although the general modelling process may still work, some tools may have changed. |
||
See also [[Video_tutorials|video tutorials]]. |
|||
==Architectura și Construcții Civile și industriale== |
==Architectura și Construcții Civile și industriale== |
||
<gallery mode=packed |
<gallery mode=packed heights=200px style="font-size:1.1em"> |
||
<div class="mw-translate-fuzzy"> |
<div class="mw-translate-fuzzy"> |
||
Arch tutorial 00.jpg|link=[[Arch tutorial]]|[[Arch tutorial]] <br/>Basele medelării arhitecturale. |
Arch tutorial 00.jpg|link=[[Arch tutorial]]|[[Arch tutorial]] <br/>Basele medelării arhitecturale. |
||
Line 19: | Line 29: | ||
</gallery> |
</gallery> |
||
<div class="mw-translate-fuzzy"> |
|||
==Modelarea Pieselor== |
==Modelarea Pieselor== |
||
</div> |
|||
<div class="mw-translate-fuzzy"> |
|||
FreeCAD furnizează două fluxuri de lucru la modelarea pieselor: combinarea obiectelor (o metodă numită [[wikipedia:Constructive solid geometry|constructive solid geometry (CSG)]]) utilizând [[Part Module|Part workbench]], sau utilizând metoda de editare [[Glossary#Feature|feature]] cu Atelierul PartDesign [[PartDesign Workbench|PartDesign workbench]]. Vă rugăm să notați că PartDesign work flow s-a schimbat considerabil de la v0.17 încoace: unele dintre tutoriale trebuie updatate. |
|||
FreeCAD furnizează două fluxuri de lucru la modelarea pieselor: combinarea obiectelor (o metodă numită [[wikipedia:Constructive solid geometry|constructive solid geometry (CSG)]]) utilizând [[Part_Workbench|Part workbench]], sau utilizând metoda de editare [[Glossary#Feature|feature]] cu Atelierul PartDesign [[PartDesign_Workbench|PartDesign workbench]]. Vă rugăm să notați că PartDesign work flow s-a schimbat considerabil de la v0.17 încoace: unele dintre tutoriale trebuie updatate. |
|||
* combinarea obiectelor, o metodă numită [https://en.wikipedia.org/wiki/Constructive_solid_geometry geometrie solidă constructivă (CSG)] utilizând [[Part Module | Workbench part]] și |
|||
* combinarea obiectelor, o metodă numită [https://en.wikipedia.org/wiki/Constructive_solid_geometry geometrie solidă constructivă (CSG)] utilizând [[Part_Workbench | Workbench part]] și |
|||
* folosind modelarea parametrică și editarea [[Glosar # Caracteristică | caracteristică]] cu [[Workbench Workbench]]. |
|||
* folosind modelarea parametrică și editarea caracteristică cu [[PartDesign_Workbench | PartDesign workbench]]. |
|||
</div> |
|||
<div class="mw-translate-fuzzy"> |
|||
Please note that the [[PartDesign Workbench]] workflow was considerably changed from FreeCAD 0.17 onward; some of the tutorials haven't been updated and may refer to the 0.16 version. |
Please note that the [[PartDesign Workbench]] workflow was considerably changed from FreeCAD 0.17 onward; some of the tutorials haven't been updated and may refer to the 0.16 version. |
||
</div> |
|||
<gallery mode=packed |
<gallery mode=packed heights=200px style="font-size:1.1em"> |
||
<div class="mw-translate-fuzzy"> |
|||
File:GGTuto1 Vue.PNG|link=[[Creating a simple part with PartDesign]]|[[Creating a simple part with PartDesign]] <br/>An intro to v0.17 PartDesign workflow |
File:GGTuto1 Vue.PNG|link=[[Creating a simple part with PartDesign]]|[[Creating a simple part with PartDesign]] <br/>An intro to v0.17 PartDesign workflow |
||
PD WB Tutorial018.png|link=[[Basic Part Design Tutorial 017]]|[[Basic Part Design Tutorial 017]] <br/>Model a simple part using a feature editing methodology (updated for version 0.17) |
PD WB Tutorial018.png|link=[[Basic Part Design Tutorial 017]]|[[Basic Part Design Tutorial 017]] <br/>Model a simple part using a feature editing methodology (updated for version 0.17) |
||
Line 36: | Line 53: | ||
Tutorial WhiffleBall.jpg|link=[[Whiffle Ball tutorial]]|[[Whiffle Ball tutorial|Create a Whiffle Ball]] <br/>from Part primitives. |
Tutorial WhiffleBall.jpg|link=[[Whiffle Ball tutorial]]|[[Whiffle Ball tutorial|Create a Whiffle Ball]] <br/>from Part primitives. |
||
Tutorial-normand06.jpg|link=[[Basic modeling tutorial]]|[[Basic modeling tutorial]] <br/>Create an iron angle in 2 simple methods. |
Tutorial-normand06.jpg|link=[[Basic modeling tutorial]]|[[Basic modeling tutorial]] <br/>Create an iron angle in 2 simple methods. |
||
</div> |
|||
</gallery> |
</gallery> |
||
The Raspberry Pi project has made simple tutorials that are easy to follow, particularly for those new to CAD systems: |
|||
* [https://projects.raspberrypi.org/en/projects/freecad-dice freecad-dice], model a die with six faces, and optionally 3D print it. |
|||
* [https://projects.raspberrypi.org/en/projects/freecad-headphone-tidy freecad-headphone-tidy], model a spool to organize and store earphones, and optionally 3D print it. |
|||
* [https://projects.raspberrypi.org/en/projects/freecad-chess-set freecad-chess-set], model and entire chess set in Bauhaus modernist style. |
|||
* [https://github.com/raspberrypilearning?utf8=%E2%9C%93&q=freecad&type=source&language= raspberrypilearning] repository (CC-BY 4.0) with other examples. |
|||
==Desen 2 D și Sketching == |
==Desen 2 D și Sketching == |
||
<gallery mode=packed |
<gallery mode=packed heights=200px style="font-size:1.1em"> |
||
<div class="mw-translate-fuzzy"> |
<div class="mw-translate-fuzzy"> |
||
Exercise cabin 01.jpg|link=[[Manual:Traditional 2D drafting]]|[[Manual:Traditional 2D drafting|Traditional 2D drafting]] |
Exercise cabin 01.jpg|link=[[Manual:Traditional 2D drafting]]|[[Manual:Traditional 2D drafting|Traditional 2D drafting]] |
||
Draft_tutorial_result.png|link=[[Draft tutorial]]|[[Draft tutorial]] <br/>Introducerea în atelierul Desen 2 D( Draft workbench) . |
Draft_tutorial_result.png|link=[[Draft tutorial]]|[[Draft tutorial]] <br/>Introducerea în atelierul Desen 2 D( Draft workbench) . |
||
Sketcher tutorial result.png|Link=[[ |
Sketcher tutorial result.png|Link=[[Basic_Sketcher_Tutorial/ro]]|[[Basic_Sketcher_Tutorial/ro|Basic Sketcher Tutorial]] <br/>Introducere în Sketcher. |
||
Constrain3.png|link=[[Sketcher Micro Tutorial - Constraint Practices]]|[[Sketcher Micro Tutorial - Constraint Practices|Sketcher Micro Tutorial]] <br/> Învățai să constrângeți eficient un pătrat. |
Constrain3.png|link=[[Sketcher Micro Tutorial - Constraint Practices]]|[[Sketcher Micro Tutorial - Constraint Practices|Sketcher Micro Tutorial]] <br/> Învățai să constrângeți eficient un pătrat. |
||
</div> |
</div> |
||
</gallery> |
</gallery> |
||
<div class="mw-translate-fuzzy"> |
|||
==Desenul Technic== |
==Desenul Technic== |
||
</div> |
|||
<gallery mode=packed |
<gallery mode=packed heights=200px style="font-size:1.1em"> |
||
<div class="mw-translate-fuzzy"> |
|||
TDTut ProjGroup21.png|link=[[Basic TechDraw Tutorial]]|[[Basic TechDraw Tutorial|Basic TechDraw Tutorial]]<br/>Intro to creating drawings with the TechDraw workbench. |
TDTut ProjGroup21.png|link=[[Basic TechDraw Tutorial]]|[[Basic TechDraw Tutorial|Basic TechDraw Tutorial]]<br/>Intro to creating drawings with the TechDraw workbench. |
||
File:FCTemplateHow.png|link=[[TechDraw_TemplateHowTo]]|[[TechDraw_TemplateHowTo|Creating a new background template]]<br/>Instructions to create a new page template in Inkscape for using with the TechDraw Workbench. |
File:FCTemplateHow.png|link=[[TechDraw_TemplateHowTo]]|[[TechDraw_TemplateHowTo|Creating a new background template]]<br/>Instructions to create a new page template in Inkscape for using with the TechDraw Workbench. |
||
</div> |
|||
</gallery> |
</gallery> |
||
==MEF == |
==MEF == |
||
<gallery mode=packed |
<gallery mode=packed heights=200px style="font-size:1.1em"> |
||
<div class="mw-translate-fuzzy"> |
|||
FEM example01 pic00.jpg|link=[[FEM CalculiX Cantilever 3D]]|[[FEM CalculiX Cantilever 3D|FEM Analysis example]] |
FEM example01 pic00.jpg|link=[[FEM CalculiX Cantilever 3D]]|[[FEM CalculiX Cantilever 3D|FEM Analysis example]] |
||
Figure 11 Deformed Mesh.png|link=[[FEM Shear of a Composite Block]]|[[FEM Shear of a Composite Block]] |
Figure 11 Deformed Mesh.png|link=[[FEM Shear of a Composite Block]]|[[FEM Shear of a Composite Block]] |
||
FEM tutorial result.png|link=[[FEM tutorial]]|[[FEM tutorial]] <br/>Introducerea în atelierul MEF (FEM workbench). |
FEM tutorial result.png|link=[[FEM tutorial]]|[[FEM tutorial]] <br/>Introducerea în atelierul MEF (FEM workbench). |
||
</div> |
|||
</gallery> |
</gallery> |
||
==CNC & 3D Printing == |
==CNC & 3D Printing == |
||
<gallery mode=packed |
<gallery mode=packed heights=200px style="font-size:1.1em"> |
||
<div class="mw-translate-fuzzy"> |
|||
Path-WalkThroughResult.gif|link=[[Path Walkthrough for the Impatient]]|[[Path Walkthrough for the Impatient]] <br/>Prezentarea rapidă a Atelierului Traiectorie (Path module). |
Path-WalkThroughResult.gif|link=[[Path Walkthrough for the Impatient]]|[[Path Walkthrough for the Impatient]] <br/>Prezentarea rapidă a Atelierului Traiectorie (Path module). |
||
Exercise meshing 03.jpg|link=[[Manual:Preparing models for 3D printing]]|[[Manual:Preparing models for 3D printing|Preparing models for 3D printing]] |
Exercise meshing 03.jpg|link=[[Manual:Preparing models for 3D printing]]|[[Manual:Preparing models for 3D printing|Preparing models for 3D printing]] |
||
</ |
</div> |
||
==Import și Export == |
|||
<gallery mode=packed-overlay heights=200px style="font-size:1.1em"> |
|||
Dxf Importer Install 11.png|link=[[Dxf Importer Install]]|[[Dxf Importer Install]] <br/>Instalarea manuală a bibliotecii DXF import . |
|||
</gallery> |
</gallery> |
||
==Randare == |
==Randare == |
||
<gallery mode=packed |
<gallery mode=packed heights=200px style="font-size:1.1em"> |
||
<div class="mw-translate-fuzzy"> |
|||
Exercise raytracing 05.jpg|link=[[Manual:Creating renderings]]|[[Manual:Creating renderings|Creating renderings]] <br/>With POV-Ray and LuxRender. |
Exercise raytracing 05.jpg|link=[[Manual:Creating renderings]]|[[Manual:Creating renderings|Creating renderings]] <br/>With POV-Ray and LuxRender. |
||
Raytracing tutorial result.png|link=[[Raytracing tutorial]]|[[Raytracing tutorial]] <br/>Introduce fluxului de muncă a Atelierului de Randare(Raytracing workbench). |
Raytracing tutorial result.png|link=[[Raytracing tutorial]]|[[Raytracing tutorial]] <br/>Introduce fluxului de muncă a Atelierului de Randare(Raytracing workbench). |
||
</div> |
|||
</gallery> |
</gallery> |
||
==Robot workbench == |
|||
<div class="mw-translate-fuzzy"> |
|||
==Atelierul Robotică == |
==Atelierul Robotică == |
||
</div> |
|||
<gallery mode=packed |
<gallery mode=packed heights=200px style="font-size:1.1em"> |
||
<div class="mw-translate-fuzzy"> |
|||
Robot Tutorial RobotSimulation.gif|link=[[Robot tutorial]]|[[Robot tutorial]] <br/>simularea mișcării la Robot. |
Robot Tutorial RobotSimulation.gif|link=[[Robot tutorial]]|[[Robot tutorial]] <br/>simularea mișcării la Robot. |
||
</div> |
|||
</gallery> |
</gallery> |
||
== |
== Scripting == |
||
<gallery mode=packed-overlay heights=200px style="font-size:1.1em"> |
|||
Plot_Trigonometric_Example.png|link=[[Plot Basic tutorial]]|[[Plot Basic tutorial]]<br/>The basic tutorial to drawing mathematical plots in FreeCAD. |
|||
Plot_MultiAxes_Example.png|link=[[Plot MultiAxes tutorial]]|[[Plot MultiAxes tutorial]]<br/>Draw several axes and several plots in the same figure. |
|||
</gallery> |
|||
These are tutorials that are related to scripting or programming. They are geared towards more experienced users, who are already somewhat familiar with the program. |
|||
== Drawings == |
|||
* [[Python_scripting_tutorial|Python scripting tutorial]] |
|||
{{VeryImportantMessage|Development of the [[Drawing Workbench]] a fost oprit în FreeCAD 0.16. Luați în considerare utilizare [[TechDraw Workbench]] instead.}} |
|||
* [[How_to_install_macros|How to install macros]] |
|||
<gallery mode=packed-overlay heights=200px style="font-size:1.1em"> |
|||
* [[How_to_install_additional_workbenches|How to install additional workbenches]] |
|||
Drawing_tutorial_result.png|link=[[Drawing tutorial]]|[[Drawing tutorial]] <br/>Intro to creating blueprints with the Drawing workbench. |
|||
Exercise drawing 01.jpg|link=[[Manual:Generating 2D drawings]]|[[Manual:Generating 2D drawings|Generating 2D drawings]] |
|||
</gallery> |
|||
== Tutorials - Comprehensive list == |
|||
Here are listed all the tutorials that are not in the manual '''regardless of their quality'''. If a tutorial is listed in the [[:Category:Tutorials]] and not in this table please insert it. |
|||
{| class="wikitable sortable" |
|||
|- |
|||
! Tutorial |
|||
! Topic |
|||
! Level |
|||
! Time to complete hh:mm |
|||
! Authors |
|||
! FreeCAD version |
|||
! Example files |
|||
<!-- Template for new entries |
|||
|- |
|||
| [[Tutorial|Tutorial]] |
|||
| Topic |
|||
| Level |
|||
| 0:00 |
|||
| [[User:Name|Name]] |
|||
| 1.0 |
|||
| None |
|||
--> |
|||
|- |
|||
| [[Add_Button_to_FEM_Toolbar_Tutorial|Add Button to FEM Toolbar Tutorial]] |
|||
| Finite Element Analysis |
|||
| |
|||
| |
|||
| [[User:JohnWang|JohnWang]] |
|||
| |
|||
| |
|||
|- |
|||
| [[Add_FEM_Constraint_Tutorial|Add FEM Constraint Tutorial]] |
|||
| Finite Element Analysis |
|||
| |
|||
| |
|||
| [[User:M42kus|M42kus]] |
|||
| |
|||
| |
|||
|- |
|||
| [[Add_FEM_Equation_Tutorial|Add FEM Equation Tutorial]] |
|||
| Finite Element Analysis |
|||
| |
|||
| |
|||
| [[User:JohnWang|JohnWang]] |
|||
| |
|||
| |
|||
<div class="mw-translate-fuzzy"> |
|||
|- |
|||
| [[Aeroplane/ro|Aeroplane]] |
|||
| Part Workbench |
|||
| Beginner |
|||
| 0:10 |
|||
| Hughthecat |
|||
| |
|||
| |
|||
| No |
|||
</div> |
|||
|- |
|||
| [[Analysis_of_reinforced_concrete_with_FEM|Analysis of reinforced concrete with FEM]] |
|||
| Reinforced concrete with FEM |
|||
| Intermediate |
|||
| 1:00 |
|||
| [[User:HarryvL|HarryvL]] |
|||
| 0.19 or above |
|||
| |
|||
|- |
|||
| [[Arch_panel_tutorial|Arch panel tutorial]] |
|||
| Modeling an architectural panel |
|||
| Beginner |
|||
| 1:00 |
|||
| Yorik |
|||
| |
|||
| |
|||
|- |
|||
| [[Arch_tutorial|Arch tutorial]] |
|||
| Modeling |
|||
| Intermediate |
|||
| |
|||
| [[User:Yorik|Yorik]] |
|||
| 0.14 |
|||
| |
|||
|- |
|||
| [[Basic_Attachment_Tutorial|Basic Attachment Tutorial]] |
|||
| Sketch attachment |
|||
| Beginner/intermediate |
|||
| 01:00 |
|||
| [[User:Bance|Bance]] |
|||
| 0.17 and above |
|||
| [https://github.com/BanceFC/Examples/blob/master/Basic_Attachment_Tutorial.FCStd Basic Attachment Tutorial.FCStd] |
|||
|- |
|||
| [[Basic_modeling_tutorial|Basic modeling tutorial]] |
|||
| Introduction to modelling |
|||
| Beginner |
|||
| 0:15 |
|||
| [[User:NormandC|NormandC]] |
|||
| Any |
|||
| None |
|||
|- |
|||
| [[Basic_Part_Design_Tutorial|Basic Part Design Tutorial]] |
|||
| Modeling |
|||
| Beginner |
|||
| |
|||
| [[User:Quick61|Mark Stephen (Quick61)]] and [[User:HarryGeier|HarryGeier]] |
|||
| 0.17 or above |
|||
| [https://github.com/FreeCAD/Examples/blob/master/Basic_Part_Design_Tutorial_Example_017_Files/Basic_Part_Design_Tutorial_017.fcstd Basic Part Design for v0.17] |
|||
|- |
|||
| [[Basic_Sketcher_Tutorial|Basic Sketcher Tutorial]] |
|||
| Sketcher |
|||
| Beginner |
|||
| 1:00 |
|||
| [[User:Drei|Drei]] and [[User:Vocx|Vocx]] |
|||
| 0.19 |
|||
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=43594 Basic Sketcher tutorial ] |
|||
|- |
|||
| [[Basic_TechDraw_Tutorial|Basic TechDraw Tutorial]] |
|||
| TechDraw Workbench |
|||
| Beginner |
|||
| |
|||
| [[User:WandererFan|WandererFan]] |
|||
| 0.17 and above |
|||
| [https://github.com/FreeCAD/Examples/blob/master/Basic_Part_Design_Tutorial_Example_017_Files/Basic_Part_Design_Tutorial_017.fcstd Basic Part Design for v0.17 Sample] [https://github.com/FreeCAD/Examples/blob/master/Basic_TechDraw_Tutorial_Example_Files/Basic_TechDraw_Tutorial.fcstd Basic TechDraw Tutorial Sample] |
|||
|- |
|||
| [[Code_snippets|Code snippets]] |
|||
| Python |
|||
| Beginner |
|||
| |
|||
| |
|||
| |
|||
| |
|||
|- |
|||
| [[Creating_a_simple_part_with_PartDesign|Creating a simple part with PartDesign]] |
|||
| Modeling |
|||
| Beginner |
|||
| 1:00 |
|||
| GlouGlou |
|||
| 0.17 or above |
|||
| [https://github.com/FreeCAD/Examples/blob/master/Creating_a_simple_PartDesign_Body.FCStd Creating a simple PartDesign Body.FCStd] |
|||
|- |
|||
| [[Customize_Toolbars|Customize Toolbars]] |
|||
| |
|||
| Beginner |
|||
| 0:05 |
|||
| [[User:Mario52|Mario52]] |
|||
| Any |
|||
| None |
|||
|- |
|||
| [[Draft_ShapeString_tutorial|Draft ShapeString tutorial]] |
|||
| Product Design |
|||
| Beginner |
|||
| 0:30 |
|||
| r-frank and vocx |
|||
| 0.17 and above |
|||
| [https://github.com/FreeCAD/Examples/blob/master/Draft_Shapestring_Tutorial_Examples/Draft_Shapestring_Tutorial_Text.FCStd?raw=true Draft_Shapestring_Text] |
|||
|- |
|||
| [[Draft_tutorial|Draft tutorial]] |
|||
| Drafting |
|||
| Beginner |
|||
| 0:30 |
|||
| [[User:Drei|Drei]] and vocx |
|||
| 0.19 |
|||
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=43651 Draft tutorial updated] |
|||
|- |
|||
| [[Drawing_Template_HowTo|Drawing Template HowTo (obsolete)]] |
|||
| 2D Drafting |
|||
| Intermediate |
|||
| 1:00 |
|||
| [[User:Quick61|Mark Stephen (Quick61)]] |
|||
| 0.14.3700 or above |
|||
| None |
|||
|- |
|||
| [[Drawing_tutorial|Drawing tutorial (obsolete)]] |
|||
| Blueprints / Drawings |
|||
| Beginner |
|||
| 0:15 |
|||
| [[User:Drei|Drei]] |
|||
| 0.16 or above |
|||
| |
|||
|- |
|||
| [[Dxf_Importer_Install|Dxf Importer Install]] |
|||
| |
|||
| Intermediate |
|||
| 0:05 |
|||
| [[User:Mario52|Mario52]] |
|||
| Any |
|||
| None |
|||
|- |
|||
| [[Engine_Block_Tutorial|Engine Block Tutorial]] |
|||
| Part Workbench |
|||
| Beginner |
|||
| 1:00 |
|||
| Andrewbuck40 |
|||
| 0.14.3700 |
|||
| |
|||
|- |
|||
| [[Export_to_STL_or_OBJ|Export to STL or OBJ]] |
|||
| Export to STL or OBJ |
|||
| Beginner |
|||
| 0:20 |
|||
| r-frank |
|||
| 0.16.6703 |
|||
| |
|||
|- |
|||
| [[Extend_FEM_Module|Extend FEM Module]] |
|||
| Finite Element Analysis |
|||
| |
|||
| |
|||
| [[User:M42kus|M42kus]] |
|||
| |
|||
| |
|||
|- |
|||
| [[FEM_CalculiX_Cantilever_3D|FEM CalculiX Cantilever 3D]] |
|||
| Finite Element Analysis |
|||
| Beginner |
|||
| 0:10 |
|||
| [[User:Bernd|Bernd]] |
|||
| 0.16.6377 or above |
|||
| |
|||
|- |
|||
| [[FEM_Shear_of_a_Composite_Block|FEM Shear of a Composite Block]] |
|||
| Finite Element Analysis |
|||
| Beginner/Intermediate |
|||
| 0:300 |
|||
| [[User:HarryvL|HarryvL]] |
|||
| 0.17.12960 or above |
|||
| |
|||
|- |
|||
| [[FEM_tutorial|FEM tutorial]] |
|||
| Finite Element Analysis |
|||
| Beginner |
|||
| 0:10 |
|||
| [[User:Drei|Drei]] |
|||
| 0.16.6700 or above |
|||
| |
|||
|- |
|||
| [[FEM_Tutorial_Python|FEM Tutorial Python]] |
|||
| Finite Element Analysis |
|||
| Intermediate |
|||
| 0:30 |
|||
| [[User:Bernd|Bernd]] |
|||
| 0.18.15985 or above |
|||
| |
|||
|- |
|||
| [[FreeCAD-Ship_s60_tutorial|FreeCAD-Ship s60 tutorial]] |
|||
| Ship Workbench |
|||
| Beginner |
|||
| |
|||
| |
|||
| |
|||
| |
|||
|- |
|||
| [[FreeCAD-Ship_s60_tutorial_(II)|FreeCAD-Ship s60 tutorial (II)]] |
|||
| Ship Workbench |
|||
| Beginner |
|||
| |
|||
| |
|||
| |
|||
| |
|||
|- |
|||
| [[How_to_install_additional_workbenches|How to install additional workbenches]] |
|||
| Programming |
|||
| Medium programmer |
|||
| 0:15 |
|||
| [[User:R-frank|r-frank]] |
|||
| Any |
|||
| None |
|||
|- |
|||
| [[How_to_install_macros|How to install macros]] |
|||
| Programming |
|||
| Medium programmer |
|||
| 0:15 |
|||
| [[User:Mario52|Mario52]] |
|||
| Any |
|||
| None |
|||
|- |
|||
| [[Import_from_STL_or_OBJ|Import from STL or OBJ]] |
|||
| Import from STL or OBJ |
|||
| Beginner |
|||
| 0:30 |
|||
| r-frank |
|||
| 1.0 |
|||
| 0.16.6703 |
|||
|- |
|||
| [[Import_OpenSCAD_code|Import OpenSCAD code]] |
|||
| Import OpenSCAD code |
|||
| Beginner |
|||
| 0:30 |
|||
| r-frank |
|||
| 0.16.6704 |
|||
| None |
|||
|- |
|||
| [[Import_text_and_geometry_from_Inkscape|Import text and geometry from Inkscape]] |
|||
| Import text and geometry from Inkscape |
|||
| Beginner |
|||
| 0:30 |
|||
| r-frank |
|||
| 0.16.6704 |
|||
| |
|||
|- |
|||
| [[Import/Export_IFC_-_compiling_IfcOpenShell|Import/Export IFC - compiling IfcOpenShell]] |
|||
| Arch Workbench |
|||
| Advanced |
|||
| 2:00 |
|||
| Pablo Gil |
|||
| |
|||
| |
|||
|- |
|||
| [[Measurement_Of_Angles_On_Holes|Measurement Of Angles On Holes]] |
|||
| TechDraw Workbench |
|||
| Beginner |
|||
| 0:01 |
|||
| AnHi |
|||
| 0.19 |
|||
| |
|||
|- |
|||
| [[PartDesign_Bearingholder_Tutorial_I|PartDesign Bearingholder Tutorial I]] |
|||
| Product design - Bearingholder #1 |
|||
| Beginner |
|||
| 60 minutes |
|||
| NormandC |
|||
| |
|||
| |
|||
|- |
|||
| [[PartDesign_Bearingholder_Tutorial_II|PartDesign Bearingholder Tutorial II]] |
|||
| Product design - Bearingholder #2 |
|||
| Beginner |
|||
| 60 minutes |
|||
| NormandC |
|||
| |
|||
| |
|||
|- |
|||
| [[PartDesign_tutorial|PartDesign tutorial]] |
|||
| Sketcher |
|||
| Beginner |
|||
| 0:15 |
|||
| [[User:Drei|Drei]] |
|||
| 0.16 or above |
|||
| |
|||
|- |
|||
| [[Path_Walkthrough_for_the_Impatient|Path Walkthrough for the Impatient]] |
|||
| Path Workbench |
|||
| |
|||
| |
|||
| Chrisb |
|||
| |
|||
| |
|||
|- |
|||
| [[Plot_Basic_tutorial|Plot Basic tutorial]] |
|||
| Plot Workbench Basic Tutorial |
|||
| Beginner |
|||
| |
|||
| |
|||
| |
|||
| |
|||
|- |
|||
| [[Plot_MultiAxes_tutorial|Plot MultiAxes tutorial]] |
|||
| Plot workbench |
|||
| Intermediate |
|||
| |
|||
| |
|||
| |
|||
| |
|||
|- |
|||
| [[Post-Processing_of_FEM_Results_with_Paraview|Post-Processing of FEM Results with Paraview]] |
|||
| Post-Processing of FEM Results with ParaView |
|||
| Intermediate |
|||
| 2:00 |
|||
| [[User:HarryvL|HarryvL]] |
|||
| 0.19 |
|||
| [https://forum.freecadweb.org/download/file.php?id=103403 Beam] and [https://forum.freecadweb.org/download/file.php?id=103557 wall] |
|||
|- |
|||
| [[Python_scripting_tutorial|Python scripting tutorial]] |
|||
| Programming |
|||
| Intermediate |
|||
| |
|||
| |
|||
| |
|||
| |
|||
|- |
|||
| [[Raytracing_tutorial|Raytracing tutorial]] |
|||
| Raytracing |
|||
| Beginner |
|||
| 0:010 |
|||
| [[User:Drei|Drei]] |
|||
| 0.16 or above |
|||
| |
|||
|- |
|||
| [[Robot_6-Axis|Robot 6-Axis]] |
|||
| Robot Workbench |
|||
| Intermediate |
|||
| |
|||
| |
|||
| |
|||
| |
|||
|- |
|||
| [[Robot_tutorial|Robot tutorial]] |
|||
| Robot Workbench |
|||
| Beginner |
|||
| |
|||
| r-frank |
|||
| |
|||
| |
|||
|- |
|||
| [[Scripted_Parts:_Ball_Bearing_-_Part_1|Scripted Parts: Ball Bearing - Part 1]] |
|||
| Part Scripting - Ball Bearing #1 |
|||
| Beginner |
|||
| 0:30 |
|||
| r-frank |
|||
| 0.16.6706 |
|||
| |
|||
|- |
|||
| [[Scripted_Parts:_Ball_Bearing_-_Part_2|Scripted Parts: Ball Bearing - Part 2]] |
|||
| Part Scripting - Ball Bearing #2 |
|||
| Beginner |
|||
| 0:30 |
|||
| r-frank |
|||
| 0.16.6706 |
|||
| |
|||
|- |
|||
| [[Scripts|Scripts]] |
|||
| Scripting |
|||
| Beginner |
|||
| |
|||
| onekk Carlo |
|||
| 0.19 |
|||
| |
|||
|- |
|||
| [[Sketcher_Micro_Tutorial_-_Constraint_Practices|Sketcher Micro Tutorial - Constraint Practices]] |
|||
| Sketcher |
|||
| Beginner |
|||
| 0:30 |
|||
| [[User:Quick61|Mark Stephen (Quick61)]] and vocx |
|||
| 0.19 |
|||
| [https://forum.freecadweb.org/viewtopic.php?f=36&p=371659#p371659 Sketcher Constraints practices] |
|||
|- |
|||
| [[Sketcher_reference|Sketcher reference]] |
|||
| |
|||
| |
|||
| |
|||
| |
|||
| |
|||
| |
|||
|- |
|||
| [[Sketcher_requirement_for_a_sketch|Sketcher requirement for a sketch]] |
|||
| Sketcher |
|||
| Beginner |
|||
| |
|||
| [[User:Maker|Maker]] |
|||
| |
|||
| None |
|||
|- |
|||
| [[Sketcher_Tutorial|Sketcher Tutorial]] |
|||
| Sketcher |
|||
| Beginner |
|||
| |
|||
| Ulrich |
|||
| |
|||
| |
|||
|- |
|||
| [[TechDraw_Pitch_Circle_Tutorial|TechDraw Pitch Circle Tutorial]] |
|||
| TechDraw Workbench |
|||
| Beginner |
|||
| 0:10 |
|||
| Andergrin |
|||
| 0.19 |
|||
| None |
|||
|- |
|||
| [[TechDraw_TemplateHowTo|TechDraw TemplateHowTo]] |
|||
| TechDraw Workbench |
|||
| Intermediate |
|||
| 1:00 |
|||
| wandererfan |
|||
| 0.17 |
|||
| None |
|||
|- |
|||
| [[Thread_for_Screw_Tutorial|Thread for Screw Tutorial]] |
|||
| Product design |
|||
| Advanced |
|||
| 1:00 |
|||
| [[User:DeepSOIC|DeepSOIC]], [[User:Murdic|Murdic]], vocx |
|||
| 0.19 |
|||
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=44668 Updated: Thread for screw tutorial] |
|||
|- |
|||
| [[Toothbrush_Head_Stand|Toothbrush Head Stand]] |
|||
| Modeling |
|||
| Beginner |
|||
| 1:00 |
|||
| [[User:EmmanuelG|EmmanuelG]] |
|||
| 0.16 or greater |
|||
| [https://www.thingiverse.com/thing:2403310 Thingiverse 2403310] |
|||
|- |
|||
| [[Topological_data_scripting|Topological data scripting]] |
|||
| Programming |
|||
| Intermediate |
|||
| |
|||
| |
|||
| |
|||
| |
|||
|- |
|||
| [[Transient_FEM_analysis|Transient FEM analysis]] |
|||
| Transient FEM analysis |
|||
| |
|||
| |
|||
| |
|||
| |
|||
| |
|||
|- |
|||
| [[Tutorial_custom_placing_of_windows_and_doors|Tutorial custom placing of windows and doors]] |
|||
| Architecture |
|||
| Intermediate |
|||
| 1:00 |
|||
| [[User:Vocx|Vocx]] |
|||
| 0.18 or above |
|||
| None |
|||
|- |
|||
| [[Tutorial_for_open_windows|Tutorial for open windows]] |
|||
| Architecture |
|||
| Beginner |
|||
| 1:00 |
|||
| [[User:Vocx|Vocx]] |
|||
| 0.18 or above |
|||
| None |
|||
|- |
|||
| [[Tutorial_FreeCAD_POV_ray|Tutorial FreeCAD POV ray]] |
|||
| Rendering |
|||
| Intermediate |
|||
| 2:00 |
|||
| [[User:Vocx|Vocx]] |
|||
| 0.18 or above |
|||
| None |
|||
|- |
|||
| [[Tutorial_Render_with_Blender|Tutorial Render with Blender]] |
|||
| Rendering |
|||
| Intermediate |
|||
| 1:00 |
|||
| [[User:Vocx|Vocx]] |
|||
| 0.18 or above |
|||
| None |
|||
|- |
|||
| [[VRML_Preparation_for_Robot_Simulation|VRML Preparation for Robot Simulation]] |
|||
| Robot Workbench |
|||
| Intermediate |
|||
| |
|||
| |
|||
| 0.11.4252ppa1 |
|||
| |
|||
|- |
|||
| [[Washers|Washers]] |
|||
| |
|||
| |
|||
| |
|||
| |
|||
| |
|||
| None |
|||
|- |
|||
| [[Whiffle_Ball_tutorial|Whiffle Ball tutorial]] |
|||
| Product design |
|||
| Beginner |
|||
| 0:30 |
|||
| r-frank and vocx |
|||
| 0.17 and above |
|||
| [https://github.com/FreeCAD/Examples/blob/master/Whiffle_Ball_Tutorial_ExampleFiles/WhiffleBall_Tutorial_FCWiki.FCStd?raw=true WhiffleBall_Tutorial_FCWiki.FCStd] |
|||
|- |
|||
| [[Wikihouse_porting_tutorial|Wikihouse porting tutorial]] |
|||
| Wikihouse porting tutorial |
|||
| Intermediate/Advanced |
|||
| 1:00 |
|||
| |
|||
| |
|||
| |
|||
|} |
|||
<div class="mw-translate-fuzzy"> |
|||
{{docnav|List of Commands|Interface Customization}} |
{{docnav|List of Commands|Interface Customization}} |
||
</div> |
|||
{{Userdocnavi{{#translation:}}}} |
|||
[[Category:Tutorials/ro]] |
|||
[[Category: |
[[Category:Tutorials{{#translation:}}]] |
Revision as of 14:52, 23 November 2021
Această pagină prezintă o selecție de tutoriale scrise de înaltă calitae. O listă completă și nesortată de tutoriale puteți găsi la : Category:Tutorials.
If you'd like to contribute with writing wiki documentation and tutorials, see the general wiki guidelines in WikiPages, and read the tutorial guidelines.
Please notice the version of FreeCAD used in the tutorial as some tutorials may use an old version of the program. Although the general modelling process may still work, some tools may have changed.
See also video tutorials.
Architectura și Construcții Civile și industriale
-
Arch tutorial
Basele medelării arhitecturale. -
Arch panel tutorial
Modelarea unui acoperiș în două ape la o casă mică. -
BIM modeling
Cum se face un model de casă mică și produce planul.
Modelarea Pieselor
FreeCAD furnizează două fluxuri de lucru la modelarea pieselor: combinarea obiectelor (o metodă numită constructive solid geometry (CSG)) utilizând Part workbench, sau utilizând metoda de editare feature cu Atelierul PartDesign PartDesign workbench. Vă rugăm să notați că PartDesign work flow s-a schimbat considerabil de la v0.17 încoace: unele dintre tutoriale trebuie updatate.
- combinarea obiectelor, o metodă numită geometrie solidă constructivă (CSG) utilizând Workbench part și
* folosind modelarea parametrică și editarea caracteristică cu PartDesign workbench.
Please note that the PartDesign Workbench workflow was considerably changed from FreeCAD 0.17 onward; some of the tutorials haven't been updated and may refer to the 0.16 version.
-
Creating a simple part with PartDesign
An intro to v0.17 PartDesign workflow -
Basic Part Design Tutorial 017
Model a simple part using a feature editing methodology (updated for version 0.17) -
Model a Toothbrush Head Stand
in PartDesign v0.16 -
Modeling for product design
Modeling a Lego block v0.16 -
Traditional modeling, the CSG way
Model a table using a simple CSG work flow. -
Draft ShapeString tutorial
Create engraved text on a solid. -
Create a Whiffle Ball
from Part primitives. -
Basic modeling tutorial
Create an iron angle in 2 simple methods.
The Raspberry Pi project has made simple tutorials that are easy to follow, particularly for those new to CAD systems:
- freecad-dice, model a die with six faces, and optionally 3D print it.
- freecad-headphone-tidy, model a spool to organize and store earphones, and optionally 3D print it.
- freecad-chess-set, model and entire chess set in Bauhaus modernist style.
- raspberrypilearning repository (CC-BY 4.0) with other examples.
Desen 2 D și Sketching
-
Draft tutorial
Introducerea în atelierul Desen 2 D( Draft workbench) . -
Basic Sketcher Tutorial
Introducere în Sketcher. -
Sketcher Micro Tutorial
Învățai să constrângeți eficient un pătrat.
Desenul Technic
-
Basic TechDraw Tutorial
Intro to creating drawings with the TechDraw workbench. -
Creating a new background template
Instructions to create a new page template in Inkscape for using with the TechDraw Workbench.
MEF
-
FEM tutorial
Introducerea în atelierul MEF (FEM workbench).
CNC & 3D Printing
-
Path Walkthrough for the Impatient
Prezentarea rapidă a Atelierului Traiectorie (Path module).
Randare
-
Creating renderings
With POV-Ray and LuxRender. -
Raytracing tutorial
Introduce fluxului de muncă a Atelierului de Randare(Raytracing workbench).
Robot workbench
Atelierul Robotică
-
Robot tutorial
simularea mișcării la Robot.
Scripting
These are tutorials that are related to scripting or programming. They are geared towards more experienced users, who are already somewhat familiar with the program.
Tutorials - Comprehensive list
Here are listed all the tutorials that are not in the manual regardless of their quality. If a tutorial is listed in the Category:Tutorials and not in this table please insert it.
Tutorial | Topic | Level | Time to complete hh:mm | Authors | FreeCAD version | Example files
| |
---|---|---|---|---|---|---|---|
Add Button to FEM Toolbar Tutorial | Finite Element Analysis | JohnWang | |||||
Add FEM Constraint Tutorial | Finite Element Analysis | M42kus | |||||
Add FEM Equation Tutorial | Finite Element Analysis | JohnWang |
| ||||
Aeroplane | Part Workbench | Beginner | 0:10 | Hughthecat | No | ||
Analysis of reinforced concrete with FEM | Reinforced concrete with FEM | Intermediate | 1:00 | HarryvL | 0.19 or above | ||
Arch panel tutorial | Modeling an architectural panel | Beginner | 1:00 | Yorik | |||
Arch tutorial | Modeling | Intermediate | Yorik | 0.14 | |||
Basic Attachment Tutorial | Sketch attachment | Beginner/intermediate | 01:00 | Bance | 0.17 and above | Basic Attachment Tutorial.FCStd | |
Basic modeling tutorial | Introduction to modelling | Beginner | 0:15 | NormandC | Any | None | |
Basic Part Design Tutorial | Modeling | Beginner | Mark Stephen (Quick61) and HarryGeier | 0.17 or above | Basic Part Design for v0.17 | ||
Basic Sketcher Tutorial | Sketcher | Beginner | 1:00 | Drei and Vocx | 0.19 | Basic Sketcher tutorial | |
Basic TechDraw Tutorial | TechDraw Workbench | Beginner | WandererFan | 0.17 and above | Basic Part Design for v0.17 Sample Basic TechDraw Tutorial Sample | ||
Code snippets | Python | Beginner | |||||
Creating a simple part with PartDesign | Modeling | Beginner | 1:00 | GlouGlou | 0.17 or above | Creating a simple PartDesign Body.FCStd | |
Customize Toolbars | Beginner | 0:05 | Mario52 | Any | None | ||
Draft ShapeString tutorial | Product Design | Beginner | 0:30 | r-frank and vocx | 0.17 and above | Draft_Shapestring_Text | |
Draft tutorial | Drafting | Beginner | 0:30 | Drei and vocx | 0.19 | Draft tutorial updated | |
Drawing Template HowTo (obsolete) | 2D Drafting | Intermediate | 1:00 | Mark Stephen (Quick61) | 0.14.3700 or above | None | |
Drawing tutorial (obsolete) | Blueprints / Drawings | Beginner | 0:15 | Drei | 0.16 or above | ||
Dxf Importer Install | Intermediate | 0:05 | Mario52 | Any | None | ||
Engine Block Tutorial | Part Workbench | Beginner | 1:00 | Andrewbuck40 | 0.14.3700 | ||
Export to STL or OBJ | Export to STL or OBJ | Beginner | 0:20 | r-frank | 0.16.6703 | ||
Extend FEM Module | Finite Element Analysis | M42kus | |||||
FEM CalculiX Cantilever 3D | Finite Element Analysis | Beginner | 0:10 | Bernd | 0.16.6377 or above | ||
FEM Shear of a Composite Block | Finite Element Analysis | Beginner/Intermediate | 0:300 | HarryvL | 0.17.12960 or above | ||
FEM tutorial | Finite Element Analysis | Beginner | 0:10 | Drei | 0.16.6700 or above | ||
FEM Tutorial Python | Finite Element Analysis | Intermediate | 0:30 | Bernd | 0.18.15985 or above | ||
FreeCAD-Ship s60 tutorial | Ship Workbench | Beginner | |||||
FreeCAD-Ship s60 tutorial (II) | Ship Workbench | Beginner | |||||
How to install additional workbenches | Programming | Medium programmer | 0:15 | r-frank | Any | None | |
How to install macros | Programming | Medium programmer | 0:15 | Mario52 | Any | None | |
Import from STL or OBJ | Import from STL or OBJ | Beginner | 0:30 | r-frank | 1.0 | 0.16.6703 | |
Import OpenSCAD code | Import OpenSCAD code | Beginner | 0:30 | r-frank | 0.16.6704 | None | |
Import text and geometry from Inkscape | Import text and geometry from Inkscape | Beginner | 0:30 | r-frank | 0.16.6704 | ||
Import/Export IFC - compiling IfcOpenShell | Arch Workbench | Advanced | 2:00 | Pablo Gil | |||
Measurement Of Angles On Holes | TechDraw Workbench | Beginner | 0:01 | AnHi | 0.19 | ||
PartDesign Bearingholder Tutorial I | Product design - Bearingholder #1 | Beginner | 60 minutes | NormandC | |||
PartDesign Bearingholder Tutorial II | Product design - Bearingholder #2 | Beginner | 60 minutes | NormandC | |||
PartDesign tutorial | Sketcher | Beginner | 0:15 | Drei | 0.16 or above | ||
Path Walkthrough for the Impatient | Path Workbench | Chrisb | |||||
Plot Basic tutorial | Plot Workbench Basic Tutorial | Beginner | |||||
Plot MultiAxes tutorial | Plot workbench | Intermediate | |||||
Post-Processing of FEM Results with Paraview | Post-Processing of FEM Results with ParaView | Intermediate | 2:00 | HarryvL | 0.19 | Beam and wall | |
Python scripting tutorial | Programming | Intermediate | |||||
Raytracing tutorial | Raytracing | Beginner | 0:010 | Drei | 0.16 or above | ||
Robot 6-Axis | Robot Workbench | Intermediate | |||||
Robot tutorial | Robot Workbench | Beginner | r-frank | ||||
Scripted Parts: Ball Bearing - Part 1 | Part Scripting - Ball Bearing #1 | Beginner | 0:30 | r-frank | 0.16.6706 | ||
Scripted Parts: Ball Bearing - Part 2 | Part Scripting - Ball Bearing #2 | Beginner | 0:30 | r-frank | 0.16.6706 | ||
Scripts | Scripting | Beginner | onekk Carlo | 0.19 | |||
Sketcher Micro Tutorial - Constraint Practices | Sketcher | Beginner | 0:30 | Mark Stephen (Quick61) and vocx | 0.19 | Sketcher Constraints practices | |
Sketcher reference | |||||||
Sketcher requirement for a sketch | Sketcher | Beginner | Maker | None | |||
Sketcher Tutorial | Sketcher | Beginner | Ulrich | ||||
TechDraw Pitch Circle Tutorial | TechDraw Workbench | Beginner | 0:10 | Andergrin | 0.19 | None | |
TechDraw TemplateHowTo | TechDraw Workbench | Intermediate | 1:00 | wandererfan | 0.17 | None | |
Thread for Screw Tutorial | Product design | Advanced | 1:00 | DeepSOIC, Murdic, vocx | 0.19 | Updated: Thread for screw tutorial | |
Toothbrush Head Stand | Modeling | Beginner | 1:00 | EmmanuelG | 0.16 or greater | Thingiverse 2403310 | |
Topological data scripting | Programming | Intermediate | |||||
Transient FEM analysis | Transient FEM analysis | ||||||
Tutorial custom placing of windows and doors | Architecture | Intermediate | 1:00 | Vocx | 0.18 or above | None | |
Tutorial for open windows | Architecture | Beginner | 1:00 | Vocx | 0.18 or above | None | |
Tutorial FreeCAD POV ray | Rendering | Intermediate | 2:00 | Vocx | 0.18 or above | None | |
Tutorial Render with Blender | Rendering | Intermediate | 1:00 | Vocx | 0.18 or above | None | |
VRML Preparation for Robot Simulation | Robot Workbench | Intermediate | 0.11.4252ppa1 | ||||
Washers | None | ||||||
Whiffle Ball tutorial | Product design | Beginner | 0:30 | r-frank and vocx | 0.17 and above | WhiffleBall_Tutorial_FCWiki.FCStd | |
Wikihouse porting tutorial | Wikihouse porting tutorial | Intermediate/Advanced | 1:00 |
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web
- Hubs: User hub, Power users hub, Developer hub