Tutorials/ro: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
 
(51 intermediate revisions by 3 users not shown)
Line 1: Line 1:
<languages/>
<languages/>

{{Docnav
|[[Frequently_asked_questions|FAQ]]
|[[Interface_Customization|Interface Customization]]
}}

{{TOCright}}

<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
Această pagină prezintă o selecție de tutoriale scrise de înaltă calitae. O listă completă și nesortată de tutoriale puteți găsi la : [[:Category:Tutorials]].
Această pagină prezintă o selecție de tutoriale scrise de înaltă calitae. O listă completă și nesortată de tutoriale puteți găsi la : [[:Category:Tutorials]].
vizitați [[Offsite tutorials]] și [[Video tutorials]] pentru lista tutorialelor găzduite pe site-uri externe. O sursă utilă de tutoriale video este,[https://YouTube.com YouTube].
</div>
</div>


<div class="mw-translate-fuzzy">
If you'd like to contribute with writing wiki documentation and tutorials, see the general wiki guidelines in [[WikiPages]],
If you'd like to contribute with writing wiki documentation and tutorials, see the general wiki guidelines in [[WikiPages]],
and read the [[tutorial guidelines]].
and read the [[tutorial guidelines]].
</div>


Please notice the version of FreeCAD used in the tutorial as some tutorials may use an old version of the program. Although the general modelling process may still work, some tools may have changed.
Please notice the version of FreeCAD used in the tutorial as some tutorials may use an old version of the program. Although the general modelling process may still work, some tools may have changed.


See also [[Video_tutorials|video tutorials]] and [[Books|books]].

<span id="Architecture_and_BIM"></span>
==Architectura și Construcții Civile și industriale==
==Architectura și Construcții Civile și industriale==


Line 21: Line 32:
</gallery>
</gallery>


<span id="Modeling_parts"></span>
<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
==Modelarea Pieselor==
==Modelarea Pieselor==
Line 26: Line 38:


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
FreeCAD furnizează două fluxuri de lucru la modelarea pieselor: combinarea obiectelor (o metodă numită [[wikipedia:Constructive solid geometry|constructive solid geometry (CSG)]]) utilizând [[Part Module|Part workbench]], sau utilizând metoda de editare [[Glossary#Feature|feature]] cu Atelierul PartDesign [[PartDesign Workbench|PartDesign workbench]]. Vă rugăm să notați că PartDesign work flow s-a schimbat considerabil de la v0.17 încoace: unele dintre tutoriale trebuie updatate.
FreeCAD furnizează două fluxuri de lucru la modelarea pieselor: combinarea obiectelor (o metodă numită [[wikipedia:Constructive solid geometry|constructive solid geometry (CSG)]]) utilizând [[Part_Workbench|Part workbench]], sau utilizând metoda de editare [[Glossary#Feature|feature]] cu Atelierul PartDesign [[PartDesign_Workbench|PartDesign workbench]]. Vă rugăm să notați că PartDesign work flow s-a schimbat considerabil de la v0.17 încoace: unele dintre tutoriale trebuie updatate.
* combinarea obiectelor, o metodă numită [https://en.wikipedia.org/wiki/Constructive_solid_geometry geometrie solidă constructivă (CSG)] utilizând [[Part Module | Workbench part]] și
* combinarea obiectelor, o metodă numită [https://en.wikipedia.org/wiki/Constructive_solid_geometry geometrie solidă constructivă (CSG)] utilizând [[Part_Workbench | Workbench part]] și
 * folosind modelarea parametrică și editarea [[Glosar # Caracteristică | caracteristică]] cu [[Workbench Workbench]].
 * folosind modelarea parametrică și editarea caracteristică cu [[PartDesign_Workbench | PartDesign workbench]].
</div>
</div>


Line 46: Line 58:
Tutorial-normand06.jpg|link=[[Basic modeling tutorial]]|[[Basic modeling tutorial]] <br/>Create an iron angle in 2 simple methods.
Tutorial-normand06.jpg|link=[[Basic modeling tutorial]]|[[Basic modeling tutorial]] <br/>Create an iron angle in 2 simple methods.
</div>
</div>

File:GGTuto1 Vue.PNG|link=[[Creating a simple part with Draft and Part WB]]|[[Creating_a_simple_part_with_Draft_and_Part_WB|Creating a simple part with Draft and Part Workbench]]<br/>An introduction to modeling solids with Draft Workbench by creating a 2d profile in draft.

File:GGTuto1 Vue.PNG|link=[[Creating a simple part with PartDesign]]|[[Creating_a_simple_part_with_PartDesign|Creating a simple part with PartDesign]] (v0.17)<br/>An introduction to the PartDesign workflow: tracing a sketch, using pad, pocket, and moving the object.
Pd_tut_final_solid.png|link=[[Basic_Part_Design_Tutorial]]|[[Basic_Part_Design_Tutorial|Basic Part Design Tutorial]] (v0.17)<br/>Model a simple part using a feature editing methodology: creating a sketch, using pad, external references, pocket, and mirror.
Pd_tut_final_solid.png|link=[[Basic_Part_Design_Tutorial_019]]|[[Basic_Part_Design_Tutorial_019|Basic Part Design Tutorial 019]] (v0.19 or above)<br/>An updated version of the previous tutorial that creates the same model using techniques that avoid the [[Topological_naming_problem|topological naming problem]].
TBHS-model.png|link=[[Toothbrush_Head_Stand]]|[[Toothbrush_Head_Stand|Model an electric toothbrush head stand]] (v0.16 or above)<br/>Multiple features used: sketch, distance and coincident constraints, pad, external references, fillet, chamfer, linear pattern, and draft.
Exercise lego 01.jpg|link=[[Manual:Modeling_for_product_design]]|[[Manual:Modeling_for_product_design|Modeling for product design]] (v0.16)<br/>Modeling a Lego block: sketches, vertical and horizontal distance constraints, pad, pocket, external reference, linear pattern, and assembly.
Exercise table complete.jpg|link=[[Manual:Traditional_modeling,_the_CSG_way]]|[[Manual:Traditional_modeling,_the_CSG_way|Traditional modeling, the CSG way]]<br/>Modeling a table by using simple solids like cubes and cylinders, and performing boolean operations (fusions and cuts) with them.
08_T04_Part_ShapesString_Extrude_final_cut.png|link=[[Draft_ShapeString_tutorial]]|[[Draft_ShapeString_tutorial|Draft ShapeString tutorial]] (v0.19)<br/>Create engraved text on a solid: extrude a shapestring to make it solid, then use a boolean cut to carve it from another solid.
10_T03_Part_ball_fillet.png|link=[[Whiffle_Ball_tutorial]]|[[Whiffle_Ball_tutorial|Create a wiffle ball]] (v0.19)<br/>Use solid primitives, like cubes and cylinders, and boolean operations, like union and cut, to create a hollowed ball.
Tutorial-normand06.jpg|link=[[Basic modeling tutorial]]|[[Basic_modeling_tutorial|Basic modeling tutorial]] <br/>Create an iron angle by two methods: using solid primitives, and boolean operations (CSG); and by extruding a planar profile.
File:HTCaeroplane04.png|link=[[Aeroplane]]|[[Aeroplane|Aeroplane tutorial]] <br/>Understand placements in FreeCAD by creating a simple aeroplane model. Then learn about rotation angles, yaw (Z), pitch (Y), and roll (X).
File:T13_14_Threads_components.png|link=[[Thread_for_Screw_Tutorial]]|[[Thread_for_Screw_Tutorial|Thread for screw tutorial]] (v0.19)<br/>Understand how to create threads with several techniques that include use of the tools [[Part_Helix|Part Helix]], [[PartDesign_AdditivePipe|PartDesign AdditivePipe]], [[Part_Sweep|Part Sweep]], [[Part_Fuse|Part Fuse]], and [[Part_Cut|Part Cut]].
</gallery>
</gallery>


Line 54: Line 80:
* [https://github.com/raspberrypilearning?utf8=%E2%9C%93&q=freecad&type=source&language= raspberrypilearning] repository (CC-BY 4.0) with other examples.
* [https://github.com/raspberrypilearning?utf8=%E2%9C%93&q=freecad&type=source&language= raspberrypilearning] repository (CC-BY 4.0) with other examples.


<span id="Drafting_and_Sketching"></span>
==Desen 2 D și Sketching ==
==Desen 2 D și Sketching ==


Line 60: Line 87:
Exercise cabin 01.jpg|link=[[Manual:Traditional 2D drafting]]|[[Manual:Traditional 2D drafting|Traditional 2D drafting]]
Exercise cabin 01.jpg|link=[[Manual:Traditional 2D drafting]]|[[Manual:Traditional 2D drafting|Traditional 2D drafting]]
Draft_tutorial_result.png|link=[[Draft tutorial]]|[[Draft tutorial]] <br/>Introducerea în atelierul Desen 2 D( Draft workbench) .
Draft_tutorial_result.png|link=[[Draft tutorial]]|[[Draft tutorial]] <br/>Introducerea în atelierul Desen 2 D( Draft workbench) .
Sketcher tutorial result.png|Link=[[Sketcher tutorial]]|[[Sketcher tutorial]] <br/>Introducere în Sketcher.
Sketcher tutorial result.png|Link=[[Basic_Sketcher_Tutorial/ro]]|[[Basic_Sketcher_Tutorial/ro|Basic Sketcher Tutorial]] <br/>Introducere în Sketcher.
Constrain3.png|link=[[Sketcher Micro Tutorial - Constraint Practices]]|[[Sketcher Micro Tutorial - Constraint Practices|Sketcher Micro Tutorial]] <br/> Învățai să constrângeți eficient un pătrat.
Constrain3.png|link=[[Sketcher Micro Tutorial - Constraint Practices]]|[[Sketcher Micro Tutorial - Constraint Practices|Sketcher Micro Tutorial]] <br/> Învățai să constrângeți eficient un pătrat.
</div>
</div>
</gallery>
</gallery>


<span id="Technical_Drawings"></span>
<gallery>

<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
==Desenul Technic==
==Desenul Technic==
Line 75: Line 101:
TDTut ProjGroup21.png|link=[[Basic TechDraw Tutorial]]|[[Basic TechDraw Tutorial|Basic TechDraw Tutorial]]<br/>Intro to creating drawings with the TechDraw workbench.
TDTut ProjGroup21.png|link=[[Basic TechDraw Tutorial]]|[[Basic TechDraw Tutorial|Basic TechDraw Tutorial]]<br/>Intro to creating drawings with the TechDraw workbench.
File:FCTemplateHow.png|link=[[TechDraw_TemplateHowTo]]|[[TechDraw_TemplateHowTo|Creating a new background template]]<br/>Instructions to create a new page template in Inkscape for using with the TechDraw Workbench.
File:FCTemplateHow.png|link=[[TechDraw_TemplateHowTo]]|[[TechDraw_TemplateHowTo|Creating a new background template]]<br/>Instructions to create a new page template in Inkscape for using with the TechDraw Workbench.
</div>
</div>
</gallery>
</gallery>


<span id="FEM"></span>
==MEF ==
==MEF ==


Line 86: Line 113:
FEM tutorial result.png|link=[[FEM tutorial]]|[[FEM tutorial]] <br/>Introducerea în atelierul MEF (FEM workbench).
FEM tutorial result.png|link=[[FEM tutorial]]|[[FEM tutorial]] <br/>Introducerea în atelierul MEF (FEM workbench).
</div>
</div>

FEM tutorial result.png|link=[[FEM tutorial]]|[[FEM tutorial|Simple FEM introduction]] (v0.20) <br/>This is a short introduction to the steps required to perform an analysis in the FEM Workbench: model your object, create a mesh, add constraints and forces, add a material, run the solver, and visualize the results.

Figure 11 Deformed Mesh.png|link=[[FEM Shear of a Composite Block]]|[[FEM Shear of a Composite Block|FEM shear analysis of a composite block]] (v0.17) <br/>Study the deformation of a block made of a hard nucleus surrounded by a softer material: create mesh regions, add materials, set up sliding constraints, add shear loads, run the solver, and visualize the results with a clip plane.

Femconcrete_Wall_3D_rx_PSS.png|link=[[Analysis_of_reinforced_concrete_with_FEM]]|[[Analysis_of_reinforced_concrete_with_FEM|Analysis of reinforced concrete with FEM]] (v0.19) <br/>Estimate the level of reinforcement required in a concrete structure to prevent brittle failure under tension or shear.

Two_balls_result_2-cropped.png|link=[[FEM_Example_Capacitance_Two_Balls]]|[[FEM_Example_Capacitance_Two_Balls|Electrostatic equation – Capacitance of two balls]] (v0.19)<br/>This example shows how to simulate a capacitance. It illustrates how to setup the example, study it's various parts, solve it using the [[FEM_SolverElmer|Elmer Solver]] and visualize the results using [[FEM_PostFilterClipRegion|Clip Filter]].

FEM_post-processing_Paraview.png|link=[[Post-Processing_of_FEM_Results_with_Paraview]]|[[Post-Processing_of_FEM_Results_with_Paraview|Post-Processing of FEM results with Paraview]] (v0.19)<br/>This tutorial explains the basics of transferring data from the FEM Workbench to Paraview and shows some of the options and settings for displaying data.
</gallery>
</gallery>


Line 97: Line 134:
</gallery>
</gallery>


<span id="Rendering"></span>
==Import și Export ==

<gallery mode=packed heights=200px style="font-size:1.1em">
<div class="mw-translate-fuzzy">
Dxf Importer Install 11.png|link=[[Dxf Importer Install]]|[[Dxf Importer Install]] <br/>Instalarea manuală a bibliotecii DXF import .
</div>
</gallery>

==Randare ==
==Randare ==


Line 114: Line 144:
</gallery>
</gallery>


==Robot workbench ==

<div class="mw-translate-fuzzy">
==Atelierul Robotică ==
==Atelierul Robotică ==
</div>


<gallery mode=packed heights=200px style="font-size:1.1em">
<gallery mode=packed heights=200px style="font-size:1.1em">
Line 122: Line 156:
</gallery>
</gallery>


== Plotting ==
== Scripting ==
<gallery mode=packed heights=200px style="font-size:1.1em">
Plot_Trigonometric_Example.png|link=[[Plot Basic tutorial]]|[[Plot Basic tutorial|Basic plot]] <br/>Draw simple mathematical functions in the Plot Workbench using the underlying Python plotting libraries: define the input list (X), two output lists (Y1, Y2), plot the functions (Y1 and Y2 against X), set the grid, line styles, legends, axes labels, plot title, and save the plot.
Plot_MultiAxes_Example.png|link=[[Plot MultiAxes tutorial]]|[[Plot MultiAxes tutorial|Multiaxes plot]] <br/>Draw a more complicated plot in the Plot Workbench with two different input lists (X, T), and three output lists (Y1, Y2, Y3), then create two sets of axes in the same plot, and plot the pairs of lists (Y1 against X, and Y2 and Y3 against T); set the axes labels and grid, and move the legends and title.
</gallery>


These are tutorials that are related to scripting or programming. They are geared towards more experienced users, who are already somewhat familiar with the program.
== Drawings ==
* [[Python_scripting_tutorial|Python scripting tutorial]]
{{VeryImportantMessage|Development of the [[Drawing Workbench]] a fost oprit în FreeCAD 0.16. Luați în considerare utilizare [[TechDraw Workbench]] instead.}}
* [[How_to_install_macros|How to install macros]]
<gallery mode=packed heights=200px style="font-size:1.1em">
* [[How_to_install_additional_workbenches|How to install additional workbenches]]
<div class="mw-translate-fuzzy">
Drawing_tutorial_result.png|link=[[Drawing tutorial]]|[[Drawing tutorial]] <br/>Intro to creating blueprints with the Drawing workbench.
Exercise drawing 01.jpg|link=[[Manual:Generating 2D drawings]]|[[Manual:Generating 2D drawings|Generating 2D drawings]]
</div>
</gallery>


== Tutorials - Comprehensive list ==
== Tutorials - Comprehensive list ==

Here are listed all the tutorials that are not in the manual '''regardless of their quality'''. If a tutorial is listed in the [[:Category:Tutorials]] and not in this table pleas insert it.
Here are listed all the tutorials that are not in the manual '''regardless of their quality'''. If a tutorial is listed in the [[:Category:Tutorials]] and not in this table please insert it.


{| class="wikitable sortable"
{| class="wikitable sortable"
Line 149: Line 176:
! FreeCAD version
! FreeCAD version
! Example files
! Example files
! UnfinishedDocu


<!-- Template for new entries
<!-- Template for new entries
|-
|-
| [[Tutorial]]
| [[Tutorial|Tutorial]]
| Topic
| Topic
| Level
| Level
| 0:00
| 0:00
| [[User:Name | Name]]
| [[User:Name|Name]]
| 1.0
| 1.0
| None
| None
| No
-->
-->


|-
|-
| [[Add FEM Constraint Tutorial]]
| [[Add_Button_to_FEM_Toolbar_Tutorial|Add Button to FEM Toolbar Tutorial]]
| Finite Element Analysis
|
|
|
|
|
| [[User:M42kus | M42kus]]
| [[User:JohnWang|JohnWang]]
|
|
|
|
| No


|-
|-
| [[Add FEM Equation Tutorial]]
| [[Add_FEM_Constraint_Tutorial|Add FEM Constraint Tutorial]]
| Finite Element Analysis
|
|
| [[User:M42kus|M42kus]]
|
|

|-
| [[Add_FEM_Equation_Tutorial|Add FEM Equation Tutorial]]
| Finite Element Analysis
|
|
| [[User:JohnWang|JohnWang]]
|
|

|-
| [[Adding_a_new_mouse_navigation_option_to_FreeCAD|Adding a new mouse navigation option to FreeCAD (unfinished)]]
| Programming
| Advanced
|
|
| [[User:Kunda1|Kunda1]]
| 0.19.x
| None

|-
| [[Advanced_Attachment_OYX|Advanced Attachment OYX]]
| Attachment
| Intermediate/Advanced
|
|
| [[User:drmacro|drmacro]]
| 0.19
| None

|-
| [[Advanced_TechDraw_Tutorial|Advanced TechDraw Tutorial (unfinished)]]
| TechDraw Workbench
| Advanced
|
|
| [[User:M42kus | M42kus]]
| [[User:domad|domad]]
|
| 0.19
|
| None
| No


<div class="mw-translate-fuzzy">
|-
|-
| [[Aeroplane]]
| [[Aeroplane/ro|Aeroplane]]
| Part Workbench
| Part Workbench
| Beginner
| Beginner
Line 192: Line 252:
|
|
| No
| No
</div>


|-
|-
| [[Analysis of reinforced concrete with FEM]]
| [[Analysis_of_reinforced_concrete_with_FEM|Analysis of reinforced concrete with FEM]]
| Finite Element Analysis
| Reinforced concrete with FEM
| Intermediate
| Intermediate
| 1:00
| 1:00
| [[User:HarryvL | HarryvL]]
| [[User:HarryvL|HarryvL]]
| 0.19 or above
| 0.19 or above
|
|
| No


|-
|-
| [[Arch panel tutorial]]
| [[Arch_panel_tutorial|Arch panel tutorial]]
| Arch Workbench
| Modeling an architectural panel
| Beginner
| Beginner
| 1:00
| 1:00
| Yorik
| Yorik
|
|
|
|
| No


|-
|-
| [[Arch tutorial]]
| [[Arch_tutorial|Arch tutorial]]
| Modeling
| Modeling
| Intermediate
| Intermediate
|
|
| [[User:Yorik | Yorik]]
| [[User:Yorik|Yorik]]
| 0.14
| 0.14
|
|

| No
|-
| [[Basic_Attachment_Tutorial|Basic Attachment Tutorial]]
| Attachment
| Beginner/intermediate
| 1:00
| [[User:Bance|Bance]]
| 0.17 or above
| [https://github.com/BanceFC/Examples/blob/master/Basic_Attachment_Tutorial.FCStd Basic Attachment Tutorial.FCStd]


|-
|-
| [[Basic modeling tutorial]]
| [[Basic_modeling_tutorial|Basic modeling tutorial]]
| Modelling
| Introduction to modelling
| Beginner
| Beginner
| 0:15
| 0:15
| [[User:NormandC | NormandC]]
| [[User:NormandC|NormandC]]
| Any
| Any
| None
| None
| No


|-
|-
| [[Basic Part Design Tutorial | Basic Part Design Tutorial (0.16 and below)]]
| [[Basic_Part_Design_Tutorial|Basic Part Design Tutorial]]
| Modeling
| Modeling
| Beginner
| Beginner
|
|
| [[User:Quick61 | Mark Stephen (Quick61)]]
| [[User:Quick61|Mark Stephen (Quick61)]] and [[User:HarryGeier|HarryGeier]]
| 0.14.3700 to 0.16
| 0.17 or above
| [https://github.com/FreeCAD/Examples/blob/master/Basic_Part_Design_Tutorial_Example_017_Files/Basic_Part_Design_Tutorial_017.fcstd Basic Part Design for v0.17]
| None
| No


|-
|-
| [[Basic_Part_Design_Tutorial_017 | Basic Part Design Tutorial (0.17 and above)]]
| [[Basic_Part_Design_Tutorial_019|Basic Part Design Tutorial 019]]
| Modeling
| Modeling
| Beginner
| Beginner
|
| 1:00
| [[User:Onekk|Carlo Dormeletti]] and [[User:Edwilliams16|Ed Williams]]
| [[User:HarryGeier | HarryGeier]]
| 0.17 or above
| 0.19 or above
|
| [https://github.com/FreeCAD/Examples/blob/master/Basic_Part_Design_Tutorial_Example_017_Files/Basic_Part_Design_Tutorial_017.fcstd Basic Part Design for v0.17]
| No


|-
|-
| [[Basic Sketcher Tutorial]]
| [[Basic_Sketcher_Tutorial|Basic Sketcher Tutorial]]
| Sketcher
| Sketcher Workbench
| Beginner
| Beginner
| 1:00
| 1:00
| [[User:Drei | Drei]] and [[User:Vocx | Vocx]]
| [[User:Drei|Drei]] and [[User:Vocx|Vocx]]
| 0.19
| 0.19
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=43594 Basic Sketcher tutorial ]
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=43594 Basic Sketcher tutorial ]
| No


|-
|-
| [[Basic TechDraw Tutorial]]
| [[Basic_TechDraw_Tutorial|Basic TechDraw Tutorial]]
| TechDraw Workbench
| Modeling
| Beginner
| Beginner
|
|
| [[User:WandererFan | WandererFan]]
| [[User:WandererFan|WandererFan]]
| 0.17 and above
| 0.17 or above
| [https://github.com/FreeCAD/Examples/blob/master/Basic_Part_Design_Tutorial_Example_017_Files/Basic_Part_Design_Tutorial_017.fcstd Basic Part Design for v0.17 Sample] [https://github.com/FreeCAD/Examples/blob/master/Basic_TechDraw_Tutorial_Example_Files/Basic_TechDraw_Tutorial.fcstd Basic TechDraw Tutorial Sample]
| [https://github.com/FreeCAD/Examples/blob/master/Basic_Part_Design_Tutorial_Example_017_Files/Basic_Part_Design_Tutorial_017.fcstd Basic Part Design for v0.17 Sample] [https://github.com/FreeCAD/Examples/blob/master/Basic_TechDraw_Tutorial_Example_Files/Basic_TechDraw_Tutorial.fcstd Basic TechDraw Tutorial Sample]
| No


|-
|-
| [[BIM_ingame_tutorial|BIM ingame tutorial]]
| [[Code snippets]]
| Arch Workbench
| Beginner
|
| [[User:Yorik|Yorik]]
|
|

|-
| [[CAM_Walkthrough_for_the_Impatient|CAM Walkthrough for the Impatient]]
| CAM Workbench
|
|
| Chrisb
|
|

|-
| [[Code_snippets|Code snippets]]
| Python
| Python
| Beginner
| Beginner
|
|
|
|
|
|
|
|

| No
|-
| [[Creating_a_simple_part_with_Draft_and_Part_WB|Creating a simple part with Draft and Part WB]]
| Modeling
| Beginner
| 1:30
| Heda
| -
| -

|-
| [[Creating_a_simple_part_with_Part_WB|Creating a simple part with Part WB]]
| Modeling
| Beginner
| 2:00
| Heda
| -
| -


|-
|-
| [[Creating a simple part with PartDesign]]
| [[Creating_a_simple_part_with_PartDesign|Creating a simple part with PartDesign]]
| Modeling
| Modeling
| Beginner
| Beginner
Line 291: Line 388:
| 0.17 or above
| 0.17 or above
| [https://github.com/FreeCAD/Examples/blob/master/Creating_a_simple_PartDesign_Body.FCStd Creating a simple PartDesign Body.FCStd]
| [https://github.com/FreeCAD/Examples/blob/master/Creating_a_simple_PartDesign_Body.FCStd Creating a simple PartDesign Body.FCStd]
| No


|-
|-
| [[Customize Toolbars]]
| [[Customize_Toolbars|Customize Toolbars]]
| Customization
|
| Beginner
| Beginner
| 0:05
| 0:05
| [[User:Mario52 | Mario52]]
| [[User:Mario52|Mario52]]
| Any
| Any
| None
| None
| No


|-
|-
| [[Draft ShapeString tutorial]]
| [[Draft_ShapeString_tutorial|Draft ShapeString tutorial]]
| Product Design
| Product Design
| Beginner
| Beginner
| 0:30
| 0:30
| r-frank and vocx
| r-frank and vocx
| 0.17 and above
| 0.17 or above
| [https://github.com/FreeCAD/Examples/blob/master/Draft_Shapestring_Tutorial_Examples/Draft_Shapestring_Tutorial_Text.FCStd?raw=true Draft_Shapestring_Text]
| [https://github.com/FreeCAD/Examples/blob/master/Draft_Shapestring_Tutorial_Examples/Draft_Shapestring_Tutorial_Text.FCStd?raw=true Draft_Shapestring_Text]
| No


|-
|-
| [[Draft tutorial]]
| [[Draft_tutorial|Draft tutorial]]
| Draft Workbench
| Drafting
| Beginner
| Beginner
| 0:30
| 0:30
| [[User:Drei | Drei]] and vocx
| [[User:Drei|Drei]] and vocx
| 0.19
| 0.19
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=43651 Draft tutorial updated]
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=43651 Draft tutorial updated]
| No


|-
|-
| [[Engine_Block_Tutorial|Engine Block Tutorial]]
| [[Draft tutorial Outdated]]
| Part Workbench
| Drafting
| Beginner
| Beginner
| 1:00
| Andrewbuck40
| 0.14.3700
|

|-
| [[Example_Combined_Footing|Example Combined Footing]]
| Reinforcement Workbench
| Intermediate
|
|
| [[User:Shiv_Charan|Shiv Charan]]
| 0.20
| None

|-
| [[Example_Slab_Having_LShape_Rebars_Reinforcement_Mesh|Example Slab Having LShape Rebars Reinforcement Mesh]]
| Reinforcement Workbench
| Intermediate
|
|
| [[User:Shiv_Charan|Shiv Charan]]
|
|
| 0.20
|
| None


|-
|-
| [[Example_Slab_Having_Mesh_Of_Straight_Rebars|Example Slab Having Mesh Of Straight Rebars]]
| [[Drawing Template HowTo]]
| Reinforcement Workbench
| 2D Drafting
| Intermediate
| Intermediate
| 1:00
|
| [[User:Quick61 | Mark Stephen (Quick61)]]
| [[User:Shiv_Charan|Shiv Charan]]
| 0.20
| 0.14.3700 or greater or above
| None
| None
| No


|-
|-
| [[Example_Slab_Having_UShape_Rebars_Reinforcement_Mesh|Example Slab Having UShape Rebars Reinforcement Mesh]]
| [[Drawing tutorial | Drawing tutorial (obsolete)]]
| Reinforcement Workbench
| Blueprints / Drawings
| Intermediate
| Beginner
| 0:15
| [[User:Drei | Drei]]
| 0.16 or above
|
|
| [[User:Shiv_Charan|Shiv Charan]]
| No
| 0.20
| None


|-
|-
| [[Example_Slab_Spanning_in_One_Direction|Example Slab Spanning in One Direction]]
| [[Dxf Importer Install]]
| Reinforcement Workbench
| Topic
| Intermediate
| Intermediate
| 0:05
|
| [[User:Mario52 | Mario52]]
| [[User:Shiv_Charan|Shiv Charan]]
| Any
| 0.20
| None
| None
| No


|-
|-
| [[Example_Slab_Spanning_in_Two_Directions|Example Slab Spanning in Two Directions]]
| [[Engine Block Tutorial]]
| Part Workbench
| Reinforcement Workbench
| Intermediate
| Beginner
| 1:00
| Andrewbuck40
| 0.14.3700
|
|
| [[User:Shiv_Charan|Shiv Charan]]
| Yes
| 0.20
| None


|-
|-
| [[Export to STL or OBJ]]
| [[Export_to_STL_or_OBJ|Export to STL or OBJ]]
| Export to STL or OBJ
| Export
| Beginner
| Beginner
| 0:20
| 0:20
| r-frank
| r-frank
| 0.16.6703
| 0.16.6703
|
|
| No


|-
|-
| [[Extend FEM Module]]
| [[Extend_FEM_Module|Extend FEM Module]]
| Finite Element Analysis
|
|
|
|
|
| [[User:M42kus | M42kus]]
| [[User:M42kus|M42kus]]
|
|
|
|
| No


|-
|-
| [[FEM_CalculiX_Cantilever_3D|FEM CalculiX Cantilever 3D]]
| [[FEM Beginner tutorial]]
| Finite Element Analysis
| FEM Beginner tutorial
| Beginner
| Beginner
|
| 0:10
| [[User:Bernd|Bernd]]
| thschrader
| 0.17.11622+
| 0.16.6377 or above
|
| [https://github.com/FreeCAD/Examples/blob/master/Whiffle_Ball_Tutorial_ExampleFiles/WhiffleBall_Tutorial_FCWiki.FCStd?raw=true Whiffle Ball]
| Yes


|-
|-
| [[FEM_Example_Capacitance_Two_Balls|FEM Example Capacitance Two Balls]]
| [[FEM CalculiX Cantilever 3D]]
| Finite Element Analysis
| Finite Element Analysis
| Beginner
| Beginner
| 0:10
| [[User:Bernd | Bernd]]
| 0.16.6377 or above
|
|
| [[User:Sudhanshu Dubey|Sudhanshu Dubey]]
| No
| 0.19
| None


|-
|-
| [[FEM Shear of a Composite Block]]
| [[FEM_Shear_of_a_Composite_Block|FEM Shear of a Composite Block]]
| Finite Element Analysis
| Finite Element Analysis
| Beginner/Intermediate
| Beginner/Intermediate
| 0:300
| 0:30
| [[User:HarryvL | HarryvL]]
| [[User:HarryvL|HarryvL]]
| 0.17.12960 or above
| 0.17.12960 or above
|
|
| No


|-
|-
| [[FEM tutorial]]
| [[FEM_tutorial|FEM tutorial]]
| Finite Element Analysis
| Finite Element Analysis
| Beginner
| Beginner
| 0:10
| 0:10
| [[User:Drei | Drei]]
| [[User:Drei|Drei]]
| 0.16.6700 or above
| 0.17 or above
|
|
| No


|-
|-
| [[FEM Tutorial Python]]
| [[FEM_Tutorial_Python|FEM Tutorial Python]]
| Finite Element Analysis
| Finite Element Analysis
| Intermediate
| Intermediate
| 0:30
| 0:30
| [[User:Bernd | Bernd]]
| [[User:Bernd|Bernd]]
| 0.18.15985 or above
| 0.18.15985 or above
|
|
| No


|-
|-
| [[FreeCAD-Ship s60 tutorial]]
| [[FreeCAD-Ship_s60_tutorial|FreeCAD-Ship s60 tutorial]]
| Ship Workbench
| Ship Workbench
| Beginner
| Beginner
|
|
|
|
|
|
|
|
| No


|-
|-
| [[FreeCAD-Ship s60 tutorial (II)]]
| [[FreeCAD-Ship_s60_tutorial_(II)|FreeCAD-Ship s60 tutorial (II)]]
| Ship Workbench
| Ship Workbench
| Beginner
| Beginner
|
|
|
|
|
|
|
|
| No


|-
|-
| [[How to install additional workbenches]]
| [[How_to_install_additional_workbenches|How to install additional workbenches]]
| Programming
| Programming
| Medium programmer
| Medium programmer
| 0:15
| 0:15
| [[User:R-frank | r-frank]]
| [[User:R-frank|r-frank]]
| Any
| Any
| None
| None
| No


|-
|-
| [[How to install macros]]
| [[How_to_install_macros|How to install macros]]
| Programming
| Programming
| Medium programmer
| Medium programmer
| 0:15
| 0:15
| [[User:Mario52 | Mario52]]
| [[User:Mario52|Mario52]]
| Any
| Any
| None
| None
| No


|-
|-
| [[Import from STL or OBJ]]
| [[Import_from_STL_or_OBJ|Import from STL or OBJ]]
| Import from STL or OBJ
| Import
| Beginner
| Beginner
| 0:30
| 0:30
| r-frank
| r-frank
| 1.0
| 0.16.6703
|
| 0.16.6703
| No


|-
|-
| [[Import OpenSCAD code]]
| [[Import_OpenSCAD_code|Import OpenSCAD code]]
| Import OpenSCAD code
| Import
| Beginner
| Beginner
| 0:30
| 0:30
| r-frank
| r-frank
| 0.16.6704
| 0.16.6704
| None
| None
| No


|-
|-
| [[Import text and geometry from Inkscape]]
| [[Import_text_and_geometry_from_Inkscape|Import text and geometry from Inkscape]]
| Import
| Import text and geometry from Inkscape
| Beginner
| Beginner
| 0:30
| 0:30
| r-frank
| r-frank
| 0.16.6704
| 0.16.6704
|
|
| No


|-
|-
| [[Import/Export IFC - compiling IfcOpenShell]]
| [[Import/Export_IFC_-_compiling_IfcOpenShell|Import/Export IFC - compiling IfcOpenShell]]
| Arch Workbench
| Arch Workbench
| Advanced
| Advanced
| 2:00
| 2:00
| Pablo Gil
| Pablo Gil
|
|
|
|
| No


|-
|-
| [[Measurement_Of_Angles_On_Holes|Measurement Of Angles On Holes]]
| [[PartDesign tutorial]]
| TechDraw Workbench
| Sketcher
| Beginner
| Beginner
| 0:15
| 0:01
| AnHi
| [[User:Drei | Drei]]
| 0.16 or above
| 0.19
|
|
| No


|-
|-
| [[PartDesign_Bearingholder_Tutorial_I|PartDesign Bearingholder Tutorial I]]
| [[Path Core Concepts]]
| Product design
| Path Workbench
| Beginner
|
|
| 1:00
| NormandC
|
|
|
|
|
| Yes


|-
|-
| [[PartDesign_Bearingholder_Tutorial_II|PartDesign Bearingholder Tutorial II]]
| [[Path Customization]]
| Product design
| Path Workbench
| Beginner
| 1:00
| NormandC
|
|
|
|
|
|
|
| Yes


|-
|-
| [[PartDesign_tutorial|PartDesign tutorial]]
| [[Path Postprocessor Customization]]
| Path Workbench
| Sketcher Workbench
| Beginner
|
|
| 0:15
| [[User:Drei|Drei]]
| chrisb
| 0.16 or above
|
|
|
| No


|-
|-
| [[Plot_Basic_tutorial|Plot Basic tutorial]]
| [[Path scripting]]
| Path Workbench
| Plot Workbench
| Beginner
| Intermediate
|
|
|
|
|
|
|
|
| No


|-
|-
| [[Plot_MultiAxes_tutorial|Plot MultiAxes tutorial]]
| [[Path Walkthrough for the Impatient]]
| Plot workbench
| Path Workbench
| Intermediate
|
|
|
|
| Chrisb
|
|
|
|
| Yes


|-
|-
| [[Post-Processing_of_FEM_Results_with_Paraview|Post-Processing of FEM Results with Paraview]]
| [[Plot Basic tutorial]]
| Finite Element Analysis
| Plot Workbench Basic Tutorial
| Intermediate
| Beginner
|
|
|
|
| No

|-
| [[Plot MultiAxes tutorial]]
| Plot workbench
| Intermediate
|
|
|
|
| No

|-
| [[Post-Processing of FEM Results with Paraview]]
| Post-Processing of FEM Results with ParaView
| Intermediate
| 2:00
| 2:00
| [[User:HarryvL | HarryvL]]
| [[User:HarryvL|HarryvL]]
| 0.19
| 0.19
| [https://forum.freecadweb.org/download/file.php?id=103403 [https://forum.freecadweb.org/download/file.php?id=103557 Beam]] and wall
| [https://forum.freecadweb.org/download/file.php?id=103403 Beam] and [https://forum.freecadweb.org/download/file.php?id=103557 wall]
| No


|-
|-
| [[Private_Preference_Packs|Private Preference Packs]]
| [[Python scripting tutorial]]
| Customization
| Programming
| Intermediate
| Intermediate/Advanced
|
|
| [[User:Drmacro|drmacro]]
| 1.0 or above
|
|
|
|
| No


|-
|-
| [[Raytracing tutorial]]
| [[Python_scripting_tutorial|Python scripting tutorial]]
| Programming
| Raytracing
| Intermediate
|
|
|
|

|-
| [[Raytracing_tutorial|Raytracing tutorial]]
| Raytracing Workbench
| Beginner
| Beginner
| 0:010
| 0:10
| [[User:Drei | Drei]]
| [[User:Drei|Drei]]
| 0.16 or above
| 0.16 or above
|
|
| No


|-
|-
| [[Robot 6-Axis]]
| [[Robot_6-Axis|Robot 6-Axis]]
| Robot Workbench
| Robot Workbench
| Intermediate
| Intermediate
|
|
|
|
|
|
|
|
| No


|-
|-
| [[Robot tutorial]]
| [[Robot_tutorial|Robot tutorial]]
| Robot Workbench
| Robot Workbench
| Beginner
| Beginner
|
|
| r-frank
| r-frank
|
|
|
|
| No


|-
|-
| [[Scripted Parts: Ball Bearing - Part 1]]
| [[Scripted_Parts:_Ball_Bearing_-_Part_1|Scripted Parts: Ball Bearing - Part 1]]
| Python
| Part Scripting - Ball Bearing #1
| Beginner
| Beginner
| 0:30
| 0:30
| r-frank
| r-frank
| 0.16.6706
| 0.16.6706
|
|
| No


|-
|-
| [[Scripted Parts: Ball Bearing - Part 2]]
| [[Scripted_Parts:_Ball_Bearing_-_Part_2|Scripted Parts: Ball Bearing - Part 2]]
| Python
| Part Scripting - Ball Bearing #2
| Beginner
| Beginner
| 0:30
| 0:30
| r-frank
| r-frank
| 0.16.6706
| 0.16.6706
|
|
| No


|-
|-
| [[Scripts]]
| [[Scripts|Scripts]]
| Python
| Scripting
| Beginner
| Beginner
|
|
| onekk Carlo
| onekk Carlo
| 0.19
| 0.19
|
|
| No

|-
| [[Simple Box Cover]]
| Modeling
| Beginner
| 0:20
| Normand C
| 0.14.3700
|
| Yes


|-
|-
| [[Sketcher Micro Tutorial - Constraint Practices]]
| [[Sketcher_Micro_Tutorial_-_Constraint_Practices|Sketcher Micro Tutorial - Constraint Practices]]
| Sketcher
| Sketcher Workbench
| Beginner
| Beginner
| 0:30
| 0:30
| Mark Stephen (Quick61) and vocx
| [[User:Quick61|Mark Stephen (Quick61)]] and vocx
| 0.19
| 0.19
| [https://forum.freecadweb.org/viewtopic.php?f=36&p=371659#p371659 Sketcher Constraints practices]
| [https://forum.freecadweb.org/viewtopic.php?f=36&p=371659#p371659 Sketcher Constraints practices]
| No


|-
|-
| [[Sketcher reference]]
| [[Sketcher_reference|Sketcher reference]]
| Sketcher Workbench
|
|
|
|
|
|
|
|
|
|
|
| No


|-
|-
| [[Sketcher requirement for a sketch]]
| [[Sketcher_requirement_for_a_sketch|Sketcher requirement for a sketch]]
| Sketcher Workbench
| Sketch
| Beginner
| Beginner
|
|
| [[User:Maker | Maker]]
| [[User:Maker|Maker]]
|
|
| None
| None
| No


|-
|-
| [[Sketcher Tutorial]]
| [[Sketcher_Tutorial|Sketcher Tutorial]]
| Sketcher
| Sketcher Workbench
| Beginner
| Beginner
|
| Ulrich
|
|

|-
| [[TechDraw_HowTo_Page|TechDraw HowTo Page]]
| TechDraw Workbench
|
|
| Ulrich
|
|
|
|
| No
| 0.19
| None


|-
|-
| [[TechDraw TemplateHowTo]]
| [[TechDraw_Pitch_Circle_Tutorial|TechDraw Pitch Circle Tutorial]]
| TechDraw Workbench
| Drafting
| Beginner
| Intermediate
| 0:10
| Andergrin
| 0.19
| None

|-
| [[TechDraw_TemplateGenerator|TechDraw TemplateGenerator]]
| TechDraw Workbench
| Intermediate
|
| [[User:FBXL5|FBXL5]]
| 0.19
| None

|-
| [[TechDraw_TemplateHowTo|TechDraw TemplateHowTo]]
| TechDraw Workbench
| Intermediate
| 1:00
| 1:00
| wandererfan
| wandererfan
| 0.17
| 0.17
| None
| None
| No


|-
|-
| [[Thread for Screw Tutorial]]
| [[Thread_for_Screw_Tutorial|Thread for Screw Tutorial]]
| Product design
| Product design
| Advanced
| Advanced
| 1:00
| 1:00
| [[User:DeepSOIC | DeepSOIC]], [[User:Murdic | Murdic]], vocx
| [[User:DeepSOIC|DeepSOIC]], [[User:Murdic|Murdic]], vocx
| 0.19
| 0.19
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=44668 Updated: Thread for screw tutorial]
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=44668 Updated: Thread for screw tutorial]
| No


|-
|-
| [[Toothbrush Head Stand]]
| [[Toothbrush_Head_Stand|Toothbrush Head Stand]]
| Modeling
| Modeling
| Beginner
| Beginner
| 1:00
| 1:00
| [[User:EmmanuelG | EmmanuelG]]
| [[User:EmmanuelG|EmmanuelG]]
| 0.16 or greater
| 0.16 or above
| [https://www.thingiverse.com/thing:2403310 Thingiverse 2403310]
| [https://www.thingiverse.com/thing:2403310 Thingiverse 2403310]
| No


|-
|-
| [[Topological data scripting]]
| [[Topological_data_scripting|Topological data scripting]]
| Programming
| Programming
| Intermediate
| Intermediate
|
|
|
|
|
|
|
|
| No


|-
|-
| [[Transient FEM analysis]]
| [[Transient_FEM_analysis|Transient FEM analysis]]
| Finite Element Analysis
| Transient FEM analysis
|
|
|
|
|
|
|
|
|
|
| Yes


|-
|-
| [[Tutorial custom placing of windows and doors]]
| [[Tutorial_custom_placing_of_windows_and_doors|Tutorial custom placing of windows and doors]]
| Arch Workbench
| Architecture
| Intermediate
| Intermediate
| 1:00
| 1:00
| [[User:Vocx | Vocx]]
| [[User:Vocx|Vocx]]
| 0.18 or above
| 0.18 or above
| None
| None
| No


|-
|-
| [[Tutorial for open windows]]
| [[Tutorial_for_open_windows|Tutorial for open windows]]
| Arch Workbench
| Architecture
| Beginner
| Beginner
| 1:00
| 1:00
| [[User:Vocx | Vocx]]
| [[User:Vocx|Vocx]]
| 0.18 or above
| 0.18 or above
| None
| None
| No


|-
|-
| [[Tutorial FreeCAD POV ray]]
| [[Tutorial_FreeCAD_POV_ray|Tutorial FreeCAD POV ray]]
| Raytracing Workbench
| Rendering
| Intermediate
| Intermediate
| 2:00
| 2:00
| [[User:Vocx | Vocx]]
| [[User:Vocx|Vocx]]
| 0.18 or above
| 0.18 or above
| None
| None
| No


|-
|-
| [[Tutorial Render with Blender]]
| [[Tutorial_KinematicAssembly|Tutorial KinematicAssembly]]
| Assembly3 Workbench
| Rendering
| Beginner
| Intermediate
| 0:30
| [[User:FBXL5|FBXL5]]
| 0.20 or above
| None

|-
| [[Tutorial_KinematicController|Tutorial KinematicController]]
| Programming
| Intermediate
| 1:00
| 1:00
| [[User:Vocx | Vocx]]
| [[User:FBXL5|FBXL5]]
| 0.18 or above
| 0.20 or above
| None
| None
| No


|-
|-
| [[Tutorial_KinematicSkeleton|Tutorial KinematicSkeleton]]
| [[VRML Preparation for Robot Simulation]]
| Robot Workbench
| Assembly3 Workbench
| Intermediate
| Intermediate
|
| 0:40
| [[User:FBXL5|FBXL5]]
|
| 0.11.4252ppa1
| 0.20
|
| None
| No


|-
|-
| [[Tutorial_Render_with_Blender|Tutorial Render with Blender]]
| [[Washers]]
| Rendering
|
| Intermediate
|
|
| 1:00
| [[User:Vocx|Vocx]]
|
| 0.18 or above
|
| None
| None
| Yes


|-
|-
| [[VRML_Preparation_for_Robot_Simulation|VRML Preparation for Robot Simulation]]
| [[Whiffle Ball tutorial]]
| Robot Workbench
| Product design
| Intermediate
|
|
| 0.11.4252ppa1
|

|-
| [[Whiffle_Ball_tutorial|Whiffle Ball tutorial]]
| Product design
| Beginner
| Beginner
| 0:30
| 0:30
| r-frank and vocx
| r-frank and vocx
| 0.17 and above
| 0.17 or above
| [https://github.com/FreeCAD/Examples/blob/master/Whiffle_Ball_Tutorial_ExampleFiles/WhiffleBall_Tutorial_FCWiki.FCStd?raw=true WhiffleBall_Tutorial_FCWiki.FCStd]
| [https://github.com/FreeCAD/Examples/blob/master/Whiffle_Ball_Tutorial_ExampleFiles/WhiffleBall_Tutorial_FCWiki.FCStd?raw=true WhiffleBall_Tutorial_FCWiki.FCStd]
| No


|-
|-
| [[Wikihouse porting tutorial]]
| [[Wikihouse_porting_tutorial|Wikihouse porting tutorial]]
| Import
| Wikihouse porting tutorial
| Intermediate/Advanced
| Intermediate/Advanced
| 1:00
| 1:00
|
|
|
|
|
|
| No


|}
|}




<div class="mw-translate-fuzzy">
{{docnav|List of Commands|Interface Customization}}
{{docnav|List of Commands|Interface Customization}}
</div>


{{Userdocnavi{{#translation:}}}}
{{Userdocnavi{{#translation:}}}}

Latest revision as of 09:18, 18 March 2024

Other languages:

Această pagină prezintă o selecție de tutoriale scrise de înaltă calitae. O listă completă și nesortată de tutoriale puteți găsi la : Category:Tutorials.

If you'd like to contribute with writing wiki documentation and tutorials, see the general wiki guidelines in WikiPages, and read the tutorial guidelines.

Please notice the version of FreeCAD used in the tutorial as some tutorials may use an old version of the program. Although the general modelling process may still work, some tools may have changed.

See also video tutorials and books.

Architectura și Construcții Civile și industriale

Modelarea Pieselor

FreeCAD furnizează două fluxuri de lucru la modelarea pieselor: combinarea obiectelor (o metodă numită constructive solid geometry (CSG)) utilizând Part workbench, sau utilizând metoda de editare feature cu Atelierul PartDesign PartDesign workbench. Vă rugăm să notați că PartDesign work flow s-a schimbat considerabil de la v0.17 încoace: unele dintre tutoriale trebuie updatate.

 * folosind modelarea parametrică și editarea caracteristică cu PartDesign workbench.

Please note that the PartDesign Workbench workflow was considerably changed from FreeCAD 0.17 onward; some of the tutorials haven't been updated and may refer to the 0.16 version.

The Raspberry Pi project has made simple tutorials that are easy to follow, particularly for those new to CAD systems:

Desen 2 D și Sketching

Desenul Technic

MEF

CNC & 3D Printing

Randare

Robot workbench

Atelierul Robotică

Scripting

These are tutorials that are related to scripting or programming. They are geared towards more experienced users, who are already somewhat familiar with the program.

Tutorials - Comprehensive list

Here are listed all the tutorials that are not in the manual regardless of their quality. If a tutorial is listed in the Category:Tutorials and not in this table please insert it.

Tutorial Topic Level Time to complete hh:mm Authors FreeCAD version Example files


Add Button to FEM Toolbar Tutorial Finite Element Analysis JohnWang
Add FEM Constraint Tutorial Finite Element Analysis M42kus
Add FEM Equation Tutorial Finite Element Analysis JohnWang
Adding a new mouse navigation option to FreeCAD (unfinished) Programming Advanced Kunda1 0.19.x None
Advanced Attachment OYX Attachment Intermediate/Advanced drmacro 0.19 None
Advanced TechDraw Tutorial (unfinished) TechDraw Workbench Advanced domad 0.19 None
Aeroplane Part Workbench Beginner 0:10 Hughthecat No
Analysis of reinforced concrete with FEM Finite Element Analysis Intermediate 1:00 HarryvL 0.19 or above
Arch panel tutorial Arch Workbench Beginner 1:00 Yorik
Arch tutorial Modeling Intermediate Yorik 0.14
Basic Attachment Tutorial Attachment Beginner/intermediate 1:00 Bance 0.17 or above Basic Attachment Tutorial.FCStd
Basic modeling tutorial Modelling Beginner 0:15 NormandC Any None
Basic Part Design Tutorial Modeling Beginner Mark Stephen (Quick61) and HarryGeier 0.17 or above Basic Part Design for v0.17
Basic Part Design Tutorial 019 Modeling Beginner 1:00 Carlo Dormeletti and Ed Williams 0.19 or above
Basic Sketcher Tutorial Sketcher Workbench Beginner 1:00 Drei and Vocx 0.19 Basic Sketcher tutorial
Basic TechDraw Tutorial TechDraw Workbench Beginner WandererFan 0.17 or above Basic Part Design for v0.17 Sample Basic TechDraw Tutorial Sample
BIM ingame tutorial Arch Workbench Beginner Yorik
CAM Walkthrough for the Impatient CAM Workbench Chrisb
Code snippets Python Beginner
Creating a simple part with Draft and Part WB Modeling Beginner 1:30 Heda - -
Creating a simple part with Part WB Modeling Beginner 2:00 Heda - -
Creating a simple part with PartDesign Modeling Beginner 1:00 GlouGlou 0.17 or above Creating a simple PartDesign Body.FCStd
Customize Toolbars Customization Beginner 0:05 Mario52 Any None
Draft ShapeString tutorial Product Design Beginner 0:30 r-frank and vocx 0.17 or above Draft_Shapestring_Text
Draft tutorial Draft Workbench Beginner 0:30 Drei and vocx 0.19 Draft tutorial updated
Engine Block Tutorial Part Workbench Beginner 1:00 Andrewbuck40 0.14.3700
Example Combined Footing Reinforcement Workbench Intermediate Shiv Charan 0.20 None
Example Slab Having LShape Rebars Reinforcement Mesh Reinforcement Workbench Intermediate Shiv Charan 0.20 None
Example Slab Having Mesh Of Straight Rebars Reinforcement Workbench Intermediate Shiv Charan 0.20 None
Example Slab Having UShape Rebars Reinforcement Mesh Reinforcement Workbench Intermediate Shiv Charan 0.20 None
Example Slab Spanning in One Direction Reinforcement Workbench Intermediate Shiv Charan 0.20 None
Example Slab Spanning in Two Directions Reinforcement Workbench Intermediate Shiv Charan 0.20 None
Export to STL or OBJ Export Beginner 0:20 r-frank 0.16.6703
Extend FEM Module Finite Element Analysis M42kus
FEM CalculiX Cantilever 3D Finite Element Analysis Beginner 0:10 Bernd 0.16.6377 or above
FEM Example Capacitance Two Balls Finite Element Analysis Beginner Sudhanshu Dubey 0.19 None
FEM Shear of a Composite Block Finite Element Analysis Beginner/Intermediate 0:30 HarryvL 0.17.12960 or above
FEM tutorial Finite Element Analysis Beginner 0:10 Drei 0.17 or above
FEM Tutorial Python Finite Element Analysis Intermediate 0:30 Bernd 0.18.15985 or above
FreeCAD-Ship s60 tutorial Ship Workbench Beginner
FreeCAD-Ship s60 tutorial (II) Ship Workbench Beginner
How to install additional workbenches Programming Medium programmer 0:15 r-frank Any None
How to install macros Programming Medium programmer 0:15 Mario52 Any None
Import from STL or OBJ Import Beginner 0:30 r-frank 0.16.6703
Import OpenSCAD code Import Beginner 0:30 r-frank 0.16.6704 None
Import text and geometry from Inkscape Import Beginner 0:30 r-frank 0.16.6704
Import/Export IFC - compiling IfcOpenShell Arch Workbench Advanced 2:00 Pablo Gil
Measurement Of Angles On Holes TechDraw Workbench Beginner 0:01 AnHi 0.19
PartDesign Bearingholder Tutorial I Product design Beginner 1:00 NormandC
PartDesign Bearingholder Tutorial II Product design Beginner 1:00 NormandC
PartDesign tutorial Sketcher Workbench Beginner 0:15 Drei 0.16 or above
Plot Basic tutorial Plot Workbench Beginner
Plot MultiAxes tutorial Plot workbench Intermediate
Post-Processing of FEM Results with Paraview Finite Element Analysis Intermediate 2:00 HarryvL 0.19 Beam and wall
Private Preference Packs Customization Intermediate/Advanced drmacro 1.0 or above
Python scripting tutorial Programming Intermediate
Raytracing tutorial Raytracing Workbench Beginner 0:10 Drei 0.16 or above
Robot 6-Axis Robot Workbench Intermediate
Robot tutorial Robot Workbench Beginner r-frank
Scripted Parts: Ball Bearing - Part 1 Python Beginner 0:30 r-frank 0.16.6706
Scripted Parts: Ball Bearing - Part 2 Python Beginner 0:30 r-frank 0.16.6706
Scripts Python Beginner onekk Carlo 0.19
Sketcher Micro Tutorial - Constraint Practices Sketcher Workbench Beginner 0:30 Mark Stephen (Quick61) and vocx 0.19 Sketcher Constraints practices
Sketcher reference Sketcher Workbench
Sketcher requirement for a sketch Sketcher Workbench Beginner Maker None
Sketcher Tutorial Sketcher Workbench Beginner Ulrich
TechDraw HowTo Page TechDraw Workbench 0.19 None
TechDraw Pitch Circle Tutorial TechDraw Workbench Beginner 0:10 Andergrin 0.19 None
TechDraw TemplateGenerator TechDraw Workbench Intermediate FBXL5 0.19 None
TechDraw TemplateHowTo TechDraw Workbench Intermediate 1:00 wandererfan 0.17 None
Thread for Screw Tutorial Product design Advanced 1:00 DeepSOIC, Murdic, vocx 0.19 Updated: Thread for screw tutorial
Toothbrush Head Stand Modeling Beginner 1:00 EmmanuelG 0.16 or above Thingiverse 2403310
Topological data scripting Programming Intermediate
Transient FEM analysis Finite Element Analysis
Tutorial custom placing of windows and doors Arch Workbench Intermediate 1:00 Vocx 0.18 or above None
Tutorial for open windows Arch Workbench Beginner 1:00 Vocx 0.18 or above None
Tutorial FreeCAD POV ray Raytracing Workbench Intermediate 2:00 Vocx 0.18 or above None
Tutorial KinematicAssembly Assembly3 Workbench Beginner 0:30 FBXL5 0.20 or above None
Tutorial KinematicController Programming Intermediate 1:00 FBXL5 0.20 or above None
Tutorial KinematicSkeleton Assembly3 Workbench Intermediate 0:40 FBXL5 0.20 None
Tutorial Render with Blender Rendering Intermediate 1:00 Vocx 0.18 or above None
VRML Preparation for Robot Simulation Robot Workbench Intermediate 0.11.4252ppa1
Whiffle Ball tutorial Product design Beginner 0:30 r-frank and vocx 0.17 or above WhiffleBall_Tutorial_FCWiki.FCStd
Wikihouse porting tutorial Import Intermediate/Advanced 1:00


List of Commands
Interface Customization
User documentation
Retrieved from "http://wiki.freecad.org/index.php?title=Tutorials/ro&oldid=1384254"