Tutorials/hr: Difference between revisions

From FreeCAD Documentation
(Created page with "Category:Tutorials/hr")
(Updating to match new version of source page)
Line 73: Line 73:
Figure 11 Deformed Mesh.png|link=[[FEM Shear of a Composite Block]]|[[FEM Shear of a Composite Block|FEM shear analysis of a composite block]] (v0.17) <br/>Study the deformation of a block made of a hard nucleus surrounded by a softer material: create mesh regions, add materials, set up sliding constraints, add shear loads, run the solver, and visualize the results with a clip plane.
Figure 11 Deformed Mesh.png|link=[[FEM Shear of a Composite Block]]|[[FEM Shear of a Composite Block|FEM shear analysis of a composite block]] (v0.17) <br/>Study the deformation of a block made of a hard nucleus surrounded by a softer material: create mesh regions, add materials, set up sliding constraints, add shear loads, run the solver, and visualize the results with a clip plane.
Femconcrete_Wall_3D_rx_PSS.png|link=[[Analysis_of_reinforced_concrete_with_FEM]]|[[Analysis_of_reinforced_concrete_with_FEM|Analysis of reinforced concrete with FEM]] (v0.19) <br/>Estimate the level of reinforcement required in a concrete structure to prevent brittle failure under tension or shear.
Femconcrete_Wall_3D_rx_PSS.png|link=[[Analysis_of_reinforced_concrete_with_FEM]]|[[Analysis_of_reinforced_concrete_with_FEM|Analysis of reinforced concrete with FEM]] (v0.19) <br/>Estimate the level of reinforcement required in a concrete structure to prevent brittle failure under tension or shear.
FEM_post-processing_Paraview.png|link=[[Post-Processing_of_FEM_Results_with_Paraview]]|[[Post-Processing_of_FEM_Results_with_Paraview|Post-Processing of FEM results with Paraview]] (v0.19)<br/>This tutorial explains the basics of transferring data from the FEM Workbench to Paraview and shows some of the options and settings for displaying data.
</gallery>
</gallery>



Revision as of 21:34, 13 February 2020

Ova stranica predstavlja izbornik napisanih vježbi visoke kvalitete koja još nije gotova, nesortirana lista vježbi se može ovdje naći Upute.

Vi možete pogledati na Vanjske Upute i Video Upute koji su linkovi na vanjske web stranice. Koristan izvor video vježbi je na YouTube,upišite FreeCAD u tražilicu.

If you'd like to contribute with writing wiki documentation and tutorials, see the general wiki guidelines in WikiPages, and read the tutorial guidelines.

Please notice the version of FreeCAD used in the tutorial as some tutorials may use an old version of the program. Although the general modelling process may still work, some tools may have changed.

Arhitektura i projektiranje zgrada [BIM]

Modeliranje dijelova

FreeCAD provides two main workflows to modeling parts:

Please note that the PartDesign Workbench workflow was considerably changed from FreeCAD 0.17 onward; some of the tutorials haven't been updated and may refer to the 0.16 version.

The Raspberry Pi project has made simple tutorials that are easy to follow, particularly for those new to CAD systems:

Drafting and Sketching

Tehničko Crtanje

FEM

CNC & 3D Printanje

Uvoz i Izvoz

Iscrtavanje

Robot simulacija

Plotting

Drawings

Development of the Drawing Workbench stopped in FreeCAD 0.16. Consider using the TechDraw Workbench instead.