Tutorials: Difference between revisions

From FreeCAD Documentation
(remove column "unfinished" from table)
(Removed spaces round pipes in pided links.)
Line 195: Line 195:
<!-- Template for new entries
<!-- Template for new entries
|-
|-
| [[Tutorial | Tutorial]]
| [[Tutorial|Tutorial]]
| Topic
| Topic
| Level
| Level
Line 206: Line 206:
<!--T:36-->
<!--T:36-->
|-
|-
| [[Add_FEM_constraint_tutorial | Add FEM constraint tutorial]]
| [[Add_FEM_constraint_tutorial|Add FEM constraint tutorial]]
|
|
|
|
Line 216: Line 216:
<!--T:37-->
<!--T:37-->
|-
|-
| [[Add_FEM_equation_tutorial | Add FEM equation tutorial]]
| [[Add_FEM_equation_tutorial|Add FEM equation tutorial]]
|
|
|
|
Line 226: Line 226:
<!--T:38-->
<!--T:38-->
|-
|-
| [[Aeroplane | Aeroplane]]
| [[Aeroplane|Aeroplane]]
| Part Workbench
| Part Workbench
| Beginner
| Beginner
Line 236: Line 236:
<!--T:39-->
<!--T:39-->
|-
|-
| [[Analysis_of_reinforced_concrete_with_FEM | Analysis of reinforced concrete with FEM]]
| [[Analysis_of_reinforced_concrete_with_FEM|Analysis of reinforced concrete with FEM]]
| Reinforced concrete with FEM
| Reinforced concrete with FEM
| Intermediate
| Intermediate
| 1:00
| 1:00
| [[User:HarryvL | HarryvL]]
| [[User:HarryvL|HarryvL]]
| 0.19 or above
| 0.19 or above
|
|
Line 246: Line 246:
<!--T:40-->
<!--T:40-->
|-
|-
| [[Arch_panel_tutorial | Arch panel tutorial]]
| [[Arch_panel_tutorial|Arch panel tutorial]]
| Modeling an architectural panel
| Modeling an architectural panel
| Beginner
| Beginner
Line 256: Line 256:
<!--T:41-->
<!--T:41-->
|-
|-
| [[Arch_tutorial | Arch tutorial]]
| [[Arch_tutorial|Arch tutorial]]
| Modeling
| Modeling
| Intermediate
| Intermediate
|
|
| [[User:Yorik | Yorik]]
| [[User:Yorik|Yorik]]
| 0.14
| 0.14
|
|
Line 266: Line 266:
<!--T:106-->
<!--T:106-->
|-
|-
| [[Basic_Attachment_Tutorial | Basic Attachment Tutorial]]
| [[Basic_Attachment_Tutorial|Basic Attachment Tutorial]]
| Sketch attachment
| Sketch attachment
| Beginner/intermediate
| Beginner/intermediate
| 01:00
| 01:00
| [[User:Bance | Bance]]
| [[User:Bance|Bance]]
| 0.17 and above
| 0.17 and above
| [https://github.com/BanceFC/Examples/blob/master/Basic_Attachment_Tutorial.FCStd Basic Attachment Tutorial.FCStd]
| [https://github.com/BanceFC/Examples/blob/master/Basic_Attachment_Tutorial.FCStd Basic Attachment Tutorial.FCStd]
Line 276: Line 276:
<!--T:42-->
<!--T:42-->
|-
|-
| [[Basic_modeling_tutorial | Basic modeling tutorial]]
| [[Basic_modeling_tutorial|Basic modeling tutorial]]
| Introduction to modelling
| Introduction to modelling
| Beginner
| Beginner
| 0:15
| 0:15
| [[User:NormandC | NormandC]]
| [[User:NormandC|NormandC]]
| Any
| Any
| None
| None
Line 286: Line 286:
<!--T:44-->
<!--T:44-->
|-
|-
| [[Basic_Part_Design_Tutorial | Basic Part Design Tutorial]]
| [[Basic_Part_Design_Tutorial|Basic Part Design Tutorial]]
| Modeling
| Modeling
| Beginner
| Beginner
|
|
| [[User:Quick61 | Mark Stephen (Quick61)]] and [[User:HarryGeier | HarryGeier]]
| [[User:Quick61|Mark Stephen (Quick61)]] and [[User:HarryGeier|HarryGeier]]
| 0.17 or above
| 0.17 or above
| [https://github.com/FreeCAD/Examples/blob/master/Basic_Part_Design_Tutorial_Example_017_Files/Basic_Part_Design_Tutorial_017.fcstd Basic Part Design for v0.17]
| [https://github.com/FreeCAD/Examples/blob/master/Basic_Part_Design_Tutorial_Example_017_Files/Basic_Part_Design_Tutorial_017.fcstd Basic Part Design for v0.17]
Line 296: Line 296:
<!--T:45-->
<!--T:45-->
|-
|-
| [[Basic_Sketcher_Tutorial | Basic Sketcher Tutorial]]
| [[Basic_Sketcher_Tutorial|Basic Sketcher Tutorial]]
| Sketcher
| Sketcher
| Beginner
| Beginner
| 1:00
| 1:00
| [[User:Drei | Drei]] and [[User:Vocx | Vocx]]
| [[User:Drei|Drei]] and [[User:Vocx|Vocx]]
| 0.19
| 0.19
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=43594 Basic Sketcher tutorial ]
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=43594 Basic Sketcher tutorial ]
Line 306: Line 306:
<!--T:46-->
<!--T:46-->
|-
|-
| [[Basic_TechDraw_Tutorial | Basic TechDraw Tutorial]]
| [[Basic_TechDraw_Tutorial|Basic TechDraw Tutorial]]
| TechDraw Workbench
| TechDraw Workbench
| Beginner
| Beginner
|
|
| [[User:WandererFan | WandererFan]]
| [[User:WandererFan|WandererFan]]
| 0.17 and above
| 0.17 and above
| [https://github.com/FreeCAD/Examples/blob/master/Basic_Part_Design_Tutorial_Example_017_Files/Basic_Part_Design_Tutorial_017.fcstd Basic Part Design for v0.17 Sample] [https://github.com/FreeCAD/Examples/blob/master/Basic_TechDraw_Tutorial_Example_Files/Basic_TechDraw_Tutorial.fcstd Basic TechDraw Tutorial Sample]
| [https://github.com/FreeCAD/Examples/blob/master/Basic_Part_Design_Tutorial_Example_017_Files/Basic_Part_Design_Tutorial_017.fcstd Basic Part Design for v0.17 Sample] [https://github.com/FreeCAD/Examples/blob/master/Basic_TechDraw_Tutorial_Example_Files/Basic_TechDraw_Tutorial.fcstd Basic TechDraw Tutorial Sample]
Line 316: Line 316:
<!--T:47-->
<!--T:47-->
|-
|-
| [[Code_snippets | Code snippets]]
| [[Code_snippets|Code snippets]]
| Python
| Python
| Beginner
| Beginner
Line 326: Line 326:
<!--T:48-->
<!--T:48-->
|-
|-
| [[Creating_a_simple_part_with_PartDesign | Creating a simple part with PartDesign]]
| [[Creating_a_simple_part_with_PartDesign|Creating a simple part with PartDesign]]
| Modeling
| Modeling
| Beginner
| Beginner
Line 336: Line 336:
<!--T:49-->
<!--T:49-->
|-
|-
| [[Customize_Toolbars | Customize Toolbars]]
| [[Customize_Toolbars|Customize Toolbars]]
|
|
| Beginner
| Beginner
| 0:05
| 0:05
| [[User:Mario52 | Mario52]]
| [[User:Mario52|Mario52]]
| Any
| Any
| None
| None
Line 346: Line 346:
<!--T:50-->
<!--T:50-->
|-
|-
| [[Draft_ShapeString_tutorial | Draft ShapeString tutorial]]
| [[Draft_ShapeString_tutorial|Draft ShapeString tutorial]]
| Product Design
| Product Design
| Beginner
| Beginner
Line 356: Line 356:
<!--T:51-->
<!--T:51-->
|-
|-
| [[Draft_tutorial | Draft tutorial]]
| [[Draft_tutorial|Draft tutorial]]
| Drafting
| Drafting
| Beginner
| Beginner
| 0:30
| 0:30
| [[User:Drei | Drei]] and vocx
| [[User:Drei|Drei]] and vocx
| 0.19
| 0.19
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=43651 Draft tutorial updated]
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=43651 Draft tutorial updated]
Line 366: Line 366:
<!--T:53-->
<!--T:53-->
|-
|-
| [[Drawing_Template_HowTo | Drawing Template HowTo (obsolete)]]
| [[Drawing_Template_HowTo|Drawing Template HowTo (obsolete)]]
| 2D Drafting
| 2D Drafting
| Intermediate
| Intermediate
| 1:00
| 1:00
| [[User:Quick61 | Mark Stephen (Quick61)]]
| [[User:Quick61|Mark Stephen (Quick61)]]
| 0.14.3700 or above
| 0.14.3700 or above
| None
| None
Line 376: Line 376:
<!--T:54-->
<!--T:54-->
|-
|-
| [[Drawing_tutorial | Drawing tutorial (obsolete)]]
| [[Drawing_tutorial|Drawing tutorial (obsolete)]]
| Blueprints / Drawings
| Blueprints / Drawings
| Beginner
| Beginner
| 0:15
| 0:15
| [[User:Drei | Drei]]
| [[User:Drei|Drei]]
| 0.16 or above
| 0.16 or above
|
|
Line 386: Line 386:
<!--T:55-->
<!--T:55-->
|-
|-
| [[Dxf_Importer_Install | Dxf Importer Install]]
| [[Dxf_Importer_Install|Dxf Importer Install]]
|
|
| Intermediate
| Intermediate
| 0:05
| 0:05
| [[User:Mario52 | Mario52]]
| [[User:Mario52|Mario52]]
| Any
| Any
| None
| None
Line 396: Line 396:
<!--T:56-->
<!--T:56-->
|-
|-
| [[Engine_Block_Tutorial | Engine Block Tutorial]]
| [[Engine_Block_Tutorial|Engine Block Tutorial]]
| Part Workbench
| Part Workbench
| Beginner
| Beginner
Line 406: Line 406:
<!--T:57-->
<!--T:57-->
|-
|-
| [[Export_to_STL_or_OBJ | Export to STL or OBJ]]
| [[Export_to_STL_or_OBJ|Export to STL or OBJ]]
| Export to STL or OBJ
| Export to STL or OBJ
| Beginner
| Beginner
Line 416: Line 416:
<!--T:58-->
<!--T:58-->
|-
|-
| [[Extend_FEM_Module | Extend FEM Module]]
| [[Extend_FEM_Module|Extend FEM Module]]
|
|
|
|
|
|
| [[User:M42kus | M42kus]]
| [[User:M42kus|M42kus]]
|
|
|
|
Line 426: Line 426:
<!--T:59-->
<!--T:59-->
|-
|-
| [[FEM_Beginner_tutorial | FEM Beginner tutorial]]
| [[FEM_Beginner_tutorial|FEM Beginner tutorial]]
| FEM Beginner tutorial
| FEM Beginner tutorial
| Beginner
| Beginner
Line 436: Line 436:
<!--T:60-->
<!--T:60-->
|-
|-
| [[FEM_CalculiX_Cantilever_3D | FEM CalculiX Cantilever 3D]]
| [[FEM_CalculiX_Cantilever_3D|FEM CalculiX Cantilever 3D]]
| Finite Element Analysis
| Finite Element Analysis
| Beginner
| Beginner
| 0:10
| 0:10
| [[User:Bernd | Bernd]]
| [[User:Bernd|Bernd]]
| 0.16.6377 or above
| 0.16.6377 or above
|
|
Line 446: Line 446:
<!--T:61-->
<!--T:61-->
|-
|-
| [[FEM_Shear_of_a_Composite_Block | FEM Shear of a Composite Block]]
| [[FEM_Shear_of_a_Composite_Block|FEM Shear of a Composite Block]]
| Finite Element Analysis
| Finite Element Analysis
| Beginner/Intermediate
| Beginner/Intermediate
| 0:300
| 0:300
| [[User:HarryvL | HarryvL]]
| [[User:HarryvL|HarryvL]]
| 0.17.12960 or above
| 0.17.12960 or above
|
|
Line 456: Line 456:
<!--T:62-->
<!--T:62-->
|-
|-
| [[FEM_tutorial | FEM tutorial]]
| [[FEM_tutorial|FEM tutorial]]
| Finite Element Analysis
| Finite Element Analysis
| Beginner
| Beginner
| 0:10
| 0:10
| [[User:Drei | Drei]]
| [[User:Drei|Drei]]
| 0.16.6700 or above
| 0.16.6700 or above
|
|
Line 466: Line 466:
<!--T:63-->
<!--T:63-->
|-
|-
| [[FEM_Tutorial_Python | FEM Tutorial Python]]
| [[FEM_Tutorial_Python|FEM Tutorial Python]]
| Finite Element Analysis
| Finite Element Analysis
| Intermediate
| Intermediate
| 0:30
| 0:30
| [[User:Bernd | Bernd]]
| [[User:Bernd|Bernd]]
| 0.18.15985 or above
| 0.18.15985 or above
|
|
Line 476: Line 476:
<!--T:64-->
<!--T:64-->
|-
|-
| [[FreeCAD-Ship_s60_tutorial | FreeCAD-Ship s60 tutorial]]
| [[FreeCAD-Ship_s60_tutorial|FreeCAD-Ship s60 tutorial]]
| Ship Workbench
| Ship Workbench
| Beginner
| Beginner
Line 486: Line 486:
<!--T:65-->
<!--T:65-->
|-
|-
| [[FreeCAD-Ship_s60_tutorial_(II) | FreeCAD-Ship s60 tutorial (II)]]
| [[FreeCAD-Ship_s60_tutorial_(II)|FreeCAD-Ship s60 tutorial (II)]]
| Ship Workbench
| Ship Workbench
| Beginner
| Beginner
Line 496: Line 496:
<!--T:66-->
<!--T:66-->
|-
|-
| [[How_to_install_additional_workbenches | How to install additional workbenches]]
| [[How_to_install_additional_workbenches|How to install additional workbenches]]
| Programming
| Programming
| Medium programmer
| Medium programmer
| 0:15
| 0:15
| [[User:R-frank | r-frank]]
| [[User:R-frank|r-frank]]
| Any
| Any
| None
| None
Line 506: Line 506:
<!--T:67-->
<!--T:67-->
|-
|-
| [[How_to_install_macros | How to install macros]]
| [[How_to_install_macros|How to install macros]]
| Programming
| Programming
| Medium programmer
| Medium programmer
| 0:15
| 0:15
| [[User:Mario52 | Mario52]]
| [[User:Mario52|Mario52]]
| Any
| Any
| None
| None
Line 516: Line 516:
<!--T:68-->
<!--T:68-->
|-
|-
| [[Import_from_STL_or_OBJ | Import from STL or OBJ]]
| [[Import_from_STL_or_OBJ|Import from STL or OBJ]]
| Import from STL or OBJ
| Import from STL or OBJ
| Beginner
| Beginner
Line 526: Line 526:
<!--T:69-->
<!--T:69-->
|-
|-
| [[Import_OpenSCAD_code | Import OpenSCAD code]]
| [[Import_OpenSCAD_code|Import OpenSCAD code]]
| Import OpenSCAD code
| Import OpenSCAD code
| Beginner
| Beginner
Line 536: Line 536:
<!--T:70-->
<!--T:70-->
|-
|-
| [[Import_text_and_geometry_from_Inkscape | Import text and geometry from Inkscape]]
| [[Import_text_and_geometry_from_Inkscape|Import text and geometry from Inkscape]]
| Import text and geometry from Inkscape
| Import text and geometry from Inkscape
| Beginner
| Beginner
Line 546: Line 546:
<!--T:114-->
<!--T:114-->
|-
|-
| [[Import/Export_IFC_-_compiling_IfcOpenShell | Import/Export IFC - compiling IfcOpenShell]]
| [[Import/Export_IFC_-_compiling_IfcOpenShell|Import/Export IFC - compiling IfcOpenShell]]
| Arch Workbench
| Arch Workbench
| Advanced
| Advanced
Line 556: Line 556:
<!--T:71-->
<!--T:71-->
|-
|-
| [[Measurement_Of_Angles_On_Holes | Measurement Of Angles On Holes]]
| [[Measurement_Of_Angles_On_Holes|Measurement Of Angles On Holes]]
| TechDraw Workbench
| TechDraw Workbench
| Beginner
| Beginner
Line 566: Line 566:
<!--T:109-->
<!--T:109-->
|-
|-
| [[PartDesign_Bearingholder_Tutorial_I | PartDesign Bearingholder Tutorial I]]
| [[PartDesign_Bearingholder_Tutorial_I|PartDesign Bearingholder Tutorial I]]
| Product design - Bearingholder #1
| Product design - Bearingholder #1
| Beginner
| Beginner
Line 576: Line 576:
<!--T:110-->
<!--T:110-->
|-
|-
| [[PartDesign_Bearingholder_Tutorial_II | PartDesign Bearingholder Tutorial II]]
| [[PartDesign_Bearingholder_Tutorial_II|PartDesign Bearingholder Tutorial II]]
| Product design - Bearingholder #2
| Product design - Bearingholder #2
| Beginner
| Beginner
Line 586: Line 586:
<!--T:72-->
<!--T:72-->
|-
|-
| [[PartDesign_tutorial | PartDesign tutorial]]
| [[PartDesign_tutorial|PartDesign tutorial]]
| Sketcher
| Sketcher
| Beginner
| Beginner
| 0:15
| 0:15
| [[User:Drei | Drei]]
| [[User:Drei|Drei]]
| 0.16 or above
| 0.16 or above
|
|
Line 596: Line 596:
<!--T:77-->
<!--T:77-->
|-
|-
| [[Path_Walkthrough_for_the_Impatient | Path Walkthrough for the Impatient]]
| [[Path_Walkthrough_for_the_Impatient|Path Walkthrough for the Impatient]]
| Path Workbench
| Path Workbench
|
|
Line 606: Line 606:
<!--T:78-->
<!--T:78-->
|-
|-
| [[Plot_Basic_tutorial | Plot Basic tutorial]]
| [[Plot_Basic_tutorial|Plot Basic tutorial]]
| Plot Workbench Basic Tutorial
| Plot Workbench Basic Tutorial
| Beginner
| Beginner
Line 616: Line 616:
<!--T:79-->
<!--T:79-->
|-
|-
| [[Plot_MultiAxes_tutorial | Plot MultiAxes tutorial]]
| [[Plot_MultiAxes_tutorial|Plot MultiAxes tutorial]]
| Plot workbench
| Plot workbench
| Intermediate
| Intermediate
Line 626: Line 626:
<!--T:80-->
<!--T:80-->
|-
|-
| [[Post-Processing_of_FEM_Results_with_Paraview | Post-Processing of FEM Results with Paraview]]
| [[Post-Processing_of_FEM_Results_with_Paraview|Post-Processing of FEM Results with Paraview]]
| Post-Processing of FEM Results with ParaView
| Post-Processing of FEM Results with ParaView
| Intermediate
| Intermediate
| 2:00
| 2:00
| [[User:HarryvL | HarryvL]]
| [[User:HarryvL|HarryvL]]
| 0.19
| 0.19
| [https://forum.freecadweb.org/download/file.php?id=103403 Beam] and [https://forum.freecadweb.org/download/file.php?id=103557 wall]
| [https://forum.freecadweb.org/download/file.php?id=103403 Beam] and [https://forum.freecadweb.org/download/file.php?id=103557 wall]
Line 636: Line 636:
<!--T:81-->
<!--T:81-->
|-
|-
| [[Python_scripting_tutorial | Python scripting tutorial]]
| [[Python_scripting_tutorial|Python scripting tutorial]]
| Programming
| Programming
| Intermediate
| Intermediate
Line 646: Line 646:
<!--T:82-->
<!--T:82-->
|-
|-
| [[Raytracing_tutorial | Raytracing tutorial]]
| [[Raytracing_tutorial|Raytracing tutorial]]
| Raytracing
| Raytracing
| Beginner
| Beginner
| 0:010
| 0:010
| [[User:Drei | Drei]]
| [[User:Drei|Drei]]
| 0.16 or above
| 0.16 or above
|
|
Line 656: Line 656:
<!--T:83-->
<!--T:83-->
|-
|-
| [[Robot_6-Axis | Robot 6-Axis]]
| [[Robot_6-Axis|Robot 6-Axis]]
| Robot Workbench
| Robot Workbench
| Intermediate
| Intermediate
Line 666: Line 666:
<!--T:84-->
<!--T:84-->
|-
|-
| [[Robot_tutorial | Robot tutorial]]
| [[Robot_tutorial|Robot tutorial]]
| Robot Workbench
| Robot Workbench
| Beginner
| Beginner
Line 676: Line 676:
<!--T:85-->
<!--T:85-->
|-
|-
| [[Scripted_Parts:_Ball_Bearing_-_Part_1 | Scripted Parts: Ball Bearing - Part 1]]
| [[Scripted_Parts:_Ball_Bearing_-_Part_1|Scripted Parts: Ball Bearing - Part 1]]
| Part Scripting - Ball Bearing #1
| Part Scripting - Ball Bearing #1
| Beginner
| Beginner
Line 686: Line 686:
<!--T:86-->
<!--T:86-->
|-
|-
| [[Scripted_Parts:_Ball_Bearing_-_Part_2 | Scripted Parts: Ball Bearing - Part 2]]
| [[Scripted_Parts:_Ball_Bearing_-_Part_2|Scripted Parts: Ball Bearing - Part 2]]
| Part Scripting - Ball Bearing #2
| Part Scripting - Ball Bearing #2
| Beginner
| Beginner
Line 696: Line 696:
<!--T:87-->
<!--T:87-->
|-
|-
| [[Scripts | Scripts]]
| [[Scripts|Scripts]]
| Scripting
| Scripting
| Beginner
| Beginner
Line 706: Line 706:
<!--T:89-->
<!--T:89-->
|-
|-
| [[Sketcher_Micro_Tutorial_-_Constraint_Practices | Sketcher Micro Tutorial - Constraint Practices]]
| [[Sketcher_Micro_Tutorial_-_Constraint_Practices|Sketcher Micro Tutorial - Constraint Practices]]
| Sketcher
| Sketcher
| Beginner
| Beginner
| 0:30
| 0:30
| [[User:Quick61 | Mark Stephen (Quick61)]] and vocx
| [[User:Quick61|Mark Stephen (Quick61)]] and vocx
| 0.19
| 0.19
| [https://forum.freecadweb.org/viewtopic.php?f=36&p=371659#p371659 Sketcher Constraints practices]
| [https://forum.freecadweb.org/viewtopic.php?f=36&p=371659#p371659 Sketcher Constraints practices]
Line 716: Line 716:
<!--T:90-->
<!--T:90-->
|-
|-
| [[Sketcher_reference | Sketcher reference]]
| [[Sketcher_reference|Sketcher reference]]
|
|
|
|
Line 726: Line 726:
<!--T:91-->
<!--T:91-->
|-
|-
| [[Sketcher_requirement_for_a_sketch | Sketcher requirement for a sketch]]
| [[Sketcher_requirement_for_a_sketch|Sketcher requirement for a sketch]]
| Sketcher
| Sketcher
| Beginner
| Beginner
|
|
| [[User:Maker | Maker]]
| [[User:Maker|Maker]]
|
|
| None
| None
Line 736: Line 736:
<!--T:92-->
<!--T:92-->
|-
|-
| [[Sketcher_Tutorial | Sketcher Tutorial]]
| [[Sketcher_Tutorial|Sketcher Tutorial]]
| Sketcher
| Sketcher
| Beginner
| Beginner
Line 746: Line 746:
<!--T:115-->
<!--T:115-->
|-
|-
| [[TechDraw_pitch_circle_tutorial | TechDraw pitch circle tutorial]]
| [[TechDraw_pitch_circle_tutorial|TechDraw pitch circle tutorial]]
| TechDraw Workbench
| TechDraw Workbench
| Beginner
| Beginner
Line 756: Line 756:
<!--T:93-->
<!--T:93-->
|-
|-
| [[TechDraw_TemplateHowTo | TechDraw TemplateHowTo]]
| [[TechDraw_TemplateHowTo|TechDraw TemplateHowTo]]
| TechDraw Workbench
| TechDraw Workbench
| Intermediate
| Intermediate
Line 766: Line 766:
<!--T:94-->
<!--T:94-->
|-
|-
| [[Thread_for_Screw_Tutorial | Thread for Screw Tutorial]]
| [[Thread_for_Screw_Tutorial|Thread for Screw Tutorial]]
| Product design
| Product design
| Advanced
| Advanced
| 1:00
| 1:00
| [[User:DeepSOIC | DeepSOIC]], [[User:Murdic | Murdic]], vocx
| [[User:DeepSOIC|DeepSOIC]], [[User:Murdic|Murdic]], vocx
| 0.19
| 0.19
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=44668 Updated: Thread for screw tutorial]
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=44668 Updated: Thread for screw tutorial]
Line 776: Line 776:
<!--T:95-->
<!--T:95-->
|-
|-
| [[Toothbrush_Head_Stand | Toothbrush Head Stand]]
| [[Toothbrush_Head_Stand|Toothbrush Head Stand]]
| Modeling
| Modeling
| Beginner
| Beginner
| 1:00
| 1:00
| [[User:EmmanuelG | EmmanuelG]]
| [[User:EmmanuelG|EmmanuelG]]
| 0.16 or greater
| 0.16 or greater
| [https://www.thingiverse.com/thing:2403310 Thingiverse 2403310]
| [https://www.thingiverse.com/thing:2403310 Thingiverse 2403310]
Line 786: Line 786:
<!--T:96-->
<!--T:96-->
|-
|-
| [[Topological_data_scripting | Topological data scripting]]
| [[Topological_data_scripting|Topological data scripting]]
| Programming
| Programming
| Intermediate
| Intermediate
Line 796: Line 796:
<!--T:97-->
<!--T:97-->
|-
|-
| [[Transient_FEM_analysis | Transient FEM analysis]]
| [[Transient_FEM_analysis|Transient FEM analysis]]
| Transient FEM analysis
| Transient FEM analysis
|
|
Line 806: Line 806:
<!--T:98-->
<!--T:98-->
|-
|-
| [[Tutorial_custom_placing_of_windows_and_doors | Tutorial custom placing of windows and doors]]
| [[Tutorial_custom_placing_of_windows_and_doors|Tutorial custom placing of windows and doors]]
| Architecture
| Architecture
| Intermediate
| Intermediate
| 1:00
| 1:00
| [[User:Vocx | Vocx]]
| [[User:Vocx|Vocx]]
| 0.18 or above
| 0.18 or above
| None
| None
Line 816: Line 816:
<!--T:99-->
<!--T:99-->
|-
|-
| [[Tutorial_for_open_windows | Tutorial for open windows]]
| [[Tutorial_for_open_windows|Tutorial for open windows]]
| Architecture
| Architecture
| Beginner
| Beginner
| 1:00
| 1:00
| [[User:Vocx | Vocx]]
| [[User:Vocx|Vocx]]
| 0.18 or above
| 0.18 or above
| None
| None
Line 826: Line 826:
<!--T:100-->
<!--T:100-->
|-
|-
| [[Tutorial_FreeCAD_POV_ray | Tutorial FreeCAD POV ray]]
| [[Tutorial_FreeCAD_POV_ray|Tutorial FreeCAD POV ray]]
| Rendering
| Rendering
| Intermediate
| Intermediate
| 2:00
| 2:00
| [[User:Vocx | Vocx]]
| [[User:Vocx|Vocx]]
| 0.18 or above
| 0.18 or above
| None
| None
Line 836: Line 836:
<!--T:101-->
<!--T:101-->
|-
|-
| [[Tutorial_Render_with_Blender | Tutorial Render with Blender]]
| [[Tutorial_Render_with_Blender|Tutorial Render with Blender]]
| Rendering
| Rendering
| Intermediate
| Intermediate
| 1:00
| 1:00
| [[User:Vocx | Vocx]]
| [[User:Vocx|Vocx]]
| 0.18 or above
| 0.18 or above
| None
| None
Line 846: Line 846:
<!--T:102-->
<!--T:102-->
|-
|-
| [[VRML_Preparation_for_Robot_Simulation | VRML Preparation for Robot Simulation]]
| [[VRML_Preparation_for_Robot_Simulation|VRML Preparation for Robot Simulation]]
| Robot Workbench
| Robot Workbench
| Intermediate
| Intermediate
Line 856: Line 856:
<!--T:103-->
<!--T:103-->
|-
|-
| [[Washers | Washers]]
| [[Washers|Washers]]
|
|
|
|
Line 866: Line 866:
<!--T:104-->
<!--T:104-->
|-
|-
| [[Whiffle_Ball_tutorial | Whiffle Ball tutorial]]
| [[Whiffle_Ball_tutorial|Whiffle Ball tutorial]]
| Product design
| Product design
| Beginner
| Beginner
Line 876: Line 876:
<!--T:105-->
<!--T:105-->
|-
|-
| [[Wikihouse_porting_tutorial | Wikihouse porting tutorial]]
| [[Wikihouse_porting_tutorial|Wikihouse porting tutorial]]
| Wikihouse porting tutorial
| Wikihouse porting tutorial
| Intermediate/Advanced
| Intermediate/Advanced

Revision as of 19:41, 18 October 2021

This page presents a selection of high quality written tutorials. A complete, unsorted list of tutorials can be found in Category:Tutorials, a complete and sortable one can be found in the table below.

Also visit video tutorials and offsite tutorials for tutorials hosted on external sites. A useful source of video tutorials is YouTube.

If you'd like to contribute with writing wiki documentation and tutorials, see the general wiki guidelines in WikiPages, and read the tutorial guidelines.

Please notice the version of FreeCAD used in the tutorial as some tutorials may use an old version of the program. Although the general modelling process may still work, some tools may have changed.

Architecture and BIM

Modeling parts

FreeCAD provides two main workflows to modeling parts:

Please note that the PartDesign Workbench workflow was considerably changed from FreeCAD 0.17 onward; some of the tutorials haven't been updated and may refer to the 0.16 version.

The Raspberry Pi project has made simple tutorials that are easy to follow, particularly for those new to CAD systems:

Drafting and Sketching

Technical Drawings

FEM

CNC & 3D Printing

Rendering

Robot workbench

Development of the Robot Workbench is currently abandoned. Please inquire on our forum regarding any news or alternative workbenches.

Plotting

Scripting

These are tutorials that are related to scripting or programming. They are geared towards more experienced users, who are already somewhat familiar with the program.

Tutorials - Comprehensive list

Here are listed all the tutorials that are not in the manual regardless of their quality. If a tutorial is listed in the Category:Tutorials and not in this table please insert it.

Tutorial Topic Level Time to complete hh:mm Authors FreeCAD version Example files


Add FEM constraint tutorial M42kus
Add FEM equation tutorial JohnWang
Aeroplane Part Workbench Beginner 0:10 Hughthecat
Analysis of reinforced concrete with FEM Reinforced concrete with FEM Intermediate 1:00 HarryvL 0.19 or above
Arch panel tutorial Modeling an architectural panel Beginner 1:00 Yorik
Arch tutorial Modeling Intermediate Yorik 0.14
Basic Attachment Tutorial Sketch attachment Beginner/intermediate 01:00 Bance 0.17 and above Basic Attachment Tutorial.FCStd
Basic modeling tutorial Introduction to modelling Beginner 0:15 NormandC Any None
Basic Part Design Tutorial Modeling Beginner Mark Stephen (Quick61) and HarryGeier 0.17 or above Basic Part Design for v0.17
Basic Sketcher Tutorial Sketcher Beginner 1:00 Drei and Vocx 0.19 Basic Sketcher tutorial
Basic TechDraw Tutorial TechDraw Workbench Beginner WandererFan 0.17 and above Basic Part Design for v0.17 Sample Basic TechDraw Tutorial Sample
Code snippets Python Beginner
Creating a simple part with PartDesign Modeling Beginner 1:00 GlouGlou 0.17 or above Creating a simple PartDesign Body.FCStd
Customize Toolbars Beginner 0:05 Mario52 Any None
Draft ShapeString tutorial Product Design Beginner 0:30 r-frank and vocx 0.17 and above Draft_Shapestring_Text
Draft tutorial Drafting Beginner 0:30 Drei and vocx 0.19 Draft tutorial updated
Drawing Template HowTo (obsolete) 2D Drafting Intermediate 1:00 Mark Stephen (Quick61) 0.14.3700 or above None
Drawing tutorial (obsolete) Blueprints / Drawings Beginner 0:15 Drei 0.16 or above
Dxf Importer Install Intermediate 0:05 Mario52 Any None
Engine Block Tutorial Part Workbench Beginner 1:00 Andrewbuck40 0.14.3700
Export to STL or OBJ Export to STL or OBJ Beginner 0:20 r-frank 0.16.6703
Extend FEM Module M42kus
FEM Beginner tutorial FEM Beginner tutorial Beginner thschrader 0.17.11622+ Whiffle Ball
FEM CalculiX Cantilever 3D Finite Element Analysis Beginner 0:10 Bernd 0.16.6377 or above
FEM Shear of a Composite Block Finite Element Analysis Beginner/Intermediate 0:300 HarryvL 0.17.12960 or above
FEM tutorial Finite Element Analysis Beginner 0:10 Drei 0.16.6700 or above
FEM Tutorial Python Finite Element Analysis Intermediate 0:30 Bernd 0.18.15985 or above
FreeCAD-Ship s60 tutorial Ship Workbench Beginner
FreeCAD-Ship s60 tutorial (II) Ship Workbench Beginner
How to install additional workbenches Programming Medium programmer 0:15 r-frank Any None
How to install macros Programming Medium programmer 0:15 Mario52 Any None
Import from STL or OBJ Import from STL or OBJ Beginner 0:30 r-frank 1.0 0.16.6703
Import OpenSCAD code Import OpenSCAD code Beginner 0:30 r-frank 0.16.6704 None
Import text and geometry from Inkscape Import text and geometry from Inkscape Beginner 0:30 r-frank 0.16.6704
Import/Export IFC - compiling IfcOpenShell Arch Workbench Advanced 2:00 Pablo Gil
Measurement Of Angles On Holes TechDraw Workbench Beginner 0:01 AnHi 0.19
PartDesign Bearingholder Tutorial I Product design - Bearingholder #1 Beginner 60 minutes NormandC
PartDesign Bearingholder Tutorial II Product design - Bearingholder #2 Beginner 60 minutes NormandC
PartDesign tutorial Sketcher Beginner 0:15 Drei 0.16 or above
Path Walkthrough for the Impatient Path Workbench Chrisb
Plot Basic tutorial Plot Workbench Basic Tutorial Beginner
Plot MultiAxes tutorial Plot workbench Intermediate
Post-Processing of FEM Results with Paraview Post-Processing of FEM Results with ParaView Intermediate 2:00 HarryvL 0.19 Beam and wall
Python scripting tutorial Programming Intermediate
Raytracing tutorial Raytracing Beginner 0:010 Drei 0.16 or above
Robot 6-Axis Robot Workbench Intermediate
Robot tutorial Robot Workbench Beginner r-frank
Scripted Parts: Ball Bearing - Part 1 Part Scripting - Ball Bearing #1 Beginner 0:30 r-frank 0.16.6706
Scripted Parts: Ball Bearing - Part 2 Part Scripting - Ball Bearing #2 Beginner 0:30 r-frank 0.16.6706
Scripts Scripting Beginner onekk Carlo 0.19
Sketcher Micro Tutorial - Constraint Practices Sketcher Beginner 0:30 Mark Stephen (Quick61) and vocx 0.19 Sketcher Constraints practices
Sketcher reference
Sketcher requirement for a sketch Sketcher Beginner Maker None
Sketcher Tutorial Sketcher Beginner Ulrich
TechDraw pitch circle tutorial TechDraw Workbench Beginner 0:10 Andergrin 0.19 None
TechDraw TemplateHowTo TechDraw Workbench Intermediate 1:00 wandererfan 0.17 None
Thread for Screw Tutorial Product design Advanced 1:00 DeepSOIC, Murdic, vocx 0.19 Updated: Thread for screw tutorial
Toothbrush Head Stand Modeling Beginner 1:00 EmmanuelG 0.16 or greater Thingiverse 2403310
Topological data scripting Programming Intermediate
Transient FEM analysis Transient FEM analysis
Tutorial custom placing of windows and doors Architecture Intermediate 1:00 Vocx 0.18 or above None
Tutorial for open windows Architecture Beginner 1:00 Vocx 0.18 or above None
Tutorial FreeCAD POV ray Rendering Intermediate 2:00 Vocx 0.18 or above None
Tutorial Render with Blender Rendering Intermediate 1:00 Vocx 0.18 or above None
VRML Preparation for Robot Simulation Robot Workbench Intermediate 0.11.4252ppa1
Washers None
Whiffle Ball tutorial Product design Beginner 0:30 r-frank and vocx 0.17 and above WhiffleBall_Tutorial_FCWiki.FCStd
Wikihouse porting tutorial Wikihouse porting tutorial Intermediate/Advanced 1:00