Difference between revisions of "Tutorials"

From FreeCAD Documentation
Jump to navigation Jump to search
(Slightly reworded)
(Marked this version for translation)
 
(74 intermediate revisions by 9 users not shown)
Line 1: Line 1:
 
<languages/>
 
<languages/>
 
<translate>
 
<translate>
 +
 +
<!--T:111-->
 +
{{TOCright}}
 +
 
<!--T:1-->
 
<!--T:1-->
This page presents a selection of high quality written tutorials. A complete, unsorted list of tutorials can be found in [[:Category:Tutorials]].
+
This page presents a selection of high quality written tutorials. A complete, unsorted list of tutorials can be found in [[:Category:Tutorials]], a complete and sortable one can be found in the [[Tutorials#Tutorials - Comprehensive list|table below]].
 
    
 
    
Visit [[offsite tutorials]] and [[video tutorials]] for lists of tutorials hosted on external sites. A useful source of video tutorials is [https://YouTube.com YouTube].
+
Also visit [[Video_tutorials|video tutorials]] and [[Offsite_tutorials|offsite tutorials]] for tutorials hosted on external sites. A useful source of video tutorials is [https://YouTube.com YouTube].
  
 
<!--T:24-->
 
<!--T:24-->
Line 29: Line 33:
 
<translate>
 
<translate>
  
==Modeling Parts== <!--T:4-->
+
==Modeling parts== <!--T:4-->
  
 
<!--T:5-->
 
<!--T:5-->
 
FreeCAD provides two main workflows to modeling parts:
 
FreeCAD provides two main workflows to modeling parts:
* combining objects, a method called [https://en.wikipedia.org/wiki/Constructive_solid_geometry constructive solid geometry (CSG)] using the [[Part Module|Part workbench]], and
+
* combining objects, a method called [[Constructive solid geometry|Constructive solid geometry]] (CSG) using the [[Part Module|Part workbench]], and
* using parametric modelling and [[Glossary#Feature|feature]] editing with the [[PartDesign Workbench]].
+
* using parametric modelling and [[Feature editing|feature editing]] with the [[PartDesign Workbench|PartDesign Workbench]].
  
 
<!--T:23-->
 
<!--T:23-->
Please note that the [[PartDesign Workbench]] workflow was considerably changed from FreeCAD 0.17 onward; some of the tutorials haven't been updated and may refer to the 0.16 version.
+
Please note that the [[PartDesign Workbench|PartDesign Workbench]] workflow was considerably changed from FreeCAD 0.17 onward; some of the tutorials haven't been updated and may refer to the 0.16 version.
  
 
</translate>
 
</translate>
Line 44: Line 48:
 
<!--T:6-->
 
<!--T:6-->
 
File:GGTuto1 Vue.PNG|link=[[Creating a simple part with PartDesign]]|[[Creating a simple part with PartDesign]] (v0.17)<br/>An introduction to the PartDesign workflow: tracing a sketch, using pad, pocket, and moving the object.
 
File:GGTuto1 Vue.PNG|link=[[Creating a simple part with PartDesign]]|[[Creating a simple part with PartDesign]] (v0.17)<br/>An introduction to the PartDesign workflow: tracing a sketch, using pad, pocket, and moving the object.
PD WB Tutorial018.png|link=[[Basic Part Design Tutorial 017]]|[[Basic Part Design Tutorial]] (v0.17)<br/>Model a simple part using a feature editing methodology: creating a sketch, using pad, external references, pocket, and mirror.
+
PD WB Tutorial018.png|link=[[Basic Part Design Tutorial 017]]|[[Basic Part Design Tutorial 017|Basic Part Design Tutorial]] (v0.17)<br/>Model a simple part using a feature editing methodology: creating a sketch, using pad, external references, pocket, and mirror.
 
TBHS-model.png|link=[[Toothbrush Head Stand]]|[[Toothbrush Head Stand|Model an electric toothbrush head stand]] (v0.16)<br/>Multiple features used: sketch, distance and coincident constraints, pad, external references, fillet, chamfer, linear pattern, and draft.
 
TBHS-model.png|link=[[Toothbrush Head Stand]]|[[Toothbrush Head Stand|Model an electric toothbrush head stand]] (v0.16)<br/>Multiple features used: sketch, distance and coincident constraints, pad, external references, fillet, chamfer, linear pattern, and draft.
 
Exercise lego 01.jpg|link=[[Manual:Modeling for product design]]|[[Manual:Modeling for product design|Modeling for product design]] (v0.16)<br/>Modeling a Lego block: sketches, vertical and horizontal distance constraints, pad, pocket, external reference, linear pattern, and assembly.
 
Exercise lego 01.jpg|link=[[Manual:Modeling for product design]]|[[Manual:Modeling for product design|Modeling for product design]] (v0.16)<br/>Modeling a Lego block: sketches, vertical and horizontal distance constraints, pad, pocket, external reference, linear pattern, and assembly.
 
Exercise table complete.jpg|link=[[Manual:Traditional modeling, the CSG way]]|[[Manual:Traditional modeling, the CSG way|Traditional modeling, the CSG way]]<br/>Modeling a table by using simple solids like cubes and cylinders, and performing boolean operations (fusions and cuts) with them.
 
Exercise table complete.jpg|link=[[Manual:Traditional modeling, the CSG way]]|[[Manual:Traditional modeling, the CSG way|Traditional modeling, the CSG way]]<br/>Modeling a table by using simple solids like cubes and cylinders, and performing boolean operations (fusions and cuts) with them.
TutorialDraftShapeString_Complete.jpg|link=[[Draft ShapeString tutorial]]|[[Draft ShapeString tutorial]] (v0.16)<br/>Create engraved text on a solid: extrude a shapestring to make it solid, then use a boolean cut to carve it from another solid.
+
08_T04_Part_ShapesString_Extrude_final_cut.png|link=[[Draft ShapeString tutorial]]|[[Draft ShapeString tutorial]] (v0.19)<br/>Create engraved text on a solid: extrude a shapestring to make it solid, then use a boolean cut to carve it from another solid.
Tutorial WhiffleBall.jpg|link=[[Whiffle Ball tutorial]]|[[Whiffle Ball tutorial|Create a wiffle ball]] (v0.16)<br/>Use solid primitives, like cubes and cylinders, and boolean operations, like union and cut, to create a hollowed ball.
+
10_T03_Part_ball_fillet.png|link=[[Whiffle Ball tutorial]]|[[Whiffle Ball tutorial|Create a wiffle ball]] (v0.19)<br/>Use solid primitives, like cubes and cylinders, and boolean operations, like union and cut, to create a hollowed ball.
 
Tutorial-normand06.jpg|link=[[Basic modeling tutorial]]|[[Basic modeling tutorial]] <br/>Create an iron angle by two methods: using solid primitives, and boolean operations (CSG); and by extruding a planar profile.
 
Tutorial-normand06.jpg|link=[[Basic modeling tutorial]]|[[Basic modeling tutorial]] <br/>Create an iron angle by two methods: using solid primitives, and boolean operations (CSG); and by extruding a planar profile.
 +
File:HTCaeroplane04.png|link=[[Aeroplane]]|[[Aeroplane|Aeroplane tutorial]] <br/>Understand placements in FreeCAD by creating a simple aeroplane model. Then learn about rotation angles, yaw (Z), pitch (Y), and roll (X).
 +
File:T13_14_Threads_components.png|link=[[Thread_for_Screw_Tutorial]]|[[Thread_for_Screw_Tutorial|Thread for screw tutorial]] (v0.19)<br/>Understand how to create threads with several techniques that include use of the tools [[Part_Helix|Part Helix]], [[PartDesign_AdditivePipe|PartDesign AdditivePipe]], [[Part_Sweep|Part Sweep]], [[Part_Union|Part Union]], and [[Part_Cut|Part Cut]].
 
</translate>
 
</translate>
 
</gallery>
 
</gallery>
 
<translate>
 
<translate>
 +
 +
<!--T:30-->
 +
The Raspberry Pi project has made simple tutorials that are easy to follow, particularly for those new to CAD systems:
 +
* [https://projects.raspberrypi.org/en/projects/freecad-dice freecad-dice], model a die with six faces, and optionally 3D print it.
 +
* [https://projects.raspberrypi.org/en/projects/freecad-headphone-tidy freecad-headphone-tidy], model a spool to organize and store earphones, and optionally 3D print it.
 +
* [https://projects.raspberrypi.org/en/projects/freecad-chess-set freecad-chess-set], model and entire chess set in Bauhaus modernist style.
 +
* [https://github.com/raspberrypilearning?utf8=%E2%9C%93&q=freecad&type=source&language= raspberrypilearning] repository (CC-BY 4.0) with other examples.
  
 
==Drafting and Sketching == <!--T:7-->
 
==Drafting and Sketching == <!--T:7-->
  
 
</translate>
 
</translate>
<gallery mode=packed-overlay heights=200px style="font-size:1.1em">
+
<gallery mode=packed heights=200px style="font-size:1.1em">
 
<translate>
 
<translate>
 
<!--T:8-->
 
<!--T:8-->
Exercise cabin 01.jpg|link=[[Manual:Traditional 2D drafting]]|[[Manual:Traditional 2D drafting|Traditional 2D drafting]]
+
Exercise cabin 01.jpg|link=[[Manual:Traditional 2D drafting]]|[[Manual:Traditional 2D drafting|Traditional 2D drafting]] <br/>Draw a floor plan with lines, wires, rectangles, circular arcs, and add hatch patterns, annotations, and dimensions. Export the result to DXF.
Draft_tutorial_result.png|link=[[Draft tutorial]]|[[Draft tutorial]] <br/>Introduction to the Draft workbench
+
00_Dr01_Draft_Tutorial_final.png|link=[[Draft_tutorial]]|[[Draft tutorial]] (v0.19) <br/>This is a basic introduction to the tools of the [[Draft Workbench|Draft Workbench]]: working plane, grid, line, arc, upgrade, rectangle, circle, polygon, arrays, dimensions, annotations, and shapestring.
Sketcher tutorial result.png|Link=[[Sketcher tutorial]]|[[Sketcher tutorial]] <br/>Introduction to the Sketcher
+
Sketcher_reference.png|link=[[Sketcher reference]]|[[Sketcher_reference|Sketcher reference]] (v0.18) <br/> This is a 70-page long PDF document that serves as a detailed manual for the [[Sketcher Workbench|Sketcher Workbench]]. It explains the basics of Sketcher usage, and goes into a lot of detail about the creation of geometrical shapes, and each of the constraints.
Constrain3.png|link=[[Sketcher Micro Tutorial - Constraint Practices]]|[[Sketcher Micro Tutorial - Constraint Practices|Sketcher Micro Tutorial]] <br/>Learn to efficiently constrain a square
+
09b_Sk01_Sketcher_fully_constrained_clean.png|link=[[Basic Sketcher Tutorial]]|[[Basic Sketcher Tutorial]] (v0.19) <br/>This is a basic introduction to the tools of the Sketcher Workbench: construction mode, line, circle, arc, constraints (equality, vertical, horizontal, tangential, distance, angle, radius).
 +
03d_Sk02_Sketcher_Rectangle_constrained_length.png|link=[[Sketcher_Micro_Tutorial_-_Constraint_Practices]]|[[Sketcher_Micro_Tutorial_-_Constraint_Practices|Sketcher constraints practices]] (v0.19)<br/>Learn to efficiently constrain a sketch. Prefer geometric constraints over datum constraints.
 
</translate>
 
</translate>
 
</gallery>
 
</gallery>
 
<translate>
 
<translate>
  
 +
<!--T:32-->
 +
<gallery>
 +
 +
</gallery>
 
==Technical Drawings == <!--T:9-->
 
==Technical Drawings == <!--T:9-->
  
 
</translate>
 
</translate>
<gallery mode=packed-overlay heights=200px style="font-size:1.1em">
+
<gallery mode=packed heights=200px style="font-size:1.1em">
 
<translate>
 
<translate>
 
<!--T:10-->
 
<!--T:10-->
TDTut ProjGroup21.png|link=[[Basic TechDraw Tutorial]]|[[Basic TechDraw Tutorial|Basic TechDraw Tutorial]]<br/>Intro to creating drawings with the TechDraw workbench.
+
TDTut ProjGroup21.png|link=[[Basic TechDraw Tutorial]]|[[Basic TechDraw Tutorial|Basic TechDraw Tutorial]] (v0.17) <br/>This is the essential introduction to the tools of the TechDraw Workbench: page, view, scale, vertical and horizontal dimensions, annotations, projection groups, linking dimensions to the 3D view.
File:FCTemplateHow.png|link=[[TechDraw_TemplateHowTo]]|[[TechDraw_TemplateHowTo|Creating a new background template]]<br/>Instructions to create a new page template in Inkscape for using with the TechDraw Workbench.
+
File:FCTemplateHow.png|link=[[TechDraw_TemplateHowTo]]|[[TechDraw_TemplateHowTo|Creating a new background template]] (v0.17) <br/>Instructions to create a page template in Inkscape for using it with the TechDraw Workbench. Determine the size of the sheet, draw a frame for the page, define fixed text, and editable text fields.
 +
File:AnHi1.png|link=[[Measurement Of Angles On Holes]]|[[Measurement Of Angles On Holes|Measurement Of Angles On Holes]] (v0.19) <br/> Instructions for adding center lines and subsequent angle representations on holes.
 
</translate>
 
</translate>
 
</gallery>
 
</gallery>
Line 84: Line 103:
  
 
</translate>
 
</translate>
<gallery mode=packed-overlay heights=200px style="font-size:1.1em">
+
<gallery mode=packed heights=200px style="font-size:1.1em">
 
<translate>
 
<translate>
 
<!--T:12-->
 
<!--T:12-->
FEM example01 pic00.jpg|link=[[FEM CalculiX Cantilever 3D]]|[[FEM CalculiX Cantilever 3D|FEM Analysis example]]
+
FEM example01 pic00.jpg|link=[[FEM CalculiX Cantilever 3D]]|[[FEM CalculiX Cantilever 3D|CalculiX cantilever FEM analysis]] (v0.17) <br/>This in an example included in every installation of FreeCAD; it demonstrates a basic analysis with the CalculiX FE solver. Purge the current result, re-run the solver, and view the displacements and stresses in the deformed mesh in the viewport.
Figure 11 Deformed Mesh.png|link=[[FEM Shear of a Composite Block]]|[[FEM Shear of a Composite Block]]
+
FEM tutorial result.png|link=[[FEM tutorial]]|[[FEM tutorial|Simple FEM introduction]] (v0.17) <br/>This is a short introduction to the steps required to perform an analysis in the FEM Workbench: model your object, create a mesh, add constraints and forces, add a material, run the solver, and visualize the results.
FEM tutorial result.png|link=[[FEM tutorial]]|[[FEM tutorial]] <br/>Introduction to the FEM workbench.
+
Figure 11 Deformed Mesh.png|link=[[FEM Shear of a Composite Block]]|[[FEM Shear of a Composite Block|FEM shear analysis of a composite block]] (v0.17) <br/>Study the deformation of a block made of a hard nucleus surrounded by a softer material: create mesh regions, add materials, set up sliding constraints, add shear loads, run the solver, and visualize the results with a clip plane.
 +
Femconcrete_Wall_3D_rx_PSS.png|link=[[Analysis_of_reinforced_concrete_with_FEM]]|[[Analysis_of_reinforced_concrete_with_FEM|Analysis of reinforced concrete with FEM]] (v0.19) <br/>Estimate the level of reinforcement required in a concrete structure to prevent brittle failure under tension or shear.
 +
FEM_post-processing_Paraview.png|link=[[Post-Processing_of_FEM_Results_with_Paraview]]|[[Post-Processing_of_FEM_Results_with_Paraview|Post-Processing of FEM results with Paraview]] (v0.19)<br/>This tutorial explains the basics of transferring data from the FEM Workbench to Paraview and shows some of the options and settings for displaying data.
 
</translate>
 
</translate>
 
</gallery>
 
</gallery>
Line 97: Line 118:
  
 
</translate>
 
</translate>
<gallery mode=packed-overlay heights=200px style="font-size:1.1em">
+
<gallery mode=packed heights=200px style="font-size:1.1em">
 
<translate>
 
<translate>
 
<!--T:14-->
 
<!--T:14-->
Path-WalkThroughResult.gif|link=[[Path Walkthrough for the Impatient]]|[[Path Walkthrough for the Impatient]] <br/>Quick presentation of the Path module.
+
Path-WalkThroughResult.gif|link=[[Path Walkthrough for the Impatient]]|[[Path Walkthrough for the Impatient|Path Workbench for the impatient]] <br/>This is a quick presentation of the workflow for the Path Workbench: create a job, define the output, define the milling tool, define the path operations, start the simulation, and generate a G-code output file.
Exercise meshing 03.jpg|link=[[Manual:Preparing models for 3D printing]]|[[Manual:Preparing models for 3D printing|Preparing models for 3D printing]]
+
Exercise meshing 03.jpg|link=[[Manual:Preparing models for 3D printing]]|[[Manual:Preparing models for 3D printing|Preparing models for 3D printing]] (v0.16)<br/>Convert a solid object to a mesh object using the Mesh Workbench, export the mesh to STL format, and use Slic3r to prepare the G-code. Alternatively use the Cura Workbench or the Path Workbench to generate the G-code.
 
</translate>
 
</translate>
 
</gallery>
 
</gallery>
Line 109: Line 130:
  
 
</translate>
 
</translate>
<gallery mode=packed-overlay heights=200px style="font-size:1.1em">
+
<gallery mode=packed heights=200px style="font-size:1.1em">
 
<translate>
 
<translate>
 
<!--T:16-->
 
<!--T:16-->
Dxf Importer Install 11.png|link=[[Dxf Importer Install]]|[[Dxf Importer Install]] <br/>Manual install of the DXF import library.
+
Dxf Importer Install 11.png|link=[[Dxf Importer Install]]|[[Dxf Importer Install|DXF importer installation]] <br/>Install the DXF importer program in you system, so that you can open DXF and DWG files with FreeCAD.
 
</translate>
 
</translate>
 
</gallery>
 
</gallery>
Line 120: Line 141:
  
 
</translate>
 
</translate>
<gallery mode=packed-overlay heights=200px style="font-size:1.1em">
+
<gallery mode=packed heights=200px style="font-size:1.1em">
 
<translate>
 
<translate>
 
<!--T:18-->
 
<!--T:18-->
Exercise raytracing 05.jpg|link=[[Manual:Creating renderings]]|[[Manual:Creating renderings|Creating renderings]] <br/>With POV-Ray and LuxRender.
+
Exercise raytracing 05.jpg|link=[[Manual:Creating renderings]]|[[Manual:Creating renderings|Creating renderings]] <br/>Quickly produce a rendered image of your bodies with POV-Ray and LuxRender, if they are installed in your system.
Raytracing tutorial result.png|link=[[Raytracing tutorial]]|[[Raytracing tutorial]] <br/>Introduces the basic workflow of the Raytracing workbench.
+
Raytracing tutorial result.png|link=[[Raytracing tutorial]]|[[Raytracing tutorial]] (v0.16) <br/>Describes the basic workflow of the Raytracing Workbench using POV-Ray or LuxRender: set the path to the renderers, create a project, set the camera position, select the model, run the renderer.
Povray_before_after.png|link=[http://forum.freecadweb.org/viewtopic.php?f=36&t=32745]|[https://forum.freecadweb.org/viewtopic.php?f=36&t=32745 FreeCAD / pov ray tutorial]<br/>Step by step workflow for using Pov Ray to render an image with the Raytracing workbench.
+
12_T04_FreeCAD_POVray_render_floor_wood_walls_radiosity_final.png|link=[[Tutorial FreeCAD POV ray]]|[[Tutorial FreeCAD POV ray|Intermediate FreeCAD and POV-ray tutorial]] (v0.18) <br/>Workflow to produce a better render with POV-Ray: create a project, add objects, set the camera, save the .pov file, manually edit the file to improve the textures, planes, lights, and then run the renderer.
 +
07_T03_FreeCAD_Blender_EEVEE_render.png|link=[[Tutorial_Render_with_Blender]]|[[Tutorial Render with Blender|Rendering a FreeCAD assembly with Blender]] (v0.18) <br/>Export bodies from FreeCAD to Wavefront .obj, import the file into Blender, set up a simple Sun light, assign basic materials with the Principled BSDF shader, and produce a rendered image with EEVEE and Cycles.
 
</translate>
 
</translate>
 
</gallery>
 
</gallery>
Line 133: Line 155:
  
 
</translate>
 
</translate>
<gallery mode=packed-overlay heights=200px style="font-size:1.1em">
+
<gallery mode=packed heights=200px style="font-size:1.1em">
 
<translate>
 
<translate>
 
<!--T:20-->
 
<!--T:20-->
Robot Tutorial RobotSimulation.gif|link=[[Robot tutorial]]|[[Robot tutorial]] <br/>Robot movement simulation.
+
Robot Tutorial RobotSimulation.gif|link=[[Robot tutorial]]|[[Robot tutorial]] (v0.17) <br/>Simulate the movement of an industrial robot: set up a trajectory, set up home position, change the robot position, insert various waypoints, and simulate the robot movement.
 
</translate>
 
</translate>
 
</gallery>
 
</gallery>
Line 143: Line 165:
 
== Plotting == <!--T:28-->
 
== Plotting == <!--T:28-->
 
</translate>
 
</translate>
<gallery mode=packed-overlay heights=200px style="font-size:1.1em">
+
<gallery mode=packed heights=200px style="font-size:1.1em">
 
<translate>
 
<translate>
 
<!--T:29-->
 
<!--T:29-->
Plot_Trigonometric_Example.png|link=[[Plot Basic tutorial]]|[[Plot Basic tutorial]]<br/>The basic tutorial to drawing mathematical plots in FreeCAD.
+
Plot_Trigonometric_Example.png|link=[[Plot Basic tutorial]]|[[Plot Basic tutorial|Basic plot]] <br/>Draw simple mathematical functions in the Plot Workbench using the underlying Python plotting libraries: define the input list (X), two output lists (Y1, Y2), plot the functions (Y1 and Y2 against X), set the grid, line styles, legends, axes labels, plot title, and save the plot.
Plot_MultiAxes_Example.png|link=[[Plot MultiAxes tutorial]]|[[Plot MultiAxes tutorial]]<br/>Draw several axes and several plots in the same figure.
+
Plot_MultiAxes_Example.png|link=[[Plot MultiAxes tutorial]]|[[Plot MultiAxes tutorial|Multiaxes plot]] <br/>Draw a more complicated plot in the Plot Workbench with two different input lists (X, T), and three output lists (Y1, Y2, Y3), then create two sets of axes in the same plot, and plot the pairs of lists (Y1 against X, and Y2 and Y3 against T); set the axes labels and grid, and move the legends and title.
 
</translate>
 
</translate>
 
</gallery>
 
</gallery>
 
<translate>
 
<translate>
 +
 +
== Scripting == <!--T:107-->
 +
 +
<!--T:108-->
 +
These are tutorials that are related to scripting or programming. They are geared towards more experienced users, who are already somewhat familiar with the program.
 +
* [[Python_scripting_tutorial|Python scripting tutorial]]
 +
* [[How_to_install_macros|How to install macros]]
 +
* [[How_to_install_additional_workbenches|How to install additional workbenches]]
  
 
== Drawings == <!--T:26-->
 
== Drawings == <!--T:26-->
 
{{VeryImportantMessage|Development of the [[Drawing Workbench]] stopped in FreeCAD 0.16. Consider using the [[TechDraw Workbench]] instead.}}
 
{{VeryImportantMessage|Development of the [[Drawing Workbench]] stopped in FreeCAD 0.16. Consider using the [[TechDraw Workbench]] instead.}}
 
</translate>
 
</translate>
<gallery mode=packed-overlay heights=200px style="font-size:1.1em">
+
<gallery mode=packed heights=200px style="font-size:1.1em">
 
<translate>
 
<translate>
 
<!--T:27-->
 
<!--T:27-->
Drawing_tutorial_result.png|link=[[Drawing tutorial]]|[[Drawing tutorial]] <br/>Intro to creating blueprints with the Drawing workbench.
+
Drawing_tutorial_result.png|link=[[Drawing tutorial]]|[[<tvar|VE>Special:MyLanguage/Drawing tutorial</>|Drawing tutorial]] (v0.16)<br/>This is the essential introduction to the tools of the Drawing Workbench to create blueprints.
Exercise drawing 01.jpg|link=[[Manual:Generating 2D drawings]]|[[Manual:Generating 2D drawings|Generating 2D drawings]]
+
Exercise drawing 01.jpg|link=[[Manual:Generating 2D drawings]]|[[Manual:Generating 2D drawings|Generating 2D drawings]] (v0.16)<br/>Generate 2D projections of your 3D models, and add dimensions.
 
</translate>
 
</translate>
 
</gallery>
 
</gallery>
 
<translate>
 
<translate>
 +
 +
== Tutorials - Comprehensive list == <!--T:33-->
 +
Here are listed all the tutorials that are not in the manual '''regardless of their quality'''. If a tutorial is listed in the [[:Category:Tutorials]] and not in this table please insert it.
 +
 +
<!--T:34-->
 +
{| class="wikitable sortable"
 +
|-
 +
! Tutorial
 +
! Topic
 +
! Level
 +
! Time to complete hh:mm
 +
! Authors
 +
! FreeCAD version
 +
! Example files
 +
! UnfinishedDocu
 +
 +
<!--T:35-->
 +
<!-- Template for new entries
 +
|-
 +
| [[Tutorial]]
 +
| Topic
 +
| Level
 +
| 0:00
 +
| [[User:Name | Name]]
 +
| 1.0
 +
| None
 +
| No
 +
-->
 +
 +
<!--T:36-->
 +
|-
 +
| [[Add FEM Constraint Tutorial]]
 +
|
 +
|
 +
|
 +
| [[User:M42kus | M42kus]]
 +
|
 +
|
 +
| No
 +
 +
<!--T:37-->
 +
|-
 +
| [[Add FEM Equation Tutorial]]
 +
|
 +
|
 +
|
 +
| [[User:M42kus | M42kus]]
 +
|
 +
|
 +
| No
 +
 +
<!--T:38-->
 +
|-
 +
| [[Aeroplane]]
 +
| Part Workbench
 +
| Beginner
 +
| 0:10
 +
| Hughthecat
 +
|
 +
|
 +
| No
 +
 +
<!--T:39-->
 +
|-
 +
| [[Analysis of reinforced concrete with FEM]]
 +
| Reinforced concrete with FEM
 +
| Intermediate
 +
| 1:00
 +
| [[User:HarryvL | HarryvL]]
 +
| 0.19 or above
 +
|
 +
| No
 +
 +
<!--T:40-->
 +
|-
 +
| [[Arch panel tutorial]]
 +
| Modeling an architectural panel
 +
| Beginner
 +
| 1:00
 +
| Yorik
 +
|
 +
|
 +
| No
 +
 +
<!--T:41-->
 +
|-
 +
| [[Arch tutorial]]
 +
| Modeling
 +
| Intermediate
 +
|
 +
| [[User:Yorik | Yorik]]
 +
| 0.14
 +
|
 +
| No
 +
 +
<!--T:42-->
 +
|-
 +
| [[Basic modeling tutorial]]
 +
| Introduction to modelling
 +
| Beginner
 +
| 0:15
 +
| [[User:NormandC | NormandC]]
 +
| Any
 +
| None
 +
| No
 +
 +
<!--T:43-->
 +
|-
 +
| [[Basic Part Design Tutorial | Basic Part Design Tutorial (0.16 and below)]]
 +
| Modeling
 +
| Beginner
 +
|
 +
| [[User:Quick61 | Mark Stephen (Quick61)]]
 +
| 0.14.3700 to 0.16
 +
| None
 +
| No
 +
 +
<!--T:44-->
 +
|-
 +
| [[Basic_Part_Design_Tutorial_017 | Basic Part Design Tutorial (0.17 and above)]]
 +
| Modeling
 +
| Beginner
 +
|
 +
| [[User:HarryGeier | HarryGeier]]
 +
| 0.17 or above
 +
| [https://github.com/FreeCAD/Examples/blob/master/Basic_Part_Design_Tutorial_Example_017_Files/Basic_Part_Design_Tutorial_017.fcstd Basic Part Design for v0.17]
 +
| No
 +
 +
<!--T:45-->
 +
|-
 +
| [[Basic Sketcher Tutorial]]
 +
| Sketcher
 +
| Beginner
 +
| 1:00
 +
| [[User:Drei | Drei]] and [[User:Vocx | Vocx]]
 +
| 0.19
 +
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=43594 Basic Sketcher tutorial ]
 +
| No
 +
 +
<!--T:46-->
 +
|-
 +
| [[Basic TechDraw Tutorial]]
 +
| Modeling
 +
| Beginner
 +
 +
| [[User:WandererFan | WandererFan]]
 +
| 0.17 and above
 +
| [https://github.com/FreeCAD/Examples/blob/master/Basic_Part_Design_Tutorial_Example_017_Files/Basic_Part_Design_Tutorial_017.fcstd Basic Part Design for v0.17 Sample] [https://github.com/FreeCAD/Examples/blob/master/Basic_TechDraw_Tutorial_Example_Files/Basic_TechDraw_Tutorial.fcstd Basic TechDraw Tutorial Sample]
 +
| No
 +
 +
<!--T:47-->
 +
|-
 +
| [[Code snippets]]
 +
| Python
 +
| Beginner
 +
 +
 +
 +
 +
| No
 +
 +
<!--T:48-->
 +
|-
 +
| [[Creating a simple part with PartDesign]]
 +
| Modeling
 +
| Beginner
 +
| 1:00
 +
| GlouGlou
 +
| 0.17 or above
 +
| [https://github.com/FreeCAD/Examples/blob/master/Creating_a_simple_PartDesign_Body.FCStd Creating a simple PartDesign Body.FCStd]
 +
| No
 +
 +
<!--T:49-->
 +
|-
 +
| [[Customize Toolbars]]
 +
|
 +
| Beginner
 +
| 0:05
 +
| [[User:Mario52 | Mario52]]
 +
| Any
 +
| None
 +
| No
 +
 +
<!--T:50-->
 +
|-
 +
| [[Draft ShapeString tutorial]]
 +
| Product Design
 +
| Beginner
 +
| 0:30
 +
| r-frank and vocx
 +
| 0.17 and above
 +
| [https://github.com/FreeCAD/Examples/blob/master/Draft_Shapestring_Tutorial_Examples/Draft_Shapestring_Tutorial_Text.FCStd?raw=true Draft_Shapestring_Text]
 +
| No
 +
 +
<!--T:51-->
 +
|-
 +
| [[Draft tutorial]]
 +
| Drafting
 +
| Beginner
 +
| 0:30
 +
| [[User:Drei | Drei]] and vocx
 +
| 0.19
 +
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=43651 Draft tutorial updated]
 +
| No
 +
 +
<!--T:52-->
 +
|-
 +
| [[Draft tutorial Outdated]]
 +
| Drafting
 +
| Beginner
 +
|
 +
|
 +
|
 +
|
 +
|
 +
 +
<!--T:53-->
 +
|-
 +
| [[Drawing Template HowTo]]
 +
| 2D Drafting
 +
| Intermediate
 +
| 1:00
 +
| [[User:Quick61 | Mark Stephen (Quick61)]]
 +
| 0.14.3700 or greater or above
 +
| None
 +
| No
 +
 +
<!--T:54-->
 +
|-
 +
| [[Drawing tutorial | Drawing tutorial (obsolete)]]
 +
| Blueprints / Drawings
 +
| Beginner
 +
| 0:15
 +
| [[User:Drei | Drei]]
 +
| 0.16 or above
 +
|
 +
| No
 +
 +
<!--T:55-->
 +
|-
 +
| [[Dxf Importer Install]]
 +
|
 +
| Intermediate
 +
| 0:05
 +
| [[User:Mario52 | Mario52]]
 +
| Any
 +
| None
 +
| No
 +
 +
<!--T:56-->
 +
|-
 +
| [[Engine Block Tutorial]]
 +
| Part Workbench
 +
| Beginner
 +
| 1:00
 +
| Andrewbuck40
 +
| 0.14.3700
 +
|
 +
| Yes
 +
 +
<!--T:57-->
 +
|-
 +
| [[Export to STL or OBJ]]
 +
| Export to STL or OBJ
 +
| Beginner
 +
| 0:20
 +
| r-frank
 +
| 0.16.6703
 +
|
 +
| No
 +
 +
<!--T:58-->
 +
|-
 +
| [[Extend FEM Module]]
 +
|
 +
|
 +
|
 +
| [[User:M42kus | M42kus]]
 +
|
 +
|
 +
| No
 +
 +
<!--T:59-->
 +
|-
 +
| [[FEM Beginner tutorial]]
 +
| FEM Beginner tutorial
 +
| Beginner
 +
 +
| thschrader
 +
| 0.17.11622+
 +
| [https://github.com/FreeCAD/Examples/blob/master/Whiffle_Ball_Tutorial_ExampleFiles/WhiffleBall_Tutorial_FCWiki.FCStd?raw=true Whiffle Ball]
 +
| Yes
 +
 +
<!--T:60-->
 +
|-
 +
| [[FEM CalculiX Cantilever 3D]]
 +
| Finite Element Analysis
 +
| Beginner
 +
| 0:10
 +
| [[User:Bernd | Bernd]]
 +
| 0.16.6377 or above
 +
|
 +
| No
 +
 +
<!--T:61-->
 +
|-
 +
| [[FEM Shear of a Composite Block]]
 +
| Finite Element Analysis
 +
| Beginner/Intermediate
 +
| 0:300
 +
| [[User:HarryvL | HarryvL]]
 +
| 0.17.12960 or above
 +
|
 +
| No
 +
 +
<!--T:62-->
 +
|-
 +
| [[FEM tutorial]]
 +
| Finite Element Analysis
 +
| Beginner
 +
| 0:10
 +
| [[User:Drei | Drei]]
 +
| 0.16.6700 or above
 +
|
 +
| No
 +
 +
<!--T:63-->
 +
|-
 +
| [[FEM Tutorial Python]]
 +
| Finite Element Analysis
 +
| Intermediate
 +
| 0:30
 +
| [[User:Bernd | Bernd]]
 +
| 0.18.15985 or above
 +
 +
| No
 +
 +
<!--T:64-->
 +
|-
 +
| [[FreeCAD-Ship s60 tutorial]]
 +
| Ship Workbench
 +
| Beginner
 +
 +
 +
 +
 +
| No
 +
 +
<!--T:65-->
 +
|-
 +
| [[FreeCAD-Ship s60 tutorial (II)]]
 +
| Ship Workbench
 +
| Beginner
 +
 +
 +
 +
 +
| No
 +
 +
<!--T:66-->
 +
|-
 +
| [[How to install additional workbenches]]
 +
| Programming
 +
| Medium programmer
 +
| 0:15
 +
| [[User:R-frank | r-frank]]
 +
| Any
 +
| None
 +
| No
 +
 +
<!--T:67-->
 +
|-
 +
| [[How to install macros]]
 +
| Programming
 +
| Medium programmer
 +
| 0:15
 +
| [[User:Mario52 | Mario52]]
 +
| Any
 +
| None
 +
| No
 +
 +
<!--T:68-->
 +
|-
 +
| [[Import from STL or OBJ]]
 +
| Import from STL or OBJ
 +
| Beginner
 +
| 0:30
 +
| r-frank
 +
| 1.0
 +
| 0.16.6703
 +
| No
 +
 +
<!--T:69-->
 +
|-
 +
| [[Import OpenSCAD code]]
 +
| Import OpenSCAD code
 +
| Beginner
 +
| 0:30
 +
| r-frank
 +
| 0.16.6704
 +
| None
 +
| No
 +
 +
<!--T:70-->
 +
|-
 +
| [[Import text and geometry from Inkscape]]
 +
| Import text and geometry from Inkscape
 +
| Beginner
 +
| 0:30
 +
| r-frank
 +
| 0.16.6704
 +
|
 +
| No
 +
 +
<!--T:71-->
 +
|-
 +
| [[Import/Export IFC - compiling IfcOpenShell]]
 +
| Arch Workbench
 +
| Advanced
 +
| 2:00
 +
| Pablo Gil
 +
|
 +
|
 +
| No
 +
 +
<!--T:72-->
 +
|-
 +
| [[PartDesign tutorial]]
 +
| Sketcher
 +
| Beginner
 +
| 0:15
 +
| [[User:Drei | Drei]]
 +
| 0.16 or above
 +
 +
| No
 +
 +
<!--T:73-->
 +
|-
 +
| [[Path Core Concepts]]
 +
| Path Workbench
 +
 +
 +
 +
|
 +
 +
| Yes
 +
 +
<!--T:74-->
 +
|-
 +
| [[Path Customization]]
 +
| Path Workbench
 +
|
 +
|
 +
|
 +
|
 +
|
 +
| Yes
 +
 +
<!--T:75-->
 +
|-
 +
| [[Path Postprocessor Customization]]
 +
| Path Workbench
 +
 +
 +
| chrisb
 +
 +
 +
| No
 +
 +
<!--T:76-->
 +
|-
 +
| [[Path scripting]]
 +
| Path Workbench
 +
| Intermediate
 +
 +
 +
 +
 +
| No
 +
 +
<!--T:77-->
 +
|-
 +
| [[Path Walkthrough for the Impatient]]
 +
| Path Workbench
 +
|
 +
|
 +
| Chrisb
 +
|
 +
|
 +
| Yes
 +
 +
<!--T:78-->
 +
|-
 +
| [[Plot Basic tutorial]]
 +
| Plot Workbench Basic Tutorial
 +
| Beginner
 +
|
 +
|
 +
|
 +
|
 +
| No
 +
 +
<!--T:79-->
 +
|-
 +
| [[Plot MultiAxes tutorial]]
 +
| Plot workbench
 +
| Intermediate
 +
 +
 +
 +
|
 +
| No
 +
 +
<!--T:80-->
 +
|-
 +
| [[Post-Processing of FEM Results with Paraview]]
 +
| Post-Processing of FEM Results with ParaView
 +
| Intermediate
 +
| 2:00
 +
| [[User:HarryvL | HarryvL]]
 +
| 0.19
 +
| [https://forum.freecadweb.org/download/file.php?id=103403 [https://forum.freecadweb.org/download/file.php?id=103557 Beam]] and wall
 +
| No
 +
 +
<!--T:81-->
 +
|-
 +
| [[Python scripting tutorial]]
 +
| Programming
 +
| Intermediate
 +
|
 +
|
 +
|
 +
|
 +
| No
 +
 +
<!--T:82-->
 +
|-
 +
| [[Raytracing tutorial]]
 +
| Raytracing
 +
| Beginner
 +
| 0:010
 +
| [[User:Drei | Drei]]
 +
| 0.16 or above
 +
|
 +
| No
 +
 +
<!--T:83-->
 +
|-
 +
| [[Robot 6-Axis]]
 +
| Robot Workbench
 +
| Intermediate
 +
 +
|
 +
|
 +
|
 +
| No
 +
 +
<!--T:84-->
 +
|-
 +
| [[Robot tutorial]]
 +
| Robot Workbench
 +
| Beginner
 +
|
 +
| r-frank
 +
|
 +
|
 +
| No
 +
 +
<!--T:85-->
 +
|-
 +
| [[Scripted Parts: Ball Bearing - Part 1]]
 +
| Part Scripting - Ball Bearing #1
 +
| Beginner
 +
| 0:30
 +
| r-frank
 +
| 0.16.6706
 +
 +
| No
 +
 +
<!--T:86-->
 +
|-
 +
| [[Scripted Parts: Ball Bearing - Part 2]]
 +
| Part Scripting - Ball Bearing #2
 +
| Beginner
 +
| 0:30
 +
| r-frank
 +
| 0.16.6706
 +
 +
| No
 +
 +
 +
<!--T:109-->
 +
|-
 +
| [[PartDesign Bearingholder Tutorial I]]
 +
| Product design - Bearingholder #1
 +
| Beginner
 +
| 60 minutes
 +
| NormandC
 +
 +
 +
| No
 +
 +
 +
<!--T:110-->
 +
|-
 +
| [[PartDesign Bearingholder Tutorial II]]
 +
| Product design - Bearingholder #2
 +
| Beginner
 +
| 60 minutes
 +
| NormandC
 +
 +
 +
| No
 +
 +
 +
 +
<!--T:87-->
 +
|-
 +
| [[Scripts]]
 +
| Scripting
 +
| Beginner
 +
|
 +
| onekk Carlo
 +
| 0.19
 +
|
 +
| No
 +
 +
<!--T:88-->
 +
|-
 +
| [[Simple Box Cover]]
 +
| Modeling
 +
| Beginner
 +
| 0:20
 +
| Normand C
 +
| 0.14.3700
 +
 +
| Yes
 +
 +
<!--T:89-->
 +
|-
 +
| [[Sketcher Micro Tutorial - Constraint Practices]]
 +
| Sketcher
 +
| Beginner
 +
| 0:30
 +
| Mark Stephen (Quick61) and vocx
 +
| 0.19
 +
| [https://forum.freecadweb.org/viewtopic.php?f=36&p=371659#p371659 Sketcher Constraints practices]
 +
| No
 +
 +
<!--T:90-->
 +
|-
 +
| [[Sketcher reference]]
 +
 +
 +
|
 +
|
 +
 +
|
 +
| No
 +
 +
<!--T:91-->
 +
|-
 +
| [[Sketcher requirement for a sketch]]
 +
| Sketcher
 +
| Beginner
 +
 +
| [[User:Maker | Maker]]
 +
|
 +
| None
 +
| No
 +
 +
<!--T:92-->
 +
|-
 +
| [[Sketcher Tutorial]]
 +
| Sketcher
 +
| Beginner
 +
|
 +
| Ulrich
 +
|
 +
|
 +
| No
 +
 +
<!--T:93-->
 +
|-
 +
| [[TechDraw TemplateHowTo]]
 +
| Drafting
 +
| Intermediate
 +
| 1:00
 +
| wandererfan
 +
| 0.17
 +
| None
 +
| No
 +
 +
<!--T:94-->
 +
|-
 +
| [[Thread for Screw Tutorial]]
 +
| Product design
 +
| Advanced
 +
| 1:00
 +
| [[User:DeepSOIC | DeepSOIC]], [[User:Murdic | Murdic]], vocx
 +
| 0.19
 +
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=44668 Updated: Thread for screw tutorial]
 +
| No
 +
 +
<!--T:95-->
 +
|-
 +
| [[Toothbrush Head Stand]]
 +
| Modeling
 +
| Beginner
 +
| 1:00
 +
| [[User:EmmanuelG | EmmanuelG]]
 +
| 0.16 or greater
 +
| [https://www.thingiverse.com/thing:2403310 Thingiverse 2403310]
 +
| No
 +
 +
<!--T:96-->
 +
|-
 +
| [[Topological data scripting]]
 +
| Programming
 +
| Intermediate
 +
|
 +
|
 +
|
 +
|
 +
| No
 +
 +
<!--T:97-->
 +
|-
 +
| [[Transient FEM analysis]]
 +
| Transient FEM analysis
 +
|
 +
|
 +
|
 +
|
 +
|
 +
| Yes
 +
 +
<!--T:98-->
 +
|-
 +
| [[Tutorial custom placing of windows and doors]]
 +
| Architecture
 +
| Intermediate
 +
| 1:00
 +
| [[User:Vocx | Vocx]]
 +
| 0.18 or above
 +
| None
 +
| No
 +
 +
<!--T:99-->
 +
|-
 +
| [[Tutorial for open windows]]
 +
| Architecture
 +
| Beginner
 +
| 1:00
 +
| [[User:Vocx | Vocx]]
 +
| 0.18 or above
 +
| None
 +
| No
 +
 +
<!--T:100-->
 +
|-
 +
| [[Tutorial FreeCAD POV ray]]
 +
| Rendering
 +
| Intermediate
 +
| 2:00
 +
| [[User:Vocx | Vocx]]
 +
| 0.18 or above
 +
| None
 +
| No
 +
 +
<!--T:101-->
 +
|-
 +
| [[Tutorial Render with Blender]]
 +
| Rendering
 +
| Intermediate
 +
| 1:00
 +
| [[User:Vocx | Vocx]]
 +
| 0.18 or above
 +
| None
 +
| No
 +
 +
<!--T:102-->
 +
|-
 +
| [[VRML Preparation for Robot Simulation]]
 +
| Robot Workbench
 +
| Intermediate
 +
|
 +
|
 +
| 0.11.4252ppa1
 +
|
 +
| No
 +
 +
<!--T:103-->
 +
|-
 +
| [[Washers]]
 +
 +
 +
 +
 +
 +
| None
 +
| Yes
 +
 +
<!--T:104-->
 +
|-
 +
| [[Whiffle Ball tutorial]]
 +
| Product design
 +
| Beginner
 +
| 0:30
 +
| r-frank and vocx
 +
| 0.17 and above
 +
| [https://github.com/FreeCAD/Examples/blob/master/Whiffle_Ball_Tutorial_ExampleFiles/WhiffleBall_Tutorial_FCWiki.FCStd?raw=true WhiffleBall_Tutorial_FCWiki.FCStd]
 +
| No
 +
 +
<!--T:105-->
 +
|-
 +
| [[Wikihouse porting tutorial]]
 +
| Wikihouse porting tutorial
 +
| Intermediate/Advanced
 +
| 1:00
 +
|
 +
|
 +
|
 +
| No
 +
 +
<!--T:106-->
 +
|}
 +
  
 
<!--T:21-->
 
<!--T:21-->
 
{{docnav|List of Commands|Interface Customization}}
 
{{docnav|List of Commands|Interface Customization}}
  
<!--T:22-->
 
[[Category:Tutorials]] 
 
[[Category:User Documentation]] 
 
 
</translate>
 
</translate>
 +
{{Userdocnavi{{#translation:}}}}
 +
[[Category:Tutorials{{#translation:}}]]

Latest revision as of 20:12, 23 September 2020

Other languages:
Bahasa Indonesia • ‎Deutsch • ‎English • ‎Türkçe • ‎español • ‎français • ‎hrvatski • ‎italiano • ‎polski • ‎português do Brasil • ‎română • ‎svenska • ‎čeština • ‎български • ‎русский • ‎українська • ‎中文 • ‎中文(中国大陆)‎ • ‎中文(台灣)‎ • ‎한국어

This page presents a selection of high quality written tutorials. A complete, unsorted list of tutorials can be found in Category:Tutorials, a complete and sortable one can be found in the table below.

Also visit video tutorials and offsite tutorials for tutorials hosted on external sites. A useful source of video tutorials is YouTube.

If you'd like to contribute with writing wiki documentation and tutorials, see the general wiki guidelines in WikiPages, and read the tutorial guidelines.

Please notice the version of FreeCAD used in the tutorial as some tutorials may use an old version of the program. Although the general modelling process may still work, some tools may have changed.

Architecture and BIM

Modeling parts

FreeCAD provides two main workflows to modeling parts:

Please note that the PartDesign Workbench workflow was considerably changed from FreeCAD 0.17 onward; some of the tutorials haven't been updated and may refer to the 0.16 version.

The Raspberry Pi project has made simple tutorials that are easy to follow, particularly for those new to CAD systems:

Drafting and Sketching

Technical Drawings

FEM

CNC & 3D Printing

Import and Export

Rendering

Robot workbench

Plotting

Scripting

These are tutorials that are related to scripting or programming. They are geared towards more experienced users, who are already somewhat familiar with the program.

Drawings

Development of the Drawing Workbench stopped in FreeCAD 0.16. Consider using the TechDraw Workbench instead.

Tutorials - Comprehensive list

Here are listed all the tutorials that are not in the manual regardless of their quality. If a tutorial is listed in the Category:Tutorials and not in this table please insert it.

Tutorial Topic Level Time to complete hh:mm Authors FreeCAD version Example files UnfinishedDocu


Add FEM Constraint Tutorial M42kus No
Add FEM Equation Tutorial M42kus No
Aeroplane Part Workbench Beginner 0:10 Hughthecat No
Analysis of reinforced concrete with FEM Reinforced concrete with FEM Intermediate 1:00 HarryvL 0.19 or above No
Arch panel tutorial Modeling an architectural panel Beginner 1:00 Yorik No
Arch tutorial Modeling Intermediate Yorik 0.14 No
Basic modeling tutorial Introduction to modelling Beginner 0:15 NormandC Any None No
Basic Part Design Tutorial (0.16 and below) Modeling Beginner Mark Stephen (Quick61) 0.14.3700 to 0.16 None No
Basic Part Design Tutorial (0.17 and above) Modeling Beginner HarryGeier 0.17 or above Basic Part Design for v0.17 No
Basic Sketcher Tutorial Sketcher Beginner 1:00 Drei and Vocx 0.19 Basic Sketcher tutorial No
Basic TechDraw Tutorial Modeling Beginner WandererFan 0.17 and above Basic Part Design for v0.17 Sample Basic TechDraw Tutorial Sample No
Code snippets Python Beginner No
Creating a simple part with PartDesign Modeling Beginner 1:00 GlouGlou 0.17 or above Creating a simple PartDesign Body.FCStd No
Customize Toolbars Beginner 0:05 Mario52 Any None No
Draft ShapeString tutorial Product Design Beginner 0:30 r-frank and vocx 0.17 and above Draft_Shapestring_Text No
Draft tutorial Drafting Beginner 0:30 Drei and vocx 0.19 Draft tutorial updated No
Draft tutorial Outdated Drafting Beginner
Drawing Template HowTo 2D Drafting Intermediate 1:00 Mark Stephen (Quick61) 0.14.3700 or greater or above None No
Drawing tutorial (obsolete) Blueprints / Drawings Beginner 0:15 Drei 0.16 or above No
Dxf Importer Install Intermediate 0:05 Mario52 Any None No
Engine Block Tutorial Part Workbench Beginner 1:00 Andrewbuck40 0.14.3700 Yes
Export to STL or OBJ Export to STL or OBJ Beginner 0:20 r-frank 0.16.6703 No
Extend FEM Module M42kus No
FEM Beginner tutorial FEM Beginner tutorial Beginner thschrader 0.17.11622+ Whiffle Ball Yes
FEM CalculiX Cantilever 3D Finite Element Analysis Beginner 0:10 Bernd 0.16.6377 or above No
FEM Shear of a Composite Block Finite Element Analysis Beginner/Intermediate 0:300 HarryvL 0.17.12960 or above No
FEM tutorial Finite Element Analysis Beginner 0:10 Drei 0.16.6700 or above No
FEM Tutorial Python Finite Element Analysis Intermediate 0:30 Bernd 0.18.15985 or above No
FreeCAD-Ship s60 tutorial Ship Workbench Beginner No
FreeCAD-Ship s60 tutorial (II) Ship Workbench Beginner No
How to install additional workbenches Programming Medium programmer 0:15 r-frank Any None No
How to install macros Programming Medium programmer 0:15 Mario52 Any None No
Import from STL or OBJ Import from STL or OBJ Beginner 0:30 r-frank 1.0 0.16.6703 No
Import OpenSCAD code Import OpenSCAD code Beginner 0:30 r-frank 0.16.6704 None No
Import text and geometry from Inkscape Import text and geometry from Inkscape Beginner 0:30 r-frank 0.16.6704 No
Import/Export IFC - compiling IfcOpenShell Arch Workbench Advanced 2:00 Pablo Gil No
PartDesign tutorial Sketcher Beginner 0:15 Drei 0.16 or above No
Path Core Concepts Path Workbench Yes
Path Customization Path Workbench Yes
Path Postprocessor Customization Path Workbench chrisb No
Path scripting Path Workbench Intermediate No
Path Walkthrough for the Impatient Path Workbench Chrisb Yes
Plot Basic tutorial Plot Workbench Basic Tutorial Beginner No
Plot MultiAxes tutorial Plot workbench Intermediate No
Post-Processing of FEM Results with Paraview Post-Processing of FEM Results with ParaView Intermediate 2:00 HarryvL 0.19 [https://forum.freecadweb.org/download/file.php?id=103557 Beam] and wall No
Python scripting tutorial Programming Intermediate No
Raytracing tutorial Raytracing Beginner 0:010 Drei 0.16 or above No
Robot 6-Axis Robot Workbench Intermediate No
Robot tutorial Robot Workbench Beginner r-frank No
Scripted Parts: Ball Bearing - Part 1 Part Scripting - Ball Bearing #1 Beginner 0:30 r-frank 0.16.6706 No
Scripted Parts: Ball Bearing - Part 2 Part Scripting - Ball Bearing #2 Beginner 0:30 r-frank 0.16.6706 No


PartDesign Bearingholder Tutorial I Product design - Bearingholder #1 Beginner 60 minutes NormandC No


PartDesign Bearingholder Tutorial II Product design - Bearingholder #2 Beginner 60 minutes NormandC No


Scripts Scripting Beginner onekk Carlo 0.19 No
Simple Box Cover Modeling Beginner 0:20 Normand C 0.14.3700 Yes
Sketcher Micro Tutorial - Constraint Practices Sketcher Beginner 0:30 Mark Stephen (Quick61) and vocx 0.19 Sketcher Constraints practices No
Sketcher reference No
Sketcher requirement for a sketch Sketcher Beginner Maker None No
Sketcher Tutorial Sketcher Beginner Ulrich No
TechDraw TemplateHowTo Drafting Intermediate 1:00 wandererfan 0.17 None No
Thread for Screw Tutorial Product design Advanced 1:00 DeepSOIC, Murdic, vocx 0.19 Updated: Thread for screw tutorial No
Toothbrush Head Stand Modeling Beginner 1:00 EmmanuelG 0.16 or greater Thingiverse 2403310 No
Topological data scripting Programming Intermediate No
Transient FEM analysis Transient FEM analysis Yes
Tutorial custom placing of windows and doors Architecture Intermediate 1:00 Vocx 0.18 or above None No
Tutorial for open windows Architecture Beginner 1:00 Vocx 0.18 or above None No
Tutorial FreeCAD POV ray Rendering Intermediate 2:00 Vocx 0.18 or above None No
Tutorial Render with Blender Rendering Intermediate 1:00 Vocx 0.18 or above None No
VRML Preparation for Robot Simulation Robot Workbench Intermediate 0.11.4252ppa1 No
Washers None Yes
Whiffle Ball tutorial Product design Beginner 0:30 r-frank and vocx 0.17 and above WhiffleBall_Tutorial_FCWiki.FCStd No
Wikihouse porting tutorial Wikihouse porting tutorial Intermediate/Advanced 1:00 No