Translations:Sketcher Workbench/12/de: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
Line 1: Line 1:
Wenn Sie nur 2D-Ansichten zum Ausdrucken erzeugen und keine 3D-Modelle erstellen möchten, dann probieren Sie den [[Draft Module/de|Draft Arbeitsbereich]].
Zu Beginn der Skizzierarbeit ist erst eine der 3 Hauptebenen des xyz-Koordinatensystems als Zeichenebene auszuwählen.

Revision as of 11:58, 5 January 2019

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Sketcher Workbench)
If you only need to produce 2D views for print, and don't want to create 3D models, check out the [[Draft_Workbench|Draft workbench]]. Unlike Sketcher elements, Draft objects don't use constraints; they are simple shapes defined at the moment of creation. Both Draft and Sketcher can be used for 2D geometry drawing, and 3D solid creation, although their preferred use is different: 
* The '''Sketcher Workbench''' is normally used together with the [[Part_Workbench|Part]] and [[PartDesign_Workbench|PartDesign]] workbenches to create solids.
* The '''Draft Workbench''' is normally used for simple planar drawings over a grid, as when drawing an architectural floor plan. In these situations Draft is mostly used together with the [[Arch_Workbench|Arch Workbench]].

Wenn Sie nur 2D-Ansichten zum Ausdrucken erzeugen und keine 3D-Modelle erstellen möchten, dann probieren Sie den Draft Arbeitsbereich.