Translations:Sketcher Tutorial/105/ru

From FreeCAD Documentation
Revision as of 10:48, 20 November 2021 by Heda (talk | contribs) (Created page with "The sketch should look as intended also after changing the key dimensions for example to 2000 mm and back to 30. You may need to use angle constraints at certain places to rea...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The sketch should look as intended also after changing the key dimensions for example to 2000 mm and back to 30. You may need to use angle constraints at certain places to reach this goal. The picture below shows a sketch, which was not robust against such changes. It is unusable now. In order to get the original state back, the undo-button can be used.

Retrieved from "http://wiki.freecad.org/index.php?title=Translations:Sketcher_Tutorial/105/ru&oldid=1078403"