Translations:Sketcher CreatePoint/8/en

From FreeCAD Documentation
Revision as of 17:18, 10 November 2021 by FuzzyBot (talk | contribs) (Importing a new version from external source)
  • By default points are created as construction geometry and therefore are not visible outside of Sketch editing mode. Use the Toggle Construction tool to change them to normal geometry.
  • A mode to snap to the grid can be set in the Sketcher Preferences. The point then snaps to the grid, if it has less than 25% grid distance to a grid line. The snap mode does not fix the point to the grid. It still has two degrees of freedom and can be moved with the mouse or constrained to other locations.