Translations:Part Thickness/15/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "{{Docnav/pl |Odsunięcie 2D |Odwzorowanie na powierzchni |Part |IconL=Part_Offset2D.svg |IconC=Workbench_Part...")
 
No edit summary
Line 2: Line 2:
|[[Part_Offset2D|Odsunięcie 2D]]
|[[Part_Offset2D|Odsunięcie 2D]]
|[[Part_ProjectionOnSurface|Odwzorowanie na powierzchni]]
|[[Part_ProjectionOnSurface|Odwzorowanie na powierzchni]]
|[[Part_Module/pl|Part]]
|[[Part_Module/pl|Część]]
|IconL=Part_Offset2D.svg
|IconL=Part_Offset2D.svg
|IconC=Workbench_Part.svg
|IconC=Workbench_Part.svg

Revision as of 07:18, 24 October 2020

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Part Thickness)
{{Docnav
|[[Part_Offset2D|Offset2D]]
|[[Part_ProjectionOnSurface|ProjectionOnSurface]]
|[[Part_Workbench|Part]]
|IconL=Part_Offset2D.svg
|IconR=Part_ProjectionOnSurface.svg
|IconC=Workbench_Part.svg
}}