Translations:Part Cone/10/en: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
Line 1: Line 1:
== Options ==
== Options == {| | [[File:PartConeProperty_en.png]] | {{KEY|Cone}} *Radius 1 - radius of the arc or circle defining the lower face *Radius 2 - radius of the arc or circle defining the upper face *Height - the height of the Part Cone *Angle - the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii.
{|
| [[File:PartConeProperty_en.png]]
|
{{KEY|Cone}}
*Radius 1 - radius of the arc or circle defining the lower face
*Radius 2 - radius of the arc or circle defining the upper face
*Height - the height of the Part Cone
*Angle - the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii.
|}‎

Revision as of 08:37, 25 July 2014

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Part Cone)
== Properties ==

Options

Cone

  • Radius 1 - radius of the arc or circle defining the lower face
  • Radius 2 - radius of the arc or circle defining the upper face
  • Height - the height of the Part Cone
  • Angle - the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii.