Difference between revisions of "Translations:Manual:Preparing models for 3D printing/48/fr"

From FreeCAD Documentation
Jump to navigation Jump to search
 
Line 1: Line 1:
 
{{Docnav/fr
 
{{Docnav/fr
|[[Manual:Modeling for product design/fr|Modélisation pour la conception de produits]]
+
|[[Manual:Modeling_for_product_design/fr|Modélisation pour la conception de produits]]
|[[Manual:Generating 2D drawings/fr|Génération de dessins 2D]]
+
|[[Manual:Generating_2D_drawings/fr|Génération de dessins 2D]]
 
|[[Manual:Introduction/fr|Début du manuel]]
 
|[[Manual:Introduction/fr|Début du manuel]]
|IconC=Crystal Clear manual.png
+
|IconC=Crystal_Clear_manual.png
 
}}
 
}}

Latest revision as of 12:04, 28 August 2021

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manual:Preparing models for 3D printing)
{{Docnav
|[[Manual:Modeling_for_product_design|Modeling for product design]]
|[[Manual:Generating_2D_drawings|Generating 2D drawings]]
|[[Manual:Introduction|Manual start]]
|IconC=Crystal_Clear_manual.png
}}
Translation{{Docnav/fr
|[[Manual:Modeling_for_product_design/fr|Modélisation pour la conception de produits]]
|[[Manual:Generating_2D_drawings/fr|Génération de dessins 2D]]
|[[Manual:Introduction/fr|Début du manuel]]
|IconC=Crystal_Clear_manual.png
}}