Translations:Manual:Modeling for product design/17/ro

From FreeCAD Documentation
Revision as of 15:30, 26 August 2018 by Luc (talk | contribs) (Created page with "* We will now carve the inside of the block, using the 16px Pocket tool, which is the PartDesign version of Part Cut....")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  • We will now carve the inside of the block, using the PartDesign Pocket.png Pocket tool, which is the PartDesign version of Part Cut. To make a pocket, we will create a sketch on the bottom face of our block, which will be used to remove a part of the block.
  • With the bottom face selected, press the Sketcher NewSketch.png New sketch button.
  • Draw a rectangle on the face.