From FreeCAD Documentation
Line 1:
Line 1:
=== Navegando en el espacio 3D ===
=== Navegando en el espacio 3D ===
FreeCAD tiene tres diferentes [[Mouse Model/es|Modos de navegación]] disponibles, que se pueden establecer en las preferencias del diálogo de configuración o cambiar pulsando el botón derecho en la vista 3D. Para ver más detalles sobre los modos mira la página [[Mouse Model/es|Modos de navegación]]. Para el modo de navegación por defecto ("Navegación CAD"), los comandos son los siguientes {{CAD Navigation}}
También tiene varias vistas preconfiguradas (vista superior, vista frontal, etc.) disponibles en el menú ''Ver'' y en la barra de herramientas ''Ver'' y, por atajos numéricos ({{KEY|1}}, {{KEY|2}}, etc...)
==[[Image:Workbench_Draft.png]] [[Draft Module/es|Croquizado 2D]]==
{{Draft Tools/es}}
==[[Image:Workbench_Part.png]] [[Part Module/es|Creando Piezas 3D]]==
{{Part Tools/es}}
==[[Drawing Module/es|Exportando a Dibujos 2D]]==
{{Drawing Tools/es}}
==[[Raytracing Module/es|Exportando a programas de renderizado externos]]==
{{Raytracing Tools/es}}
Revision as of 20:51, 5 February 2018
Information about message (contribute ) O FreeCAD tem tres modos de orientação diferentes, que podem ser definidos na caixa das preferências ou mudadas clicando com o botão direito na janela 3D. Os detalhes completos estão na página Modos do rato . No modo por defeito ("Navegação CAD"), os comandos são os seguintes
Select
Pan
Zoom
Rotate View
Rotate View
Alternate Method
Press the left mouse button over an object you want to select. Holding down ctrl allows the selection of multiple objects.
Click the middle mouse button and move the object around to pan
Use the mouse wheel to zoom in and out.
Click first with the middle mouse button, hold it down, and then click the left mouse button and drag the mouse in the desired direction. The cursor location at the middle mouse button click determines the center of rotation. Rotation works like spinning a ball which rotates around its center. If the buttons are released before you stop the mouse motion, the object continues spinning , if this is enabled. A double click with the middle mouse button sets a new center of rotation.
Click first with the middle mouse button, hold it down, and then click the right mouse button and drag the mouse in the desired direction. This method works just like the previously described Rotate View that uses Middle Mouse Button + Left Mouse Button, except that the middle mouse button may be released after the right mouse button is pressed. Users who use the mouse with their right hand may find this Rotate View method easier than the previous method.
Press and hold Ctrl key and click and release right mouse button to pan (rev 0.14)
Once in Pan mode, press and release left mouse button to Zoom, to exit back to pan mode press and release right mouse button (rev 0.14)
Once in Pan mode, click and momentary hold left mouse button to rotate, to exit back to pan mode press and release right mouse button (rev 0.14)
1 , 2 , etc...)
Insert the Draft tools here
Insert the Part tools here
Insert the Drawing tools here
Message definition (Getting started ) == Navigating in the 3D space ==
Navegando en el espacio 3D