Difference between revisions of "Translations:FEM tutorial/12/ru"

From FreeCAD Documentation
Jump to navigation Jump to search
(Created page with "# Создайте новый документ # Активируйте Part Workbench # Создайте Куб")
 
Line 1: Line 1:
# Создайте новый документ
+
# Create a new document
# Активируйте Part Workbench
+
# Activate the Part Workbench
# Создайте Куб
+
# Create a Cube
 +
# Change its '''Dimensions''' to the following:
 +
## Height:  1.000 mm
 +
## Length: 8.000 mm
 +
## Width: 1.000 mm

Revision as of 07:21, 5 August 2016

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (FEM tutorial)
# Create a [[Std_New|new document]] (press on the [[Image:Std_New.svg|24px|link=Std_New]] button)
# Activate the [[Image:Workbench_Part.svg|24px|link=Part_Workbench]] [[Part_Workbench|Part Workbench]]
# Create a Cube
# Change its '''Dimensions''' to the following:
## Height:  1.000 mm
## Length: 8.000 mm
## Width: 1.000 mm
Translation# Create a new document
# Activate the Part Workbench
# Create a Cube
# Change its '''Dimensions''' to the following:
## Height:  1.000 mm
## Length: 8.000 mm
## Width: 1.000 mm
  1. Create a new document
  2. Activate the Part Workbench
  3. Create a Cube
  4. Change its Dimensions to the following:
    1. Height: 1.000 mm
    2. Length: 8.000 mm
    3. Width: 1.000 mm