Translations:FEM ConstraintContact/7/fr: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
Line 1: Line 1:
#Cliquez sur [[Image:FEM ConstraintContact.png|32px]] ou choisissez {{KEY|Model}} → '''Mechanical Constraints''' → {{KEY|[[Image:FEM ConstraintContact.png|32px]] Constraint contact}} dans le menu du haut.
#Cliquez sur [[Image:FEM_ConstraintContact.svg|32px]] ou choisissez {{KEY|Model}} → '''Mechanical Constraints''' → {{KEY|[[Image:FEM_ConstraintContact.svg|32px]] Constraint contact}} dans le menu du haut.
# Sélectionnez la face principale.
# Sélectionnez la face principale.
# Sélectionnez la face esclave.
# Sélectionnez la face esclave.

Revision as of 15:32, 5 December 2020

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (FEM ConstraintContact)
# There are several ways to invoke the command:
#* Press the {{Button|[[Image:FEM_ConstraintContact.svg|16px]] [[FEM_ConstraintContact|Contact constraint]]}} button.
#* Select the {{MenuCommand|Model → Mechanical boundary conditions and loads → [[Image:FEM_ConstraintContact.svg|16px]] Contact constraint}} option from the menu.
# Select the master face.
# Select the slave face.
# Optionally enter a contact stiffness.
# {{Version|0.22}}: Optionally enter a clearance adjustment. All nodes of the slave face whose distance from the master face is smaller or equal to this number will be moved to lie on the master face at the beginning of the analysis. This adjustment doesn't cause any strains.
# {{Version|0.22}}: Optionally check the ''Enable Friction'' box to specify the friction coefficient and stick slope value.
# Optionally enter a friction coefficient. Default value of 0 means frictionless contact.
# {{Version|0.22}}: Optionally enter a stick slope value. It's an equivalent of contact stiffness for frictional behavior. It defines the slope of the linear relationship between shear stress and relative tangential displacement in the stick range (before slipping occurs).
  1. Cliquez sur ou choisissez Model → Mechanical Constraints → Constraint contact dans le menu du haut.
  2. Sélectionnez la face principale.
  3. Sélectionnez la face esclave.
  4. Entrez une raideur de contact.
  5. Entrez un coefficient de frottement.
Retrieved from "http://wiki.freecad.org/index.php?title=Translations:FEM_ConstraintContact/7/fr&oldid=806805"