Translations:A2plus Workbench/39/zh-hans

From FreeCAD Documentation
Revision as of 13:00, 2 January 2020 by Renoxray (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

在两个零件上选择平面。 按下工具栏按钮添加面与面重合约束。 约束对话框允许您指定约束方向和平面之间的偏移。 该偏移量也可以翻转。 如果偏移量为零，则约束将使平面重合。

Retrieved from "http://wiki.freecad.org/index.php?title=Translations:A2plus_Workbench/39/zh-hans&oldid=572150"