Translations:A2plus Workbench/39/zh-hans: Difference between revisions

Latest revision as of 13:00, 2 January 2020

Information about message (contribute)

This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.

Message definition (A2plus Workbench)

Select a plane on both parts. The toolbar button [[Image:A2p PlaneCoincidentConstraint.svg|24px]] adds the constraint {{Variable|planeCoincident}}. The constraint dialog allows you to specify a constraint direction and an offset between the planes. This offset can also be flipped. If the offset is zero, the constraint will make the planes coincident.

在两个零件上选择平面。按下工具栏按钮添加面与面重合约束。约束对话框允许您指定约束方向和平面之间的偏移。该偏移量也可以翻转。如果偏移量为零，则约束将使平面重合。

Revision as of 14:13, 30 December 2019 (view source) Renoxray (talk \| contribs) No edit summary ← Older edit		Latest revision as of 13:00, 2 January 2020 (view source) Renoxray (talk \| contribs) No edit summary
Line 1:		Line 1:
	在两个零件上选择一个平面。按下工具栏按钮[[Image:A2p PlaneCoincidentConstraint.svg \| 24px]]添加了{{Variable\|面与面重合}}约束。约束对话框允许您指定约束方向和平面之间的偏移。该偏移量也可以翻转。如果偏移量为零，则约束将使平面重合。		在两个零件上选择平面。按下工具栏按钮[[Image:A2p PlaneCoincidentConstraint.svg \| 24px]]添加{{Variable\|面与面重合}}约束。约束对话框允许您指定约束方向和平面之间的偏移。该偏移量也可以翻转。如果偏移量为零，则约束将使平面重合。