Translations:A2plus Workbench/37/zh-hans

From FreeCAD Documentation
Revision as of 14:08, 30 December 2019 by Renoxray (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

在两个零件上选择一个平面。 按下工具栏按钮添加面与面相互平行约束。 约束对话框允许您指定约束方向。 约束将使平面平行。

Retrieved from "http://wiki.freecad.org/index.php?title=Translations:A2plus_Workbench/37/zh-hans&oldid=571481"