Translations:A2plus Workbench/35/zh-hans: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
Line 1: Line 1:
在一个零件上选择圆柱[[Glossary#Face|面]]或线性[[Glossary#Edge|边]],在另一部分选择一个平面。 工具栏按钮[[Image:A2p AxisPlaneParallelConstraint.svg|24px]]添加{{Variable|轴与面平行}}约束。 约束将使轴或线平行于平面。
在一个零件上选择圆柱[[Glossary#Face|面]]或线性[[Glossary#Edge|边]],在另一部分选择一个平面。 工具栏按钮[[Image:A2p AxisPlaneParallelConstraint.svg|24px]]添加{{Variable|轴与面平行}}约束。 约束将使轴或线平行于平面。

Revision as of 12:58, 2 January 2020

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (A2plus Workbench)
Select either a cylindrical [[Glossary#Face|face]] or a linear [[Glossary#Edge|edge]] on one part and a plane on the other part. The toolbar button [[Image:A2p AxisPlaneParallelConstraint.svg|24px]] adds the constraint {{Variable|axisPlaneParallel}}. The constraint will make the axis or line parallel to the plane.

在一个零件上选择圆柱或线性,在另一部分选择一个平面。 工具栏按钮添加轴与面平行约束。 约束将使轴或线平行于平面。