Translations:A2plus Workbench/25/zh-hans: Difference between revisions

From FreeCAD Documentation
(Created page with "选择一个零件上的顶点(点)或圆形(将选择其中心点),或一个球面(也将选择其...")
 
No edit summary
Line 1: Line 1:
选择一个零件上的[[Glossary#Vertex|顶点]](点)或圆形[[Glossary#Edge|边]](将选择其中心点),或一个球面[[Glossary#Face|面]](也将选择其中心点)和另一个零件上的平面。点击工具栏按钮[[图像:A2p pointOnPlane constraint.svg|24px]]添加约束{{Variable|点对面}}。“约束”对话框允许您指定点和平面之间的偏移。此偏移也可以在平面的两侧之间翻转。如果偏移为零,则约束将顶点放置在平面上。
选择一个零件上的[[Glossary#Vertex|顶点]](点)或圆形[[Glossary#Edge|边]](将选择其中心点),或一个球面[[Glossary#Face|面]](也将选择其中心点)和另一个零件上的平面。点击工具栏按钮[[Image:A2p pointOnPlane constraint.svg|24px]]添加{{Variable|点对面}}约束。“约束”对话框允许您指定点和平面之间的偏移。此偏移也可以在平面的两侧之间翻转。如果偏移为零,则约束将顶点放置在平面上。

Revision as of 06:44, 29 December 2019

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (A2plus Workbench)
Select a [[Glossary#Vertex|vertex]] (point), or circular [[Glossary#Edge|edge]] (will select its center point), or a spherical [[Glossary#Face|face]] (will also select its center point) on one part and a plane on the other part. The toolbar button [[Image:A2p PointOnPlaneConstraint.svg|24px]] adds the constraint {{Variable|pointOnPlane}}. The constraint dialog allows you to specify an offset between the point and the plane. This offset can also be flipped between both sides of the plane. If the offset is zero, the constraint will put the vertex on the plane.

选择一个零件上的顶点(点)或圆形(将选择其中心点),或一个球面(也将选择其中心点)和另一个零件上的平面。点击工具栏按钮File:A2p pointOnPlane constraint.svg添加点对面约束。“约束”对话框允许您指定点和平面之间的偏移。此偏移也可以在平面的两侧之间翻转。如果偏移为零,则约束将顶点放置在平面上。