Translations:A2plus Workbench/13/zh-hans: Difference between revisions

Revision as of 12:39, 29 December 2019

Information about message (contribute)

This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.

Message definition (A2plus Workbench)

To create a constraint between parts, keep the {{KEY|Ctrl}} key pressed and select each an edge or face of two parts. Then click the toolbar button of the desired constraint. A dialog will pop up that is descried in section [[#Constraints|Constraints]]. The constraint will be added in the model tree attached to the affected parts.

通过按住Ctrl(MAC需使用用户command)键并选择两个零件的边或面来添加零件之间的约束。约束将附加在模型树中，并添加到受影响的零件。

Revision as of 14:12, 28 December 2019 (view source) Renoxray (talk \| contribs) (Created page with "通过按住{{KEY\|Ctrl}}键并选择两个零件的边或面来添加零件之间的约束。约束将附加在模型树中，并添加到受影响的零件。")		Revision as of 12:39, 29 December 2019 (view source) Renoxray (talk \| contribs) No edit summary Newer edit →
Line 1:		Line 1:
	通过按住{{KEY\|Ctrl}}键并选择两个零件的边或面来添加零件之间的约束。约束将附加在模型树中，并添加到受影响的零件。		通过按住{{KEY\|Ctrl}}(MAC需使用用户{{KEY\|command}})键并选择两个零件的边或面来添加零件之间的约束。约束将附加在模型树中，并添加到受影响的零件。