Translations:A2plus Workbench/119/zh-hans: Difference between revisions

Revision as of 14:07, 30 December 2019

Information about message (contribute)

This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.

Message definition (A2plus Workbench)

Select either a cylindrical [[Glossary#Face|face]] or a linear [[Glossary#Edge|edge]] on one part and a plane on the other part. The toolbar button [[Image:A2p AxisPlaneNormalConstraint.svg|24px]] adds the constraint {{Variable|axisPlaneNormal}}. The constraint will make the axis or line normal to the plane.

在一个零件上选择圆柱面或线性边，在另一零件选择一个平面。工具栏按钮添加了轴面相垂直约束。约束将使轴或线垂直于平面。

Revision as of 06:13, 29 December 2019 (view source) Renoxray (talk \| contribs) (Created page with "在一个零件上选择圆柱面或线性边，在另一零件选择一个平面。工具栏按钮Image:A2p AxisPlaneNormalConstrai...")		Revision as of 14:07, 30 December 2019 (view source) Renoxray (talk \| contribs) No edit summary Newer edit →
Line 1:		Line 1:
	在一个零件上选择圆柱[[Glossary＃Face\|面]]或线性[[Glossary＃Edge\|边]]，在另一零件选择一个平面。工具栏按钮[[Image:A2p AxisPlaneNormalConstraint.svg\|24px]]添加了{{Variable \| ~~axisPlaneNormal~~}}约束。约束将使轴或线垂直于平面。		在一个零件上选择圆柱[[Glossary＃Face\|面]]或线性[[Glossary＃Edge\|边]]，在另一零件选择一个平面。工具栏按钮[[Image:A2p AxisPlaneNormalConstraint.svg\|24px]]添加了{{Variable\|轴面相垂直}}约束。约束将使轴或线垂直于平面。