TechDraw "Указать радиус"

From FreeCAD Documentation
Revision as of 20:12, 15 September 2021 by Evgeniy (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎polski • ‎română • ‎русский

TechDraw RadiusDimension.svg Указать радиус

Системное название
TechDraw_RadiusDimension
Расположение в меню
TechDraw → Размеры → Указать радиус
Верстаки
TechDraw
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Указать диаметр

Описание

The Radius Dimension tool adds a radius dimension to a View. The dimension may be applied to any Edge in the drawing which is a circle or circular arc. The distance will initially be the projected distance (ie as shown on the drawing), but this may be changed to the actual 3D distance using the TechDraw LinkDimension.svg TechDraw LinkDimension tool.

TechDraw Dimension Radius example.png

Measuring a circle, indicating the radius

Применение

  1. Select a circle or circular arc in the drawing. (Note some arcs which appear to be circular are actually ellipses or BSplines. You cannot make a radius dimension in these cases)
  2. Press the TechDraw RadiusDimension.svg Radius Dimension button
  3. A dimension will be added to the View. The dimension may be dragged to the desired position.
  4. If needed, add tolerances as described in this page.

To change the properties of a dimension object either double-clicking it in the drawing or in the Tree view. This will open the dimension dialog.

Ограничения

Dimension objects are vulnerable to the "topological naming problem". See TechDraw LengthDimension for more information.

Свойства

See TechDraw LengthDimension.

Программирование

См. так же: TechDraw API и Основы составления скриптов FreeCAD.

The Radius Dimension tool can be used in macros and from the Python console by using the following functions:

dim1 = FreeCAD.ActiveDocument.addObject('TechDraw::DrawViewDimension','Dimension')
dim1.Type = "Radius"
dim1.References2D=[(view1, 'Edge1')]
rc = page.addView(dim1)