TechDraw Dimension Radius
|TechDraw → Dimension Radius|
|Introduced in version|
|TechDraw Dimension Diameter|
The Dimension Radius tool adds a radius dimension to a View. The dimension may be applied to any Edge in the drawing which is a circle or circular arc. The distance will initially be the projected distance (ie as shown on the drawing), but this may be changed to the actual 3D distance using thetool.
Measuring a circle, indicating the radius
How to use
- Select a circle or circular arc in the drawing. (Note some arcs which appear to be circular are actually ellipses or BSplines. You cannot make a radius dimension in these cases)
- Press the button
- A dimension will be added to the View. The dimension may be dragged to the desired position.
Dimension objects are vulnerable to "topological naming" issues. See the information in the TechDraw Dimension Length tool for more information.
This object has the same properties as the TechDraw Dimension Length tool. See that tool for details.
dim1 = FreeCAD.ActiveDocument.addObject('TechDraw::DrawViewDimension','Dimension') dim1.Type = "Radius" dim1.References2D=[(view1, 'Edge1')] rc = page.addView(dim1)