Panel zadań

From FreeCAD Documentation
Revision as of 20:30, 11 December 2019 by Kaktus (talk | contribs) (Created page with "{{Caption|Panel zadań, który otwiera się, gdy edytowany jest Sketch. Prezentowane są różne rodzaje informacji, takie jak komunikaty o rozwiązania...")

Wprowadzenie

Panel zadań pojawia się w zakładce Zadania okienka widoku łączonego. Jest to konfigurowalna przestrzeń, która może zawierać dowolny typ graficznego widżetu, jak składane okienka, tabele, pola wejściowe, pola wyboru, pola tekstowe, przyciski, etykiety, obrazy i inne elementy, w zależności od aktualnie aktywnego Środowiska pracy, oraz aktualnie aktywnego narzędzia.

Panel zadań prezentujący różne polecenia, gdy aktywne jest Środowisko pracy PartDesign.

Praca z panelem zadań

Panel zadań zwykle otwiera się, gdy narzędzie wymagające wprowadzenia danych przez użytkownika jest aktywowane. Odbywa się to poprzez naciśnięcie przycisku na pasku narzędzi lub podwójne kliknięcie obiektu. Jeśli narzędzie nie wymaga wprowadzania danych przez użytkownika, wygeneruje swój wynik lub zakończy działanie, ale nie wyświetli panelu zadań.

Użytkownik może wprowadzać dowolne dane, takie jak tekst, współrzędne punktów w przestrzeni 3D, elementy z listy, ściany z kształtu lub opcje modyfikacji sposobu działania narzędzia.

Panel zadań, który otwiera się, gdy edytowany jest Sketch. Prezentowane są różne rodzaje informacji, takie jak komunikaty o rozwiązaniach, opcje siatki, wiązania i elementy geometryczne.

There are many commands that require selection of shapes or objects present in the document; for such cases the task panel will wait for the user to select the appropriate objects from the tree view or the 3D view. When a task panel is open, it is possible to switch to the Model tab to display the tree view to choose an object; once this is done, it is possible to switch back to the Tasks tab to proceed with the command. The task panel is usually closed by clicking an OK or a Close button, or pressing the Esc key on the keyboard to abort the command.

Task panel that opens when editing an Arch Component. The panel waits for the user to select objects that can be added or subtracted from the component.

In particular, switching from the Tasks tab to the Model tab does not terminate the active command; the task will still be running in the background. The user is responsible for properly terminating or aborting the active command before starting a different task; leaving a task running may produce errors when trying to launch other tools.

Template:Interface