Std Base

From FreeCAD Documentation
Revision as of 19:33, 19 June 2020 by Roy 043 (talk | contribs)
This documentation is a work in progress. Please don't mark it as translatable since it will change in the next hours and days.
Std Base icon

Introduction

The Std Base is not a real workbench. This page just collects all commands from the base system which do not belong to a specific workbench, but which may be used in all of them.

The base commands and functions normally start with the prefix Std, indicating that they are "standard".

Tools

Most Std Base commands can be accessed from the standard menu. Those that are only available via a toolbar or a context menu are listed under Additional tools.

Standard menu

The standard menu is composed of 7 sub-menus. Each sub-menu has a dedicated page. Click on any of the names below.

File     Edit     View     Tools     Macro     Windows     Help

Additional tools

Toolbars

For quick access the content of the Std Base toolbars is listed below.

File toolbar

Workbench toolbar

Macro toolbar

View toolbar

Structure toolbar