Start up and Configuration/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "Powyższe zmienne środowiskowe są przeznaczone do użycia w celu stworzenia ''przenośnego'' środowiska FreeCAD. Dla przykładu, jak zmienne środowiskowe mogą być używa...")
(Created page with "'''Z linii wiersza poleceń'''")
Line 299: Line 299:
If the name is not found, an empty string is returned.
If the name is not found, an empty string is returned.


'''From command line'''
'''Z linii wiersza poleceń'''


Use the {{incode|--get-config <config-var-name>}} option to query a single name. Not all names are supported. For example:
Use the {{incode|--get-config <config-var-name>}} option to query a single name. Not all names are supported. For example:

Revision as of 17:55, 1 November 2021

Przegląd

Ta strona pokazuje różne sposoby uruchamiania programu FreeCAD i najważniejsze funkcje konfiguracyjne.

Uruchamianie FreeCAD z wiersza poleceń

FreeCAD może być uruchomiony normalnie poprzez dwukrotne kliknięcie na ikonie na pulpicie lub wybranie go z menu startowego, ale może być również uruchomiony bezpośrednio z wiersza poleceń. Pozwala to zmienić niektóre z domyślnych opcji uruchamiania.

Używanie opcji wiersza poleceń bez powłoki wiersza poleceń

  • W Ubuntu możesz utworzyć ikonę na pulpicie i edytować jej właściwości. Dodaj opcje wiersza poleceń oddzielone spacjami za nazwą programu w polu "Polecenie".
  • W systemie Windows utwórz skrót i edytuj jego właściwości. Dodaj opcje wiersza poleceń oddzielone spacjami do pola "Cel".

Argumenty dla wiersza poleceń

Opcje wiersza poleceń podlegają częstym zmianom, dlatego dobrze jest sprawdzić aktualne opcje wpisując:

FreeCAD --help

Z odpowiedzi można odczytać możliwe parametry:

 Usage: FreeCAD [options] File1 File2 ...
 
 Allowed options:
 
 Generic options:
   -v [ --version ]          Prints version string
   -h [ --help ]             Prints help message
   -c [ --console ]          Starts in console mode
   --response-file arg       Can be specified with '@name', too
   --dump-config             Dumps configuration
   --get-config arg          Prints the value of the requested configuration key
 
 Configuration:
   -l [ --write-log ]        Writes a log file to:
                             /home/username/.FreeCAD/FreeCAD.log
   --log-file arg            Unlike --write-log this allows logging to an 
                             arbitrary file
   -u [ --user-cfg ] arg     User config file to load/save user settings
   -s [ --system-cfg ] arg   System config file to load/save system settings
   -t [ --run-test ] arg     Test case - or 0 for all
   -M [ --module-path ] arg  Additional module paths
   -P [ --python-path ] arg  Additional python paths
   --single-instance         Allow to run a single instance of the application

W poniższej tabeli wybrane opcje zostały opisane bardziej szczegółowo:

Długa opcja Odpowiednio nazwa zmiennej konfiguracji Opis
--user-cfg <filename> UserParameter Nazwa pliku lub ścieżka względna, która kończy się nazwą pliku. Domyślnie user.cfg.
--module-path <dir> Poprzedza AdditionalModulePaths Katalog zawierający moduły. Opcja ta może być podana wielokrotnie, aby określić wiele katalogów.
--get-config <config-var-name> most Wyprowadza żądaną wartość w oknie kontekstowym. Kończy pracę po potwierdzeniu przyciskiem OK. Nie może być używane wielokrotnie. Jeśli użyto nieznanej / nieprawidłowej nazwy zmiennej, odpowiedź jest pusta. Flaga --console nie jest respektowana.

Opcje mogą być zapisane w dwóch formach: --long-option arg oraz --long-option=arg.

Pliki odpowiedzi i konfiguracji

FreeCAD może odczytać niektóre z tych opcji z pliku konfiguracyjnego. Plik ten musi znajdować się w ścieżce bin i musi mieć nazwę FreeCAD.cfg. Pamiętaj, że opcje podane w linii poleceń nadpisują plik konfiguracyjny!

Niektóre systemy operacyjne mają bardzo niski limit znaków w wierszu poleceń. Powszechnym sposobem na obejście tych ograniczeń jest użycie plików odpowiedzi. Plik odpowiedzi jest po prostu plikiem konfiguracyjnym, który używa tej samej składni co wiersz poleceń. Jeśli linia poleceń określa plik odpowiedzi, jest on ładowany i przetwarzany dodatkowo do linii poleceń:

FreeCAD @ResponseFile.txt 

lub:

FreeCAD --response-file=ResponseFile.txt

lub:

FreeCAD --response-file ResponseFile.txt

Opcje ukryte

Istnieje kilka opcji niewidocznych dla użytkownika. Opcje te są np. parametrami X-Window parsowanymi przez system Windows:

  • -display - Ustawia wyświetlanie X-ów (domyślnie $DISPLAY).
  • -geometry - ustawia geometrię klienta pierwszego wyświetlanego okna.
  • -fn lub -font - definiuje czcionkę aplikacji. Czcionka powinna być określona przy użyciu logicznego opisu czcionki X.
  • -bg lub -background - Ustawia domyślny kolor tła i paletę aplikacji (obliczane są jasne i ciemne odcienie).
  • -fg lub -foreground - Ustawia domyślny kolor pierwszego planu.
  • -btn lub -button - Ustawia domyślny kolor przycisku.
  • -name - Ustawia nazwę aplikacji.
  • -title - Ustawia tytuł aplikacji.
  • -visual - Zmusza aplikację do używania obrazu TrueColor na 8-bitowym wyświetlaczu.
  • -ncols - Ogranicza liczbę kolorów alokowanych w kostce kolorów na wyświetlaczu 8-bitowym, jeżeli aplikacja używa specyfikacji kolorów QApplication::ManyColor. Jeśli licznik wynosi 216, to używana jest kostka koloru 6x6x6 (tj. 6 poziomów czerwonego, 6 zielonego i 6 niebieskiego); dla innych wartości używana jest kostka w przybliżeniu proporcjonalna do kostki 2x3x1.
  • -cmap - Powoduje, że aplikacja instaluje prywatną mapę kolorów na 8-bitowym wyświetlaczu.

Uruchamianie FreeCAD bez GUI

FreeCAD jest zazwyczaj zbudowany z dwóch plików wykonywalnych: obsługującego GUI, zwanego FreeCAD lub freecad, oraz bez interfejsu graficznego, zwanego FreeCADCmd lub freecadcmd. FreeCAD może być używany w trybie konsoli przy użyciu przełącznika --console (co jest domyślnym zachowaniem FreeCADCmd):

FreeCAD --console

W trybie konsoli nie będzie wyświetlany żaden graficzny interfejs użytkownika, a pojawi się znak zachęty interpretera Python: >>>. Z poziomu tego monitu masz taką samą funkcjonalność jak z interpreterem Python, który działa wewnątrz GUI FreeCAD, oraz dostęp do wszystkich modułów i wtyczek programu, z wyjątkiem modułu FreeCADGui. Należy pamiętać, że moduły zależne od FreeCADGui mogą być również niedostępne.

Aby dowiedzieć się więcej o konsoli lub trybie bez GUI, odwiedź stronę FreeCAD bez GUI.

Uruchamianie modułów, makrodefinicji i skryptów

Typ pliku System Przykład w wierszu poleceń
Moduł Windows "C:\Program Files\FreeCAD\bin\FreeCAD.exe" -M "C:\FreeCAD\Mod\Draft"
Linux FreeCAD_0.19 -M ~/.FreeCAD/Mod/Draft
Linux (AppImage) path/to/FreeCADXXX.AppImage -M ~/.FreeCAD/Mod/Draft
.FCMacro or .py Windows "C:\Program Files\FreeCAD\bin\FreeCAD.exe" "C:\Users\userName\AppData\Roaming\FreeCAD\Mod\WorkFeature\start_WF.FCMacro"
Linux FreeCAD_0.19 ~/.FreeCAD/Mod/WorkFeature/start_WF.FCMacro
Linux (AppImage) path/to/FreeCADXXX.AppImage ~/.FreeCAD/Mod/WorkFeature/start_WF.FCMacro

Zobacz na stronie Automatyczne uruchamianie makroinstrukcji jak skonfigurować makrodefinicję do automatycznego uruchamiania przy starcie programu FreeCAD.

Zmienne środowiskowe

FreeCAD obsługuje następujące zmienne środowiskowe, które mogą być używane do konfigurowania katalogów: dostępne w wersji 0.19

Zmienna środowiskowa Odpowiadająca nazwa zmiennej konfiguracyjnej Opis
FREECAD_USER_HOME UserHomePath FreeCAD's "base" directory for keeping local user data.
FREECAD_USER_DATA UserAppData Jeśli nie jest ustawiony, domyślnie ustawia się na FREECAD_USER_HOME/.FreeCAD, ale tylko wtedy, gdy FREECAD_USER_HOME jest ustawiony.
FREECAD_USER_TEMP AppTempPath Jeśli nie jest ustawiony, domyślnie ustawia się na FREECAD_USER_HOME/temp, ale tylko wtedy, gdy FREECAD_USER_HOME jest ustawiony.

Jeśli podana ścieżka nie istnieje, ustawienie jest ignorowane!

Powyższe zmienne środowiskowe są przeznaczone do użycia w celu stworzenia przenośnego środowiska FreeCAD. Dla przykładu, jak zmienne środowiskowe mogą być używane z linii poleceń w systemie Linux, zapoznaj się z uwagi dla użytkowników Linuksa na stronie z plikami do pobrania.

HOME

FreeCAD uses Qt, which does honor the HOME environmental variable. Thus, setting HOME can be used to specify the base directory of Qt-related configuration files (.config/FreeCAD/FreeCAD.conf).

FreeCad itself does not honor the HOME environmental variable (because it determines the user's home directory from a lower-level system API). Use FREECAD_USER_HOME for this pupose.

TMPDIR

The default temporary directory is /tmp/. The TMPDIR environmental variable can be used to override the default. (Editor: precedence?).

Libraries

Some libraries need to call system environment variables. Sometimes when there is a problem with a FreeCAD installation, it is because some environment variable is absent or incorrect. Therefore, some important variables get duplicated in the Config and saved in the log file.

Python

  • PYTHONPATH
  • PYTHONHOME
  • TCL_LIBRARY
  • TCLLIBPATH

OpenCascade

  • CSF_MDTVFontDirectory
  • CSF_MDTVTexturesDirectory
  • CSF_UnitsDefinition
  • CSF_UnitsLexicon
  • CSF_StandardDefaults
  • CSF_PluginDefaults
  • CSF_LANGUAGE
  • CSF_SHMessage
  • CSF_XCAFDefaults
  • CSF_GraphicShr
  • CSF_IGESDefaults
  • CSF_STEPDefaults

Zestaw konfiguracji

On every startup FreeCAD examines its surrounding and the command line parameters. It builds up a configuration set which holds the essence of the runtime information. This information is later used to determine the place where to save user data or log files. It is also very important for post postmortem analyzes. Therefore it is saved in the log file.

User related information

Config var name Synopsis Example Windows Example Linux
UserAppData Path where FreeCAD stores User Related application data. C:\Documents and Settings\username\AppData\FreeCAD
Short path : %APPDATA%\FreeCAD
/home/username/.FreeCAD
Short path : ~/.FreeCAD
UserParameter File where FreeCAD stores User Related application data. C:\Documents and Settings\username\AppData\FreeCAD\user.cfg
Short path : %APPDATA%\FreeCAD\user.cfg
/home/username/.FreeCAD/user.cfg
Short path : ~/.FreeCAD/user.cfg
SystemParameter File where FreeCAD stores Application Related data. C:\Documents and Settings\username\AppData\FreeCAD\system.cfg
Short path : %APPDATA%\FreeCAD\system.cfg
/home/username/.FreeCAD/system.cfg
Short path : ~/.FreeCAD/system.cfg
UserHomePath Home path of the current user C:\Documents and Settings\username
Short path : %USERPROFILE%
/home/username
Short path : ~

Note: For Linux distributions, an additional configuration file that relates to Qt may exist at path /home/username/.config/FreeCAD/FreeCAD.conf.

Argumenty dla wiersza poleceń

Config var name Synopsis Example
LoggingFile 1 if the logging is switched on 1
LoggingFileName File name where the log is placed C:\Documents and Settings\username\AppData\FreeCAD\FreeCAD.log
RunMode This indicates how the main loop will work. "Script" means that the given script is called and then exit. "Cmd" runs the command line interpreter. "Internal" runs an internal script. "Gui" enters the Gui event loop. "Module" loads a given python module. "Cmd"
FileName Meaning depends on the RunMode
ScriptFileName Meaning depends on the RunMode
Verbose Verbosity level of FreeCAD "" or "strict"
OpenFileCount Holds the number of files opened through command line arguments "12"
AdditionalModulePaths Holds the additional Module paths given in the cmd line "extraModules/"

System related

Config var name Synopsis Example Windows Example Linux
AppHomePath Path where FreeCAD is installed c:/Progam Files/FreeCAD_0.19 /user/local/FreeCAD_0.19
PythonSearchPath Holds a list of paths which python search modules. This is at startup can change during execution
AppTempPath Path of the temporary directory. Can be given with TMPDIR environment variable, or with the Parameter Editor: Tools → Edit parameters... → BaseApp → Preferences → General → TempPath /tmp/ (default)

Build related information

The table below shows the available information about the Build version. Most of it comes from the Subversion repository. This stuff is needed to exactly rebuild a version!

Config var name Synopsis Example
BuildVersionMajor Major Version number of the Build. Defined in src/Build/Version.h.in 0
BuildVersionMinor Minor Version number of the Build. Defined in src/Build/Version.h.in 7
BuildRevision SVN Repository Revision number of the src in the Build. Generated by SVN 356
BuildRevisionRange Range of different changes 123-356
BuildRepositoryURL Repository URL https://free-cad.svn.sourceforge.net/svnroot/free-cad/trunk/src
BuildRevisionDate Date of the above Revision 2007/02/03 22:21:18
BuildScrClean Indicates if the source was changed after checkout Src modified
BuildScrMixed Src not mixed

Branding related

These Config entries are related to the branding mechanism of FreeCAD. See Branding for more details.

Config var name Synopsis Example
ExeName Name of the build Executable file. Can differ from FreeCAD if a different main.cpp is used. FreeCAD.exe
ExeVersion Over all Version shows up at start time "0.19"
AppIcon Icon which is used for the Executable, shows in Application MainWindow. "FCIcon"
ConsoleBanner Banner which is prompted in console mode
SplashPicture Name of the Icon used for the Splash Screen "FreeCADSplasher"
SplashAlignment Alignment of the Text in the Splash dialog "Bottom" or "Left"
SplashTextColor Color of the splasher Text "#000000"
StartWorkbench Name of the Workbench which get started automatically after Startup "Part design"
HiddenDockWindow List of dockwindows (separated by a semicolon) which will be disabled "Property editor"

Querying the configuration

From FreeCAD's Python console

Entries of the configuration set can be queried with the config var name (see tables above) from the Python console. For example:

 >>> FreeCAD.ConfigGet("ExeVersion")
 '0.19'

If the name is not found, an empty string is returned.

Z linii wiersza poleceń

Use the --get-config <config-var-name> option to query a single name. Not all names are supported. For example:

 FreeCAD_0.19 --get-config ExeVersion

Use the --dump-config option to get a list of names and their values. Not all names are supported.

Z konsoli FreeCAD

Uruchom FreeCAD w trybie konsoli za pomocą --console i zadawaj pytania za pomocą kodu Python. Na przykład:

$ FreeCAD_0.19 --console
  [FreeCAD Console mode <Use Ctrl-D (i.e. EOF) to exit.>]
  >>> FreeCAD.ConfigGet("ExeVersion")
  '0.19'
  >>> exit()

Dla Linuksa (powłoka bash) możesz zmodyfikować następującą linię poleceń, aby dostosować ją do swoich potrzeb:

$ FreeCAD_0.19 --console <<EOF
  print( "FREECAD_USER_HOME: " + ( "not set" if ( os.environ.get('FREECAD_USER_HOME') is None ) else os.environ.get('FREECAD_USER_HOME') ) )
  print( "UserHomePath: " + FreeCAD.ConfigGet("UserHomePath") )
  exit()
  EOF

Uruchamianie programu FreeCAD z pulpitu

Linux: Tworzenie dodatkowej opcji startowej

Poniżej zakładamy, że Twój pulpit jest tak skonfigurowany, że możesz z niego uruchomić FreeCAD. W zależności od dystrybucji Linuksa i środowiska graficznego, być może będziesz musiał dostosować następujące kroki:

  1. Skopiuj plik wpisu freedesktop dla FreeCAD z lokalizacji /usr/share/applications/freecad.desktop do ~/.local/share/applications.
  2. Zmień nazwę pliku z freecad.desktop na coś innego (np. MyFreeCADConfig.desktop).
  3. Otwórz plik w edytorze tekstu i zmień sposób wywoływania aplikacji FreeCAD, modyfikując linię zaczynającą się od Exec.
  4. W wyniku tego pojawi się dodatkowa pozycja w Twoim menu startowym/uruchomieniu aplikacji. W ten sposób możesz mieć wiele wpisów dla FreeCAD z różnymi opcjami uruchamiania.

Uruchamianie programu FreeCAD z nośnika USB

dostępne w wersji 0.19

Windows

Umieść plik wykonywalny FreeCAD, FreeCAD.exe, na nośniku USB. Utwórz plik wsadowy FreeCAD.bat i umieść go w tym samym katalogu co FreeCAD.exe. Wewnątrz pliku wsadowego napisz:

set CURRENTDIR=%cd%
set FREECAD_USER_HOME=%CURRENTDIR%
start FreeCAD.exe -u FreeCAD/user.cfg -s FreeCAD/system.cfg --write-log

or with FREECAD_USER_DATA

set CURRENTDIR="%cd%"
set FREECAD_USER_DATA=%CURRENTDIR%/..
start FreeCAD.exe -u %FREECAD_USER_DATA%/user.cfg -s %FREECAD_USER_DATA%/system.cfg

za pomocą skryptu umieszczonego w katalogu głównym nośnika USB

set CURRENTDIR=%cd%
set FREECAD_USER_DATA=%CURRENTDIR%FreeCAD\
start %cd%FreeCAD\bin\FreeCAD.exe -u %FREECAD_USER_DATA%user.cfg -s %FREECAD_USER_DATA%system.cfg

Teraz kliknij dwukrotnie plik wsadowy, aby uruchomić program FreeCAD. (zobacz)