Sketcher: Convalida lo schizzo

From FreeCAD Documentation
Revision as of 08:57, 18 April 2019 by Renatorivo (talk | contribs) (Created page with "L'utilità '''Convalida lo schizzo''' può essere usata per riparare uno schizzo che non è più modificabile, cha ha vincoli non validi, o per aggiungere Sketcher Constrain...")

Convalida lo schizzo

Posizione nel menu
Sketch/Part Design → Convalida lo schizzo...
Ambiente
Sketcher, PartDesign
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Nessuno

Descrizione

L'utilità Convalida lo schizzo può essere usata per riparare uno schizzo che non è più modificabile, cha ha vincoli non validi, o per aggiungere vincoli di coincidenza a uno schizzo creato da una geometria importata come file DXF. Può anche essere utile individuare una coincidenza mancante in uno schizzo nativo che genera un errore "can't validate broken face" quando si tenta di applicare una funzione di PartDesign.


Utilizzo

  1. Select the sketch to validate, either from the Model tree, or by clicking on one of its edges in the 3D view. Note: the sketch must not be in editing mode. If you are in sketch edit mode, you need to exit the sketch.
  2. Open the validate sketch utility from the Sketch or Part Design menu.
  3. See Options below for operation.
  4. Press the Close button when done.

Options

Missing coincidences

Finds out missing coincidences for overlapping vertices, and adds them. Press the Find button; a pop up dialog will appear to report how many missing coincidences were found; they will be shown in the 3D view as yellow crosses. Press OK to close the dialog, then press the Fix button to add the missing coincidences.

If necessary, define a larger tolerance value in the drop-down field.

Leave the "Ignore construction geometry" checkbox checked to disregard construction geometry in the analysis.

Invalid constraints

Reversed external geometry

Constraint orientation locking