Sketcher:Rifila
Rifila |
Posizione nel menu |
---|
Sketch → Geometrie → Rifila |
Ambiente |
Sketcher, PartDesign |
Avvio veloce |
T |
Introdotto nella versione |
- |
Vedere anche |
Nessuno |
Questo strumento accorcia, rifila una linea fino al primo punto di intersezione, all'interno o all'esterno di una sagoma.
- Avviare il comando
- Cliccare sulla linea da rifilare (sulla parte che si intende cancellare)
- Premere il tasto Template:KEY/it o fare clic con il tasto destro per terminare l'operazione e uscire dalla funzione.
- Press the trim edge button. The mouse pointer turns into a white cross with a red trim symbol.
- Click on the edge that you want to trim.
- The line segment will be trimmed to the nearest overlapping line(s). If there are other sketch elements on both sides of the clicked position, the clicked piece is cut out.
- Pressing ESC or pressing the right mouse button will terminate the function.
Limitations
- Arcs of hyperbola, arcs of parabola and B-splines cannot be trimmed at this time.