Sketcher Trimming/it: Difference between revisions

From FreeCAD Documentation
No edit summary
(Replaced content with "== Utilizzo ==")
Line 14: Line 14:
[[Image:SketcherTrimExample1.png]] [[Image:SketcherTrimExample2.png]] [[Image:SketcherTrimExample3.png]]
[[Image:SketcherTrimExample1.png]] [[Image:SketcherTrimExample2.png]] [[Image:SketcherTrimExample3.png]]


== Utilizzo ==
<div class="mw-translate-fuzzy">
# Avviare il comando
# Cliccare sulla linea da rifilare (sulla parte che si intende cancellare)
* Premere il tasto {{KEY/it|ESC}} o fare clic con il tasto destro per terminare l'operazione e uscire dalla funzione.
</div>


# Press the [[File:Sketcher Trimming.png|24px]] '''trim edge''' button. The mouse pointer turns into a white cross with a red trim symbol.
# Press the [[File:Sketcher Trimming.png|24px]] '''trim edge''' button. The mouse pointer turns into a white cross with a red trim symbol.

Revision as of 03:47, 12 November 2018

Rifila

Posizione nel menu
Sketch → Geometrie → Rifila
Ambiente
Sketcher
Avvio veloce
Nessuno
Introdotto nella versione
0.12
Vedere anche
Estendi lo spigolo

Descrizione

Questo strumento accorcia, rifila una linea fino al primo punto di intersezione, all'interno o all'esterno di una sagoma.

Utilizzo

  1. Press the trim edge button. The mouse pointer turns into a white cross with a red trim symbol.
  2. Click on the edge that you want to trim.
  3. The line segment will be trimmed to the nearest overlapping line(s). If there are other sketch elements on both sides of the clicked position, the clicked piece is cut out.
  4. Pressing ESC or pressing the right mouse button will terminate the function.

Limitations

  • Arcs of hyperbola, arcs of parabola and B-splines cannot be trimmed at this time.