Szkicownik: Przełącz tryb konstrukcji

From FreeCAD Documentation
Revision as of 19:07, 19 May 2021 by Kwahoo (talk | contribs) (Created page with "To narzędzie przełącza geometrię do/z trybu konstrukcyjnego. Może być użyte na dowolnym typie geometrii: linii, łuku czy okręgu.")

Szkicownik: Przełącz geometrię konstrukcji

Lokalizacja w menu
Sketch → Elementy geometryczne szkicownika → Przełącz geometrię konstrukcji
Środowisko pracy
Szkicownik
Domyślny skrót
brak
Wprowadzono w wersji
-
Zobacz także
brak

Opis

To narzędzie przełącza geometrię do/z trybu konstrukcyjnego. Może być użyte na dowolnym typie geometrii: linii, łuku czy okręgu.

Construction geometry is an important tool of the sketcher. When using a sketch for a 3D operation, construction geometry is ignored.

In Edit sketch, construction geometry is shown as blue, and won't turn green when a sketch is fully constrained. Once you Leave sketch, construction geometry is hidden in the 3D view.

Construction lines can be used as rotation axis by the PartDesign Revolution feature.

Usage

  1. Select one or more sketch geometry in the 3D view
  2. Invoke the Sketcher ToggleConstruction tool using several ways:
    • Clicking on the Toggle construction.
    • Using the Sketch → Sketcher geometries → Toggle construction geometry entry in the Sketcher menu

Example

Use Construction mode on some sketch elements,

and once you leave the sketcher editing mode, geometry that was turned into construction have become invisible in the 3D view (but are still present in the Sketcher editing mode).

File:Sketcher ConstructionMode fr 02.png