Sketcher SwitchVirtualSpace/it: Difference between revisions

From FreeCAD Documentation
(Created page with "{{GuiCommand/it |Name=Sketcher Switch virtual space |Name/it=Cambia spazio virtuale |Icon=Sketcher SwitchVirtualSpace.svg |MenuLocation=Sketch → Spazio virtuale dello Sketch...")
(Created page with "==Descrizione==")
Line 9: Line 9:
}}
}}


==Description==
==Descrizione==


The FreeCAD Sketcher has two virtual spaces on which constraints can be set. Usually all constraints gets set on virtual space one. You can move some constraints to virtual space two. This can help to inspect only on a few constraints at a time.
The FreeCAD Sketcher has two virtual spaces on which constraints can be set. Usually all constraints gets set on virtual space one. You can move some constraints to virtual space two. This can help to inspect only on a few constraints at a time.

Revision as of 22:18, 21 January 2019

Cambia spazio virtuale

Posizione nel menu
Sketch → Spazio virtuale dello Sketcher → Cambia spazio virtuale
Ambiente
Sketcher
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Nessuno

Descrizione

The FreeCAD Sketcher has two virtual spaces on which constraints can be set. Usually all constraints gets set on virtual space one. You can move some constraints to virtual space two. This can help to inspect only on a few constraints at a time.


How to use

To move constraints to the other virtual space:

  1. Select constraints you want to move.
  2. Press the Switch virtual space button.

To switch the virtual space:

  1. Make sure you have no constraint selected.
  2. Press the Switch virtual space button.

Note: If you decide to set constraints on two virtual spaces, don't forget the constraints on the hidden virtual space later on. This can be confusing.