Sketcher SwitchVirtualSpace

From FreeCAD Documentation
Revision as of 20:47, 26 September 2020 by Vocx (talk | contribs) (if you decide to set constraints on the second virtual space, don't forget about them later on if you don't see them in the 3D view.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Other languages:
Deutsch • ‎English • ‎français • ‎italiano • ‎русский

Sketcher SwitchVirtualSpace.svg Sketcher SwitchVirtualSpace

Menu location
Sketch → Sketcher virtual space → Switch virtual space
Workbenches
Sketcher
Default shortcut
None
Introduced in version
0.17
See also
None


Description

The FreeCAD Sketcher has two virtual spaces on which constraints can be set. Usually all constraints gets set on virtual space one. You can move some constraints to virtual space two. This can help to inspect only on a few constraints at a time.

Usage

To move constraints to the other virtual space:

  1. Select constraints you want to move.
  2. Press the Sketcher SwitchVirtualSpace.svg Switch virtual space button.

To switch the virtual space:

  1. Make sure you have no constraint selected.
  2. Press the Sketcher SwitchVirtualSpace.svg Switch virtual space button.

Note: if you decide to set constraints on the second virtual space, don't forget about them later on if you don't see them in the 3D view.