Sketcher Diviser
Sketcher Split |
Menu location |
---|
Sketch → Sketcher geometries → Split |
Workbenches |
Sketcher |
Default shortcut |
None |
Introduced in version |
0.20 |
See also |
Sketcher Trimming |
Description
This tool allows to divide an edge into two identical ones, while most of the constraints are duplicated, so both parts remain constrained apart from split point position. For a special case of a circle, this is converted to an loose ends arc with existing circle constraints being transferred to the new arc.
Usage
- Press the Split button. The mouse pointer turns into a white cross with a red split symbol.
- Click on the edge in the place where you want to split it.
- From the line and arc edges, two new will be created, connected at the point clicked. A circle is converted to an arc with the very same center point and other constraints the original circle had.
- Pressing Esc or pressing the right mouse button will terminate the function.
Limitations
- For ellipse, parabola, hyperbola and B-splines the action is not yet supported.
Notes
- All coincidences are transferred - start point, end point and center point (if applicable).
- Point on object constraint is transferred to the closer newly created edge.
- Vertical and horizontal constraints are copied to both offsprings.
- Parallel and perpendicular constraints are copied for both line segments, for arc only once, to the closer part.
- Equality constraint is transferred only for resulting arc edges, line segments do not receive it.
- Symmetry constraint is currently not transferred.
- Block constraint is currently not transferred.
- Horizontal, vertical and length constraints between points are transferred to the outer points of the new edges.
- Point distance constraint is assigned only once, to the closer edge segment.
- Radius and diameter constraints are copied to any resulting arc.
- Angle constraint is currently not transferred
Sketcher
- Général : Créer une esquisse, Modifier l'esquisse, Esquisse sur une face, Réorienter l'esquisse, Valider l'esquisse, Fusionner les esquisses, Esquisse miroir, Quitter l'esquisse, Vue de l'esquisse, Vue de section, Grille, Aimantation, Ordre de rendu, Arrêt de l'opération
- Géométries : Point, Ligne, Arc, Arc par 3 points, Cercle, Cercle par 3 points, Ellipse par son centre, Ellipse par 3 points, Arc d'ellipse, Arc d'hyperbole, Arc de parabole, B-spline simple, B-spline périodique, B-spline par des nœuds, B-spline périodique par des nœuds, Polyligne, Rectangle, Rectangle centré, Rectangle arrondi, Triangle, Carré, Pentagone, Hexagone, Heptagone, Octogone, Polygone régulier, Contour oblong, Congé, Congé avec contrainte, Ajuster, Prolonger, Diviser, Géométrie externe, Copie carbone, Géométrie de construction
- Contraintes :
- Contraintes geometriques : Coïncidence, Point sur objet, Vertical, Horizontal, Parallèle, Perpendiculaire, Tangente, Égalité, Symétrie, Blocage
- Contraintes de dimension : Fixe, Distance horizontale, Distance verticale, Dimensionnelle, Rayon ou poids, Diamètre, Rayon automatique, Angle, Contrainte de réfraction
- Outils de contraintes : Contraintes pilotantes, Activation des contraintes
- Outils : Degrés de liberté non contraints, Contraintes associées, Éléments associés aux contraintes, Contraintes redondantes, Contraintes conflictuelles, Géométrie interne, Origine, Axe horizontal, Axe vertical, Symétrie, Clone, Copie, Déplacer, Réseau rectangulaire, Supprimer l'alignement des axes, Supprimer tous les éléments de géométrie, Supprimer toutes les contraintes
- Outils B-spline : Degré de la B-spline, Polygone de contrôle de la B-spline, Peigne de courbure, Multiplicité des nœuds, Poids des points de contrôle, Convertir une géométrie en B-spline, Augmenter le degré, Diminuer le degré, Augmenter la multiplicité des nœuds, Diminuer la multiplicité des nœuds, Insérer un nœud, Joindre des courbes
- Espace virtuel : Espace virtuel
Hub utilisateurs
- Démarrer avec FreeCAD
- Installation : Téléchargements, Windows, Linux, Mac, Logiciels supplémentaires, Docker, AppImage, Ubuntu Snap
- Bases : À propos de FreeCAD, Interface, Navigation par la souris, Méthodes de sélection, Objet name, Préférences, Ateliers, Structure du document, Propriétés, Contribuer à FreeCAD, Faire un don
- Aide : Tutoriels, Tutoriels vidéo
- Ateliers : Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test, Web