Sketcher SelectElementsWithDoFs/ru: Difference between revisions
(Created page with "{{GuiCommand/ru |Name/ru=Sketcher Select solver DoFs |Icon=Sketcher SelectElementsWithDoFs.svg |MenuLocation=Sketch → Инструменты для эскиза → Select s...") |
(Created page with "==Описание==") |
||
| Line 8: | Line 8: | ||
}} |
}} |
||
==Описание== |
|||
==Description== |
|||
This tool is meant to aid in fully constraining a sketch by highlighting in green the sketch elements with remaining degrees of freedom (DoF). |
This tool is meant to aid in fully constraining a sketch by highlighting in green the sketch elements with remaining degrees of freedom (DoF). |
||
Revision as of 05:39, 12 November 2018
|
|
| Системное название |
|---|
| Нет |
| Расположение в меню |
| Sketch → Инструменты для эскиза → Select solver DoFs |
| Верстаки |
| Sketcher |
| Быстрые клавиши |
| Нет |
| Представлено в версии |
| 0.18 |
| См. также |
| Нет |
Описание
This tool is meant to aid in fully constraining a sketch by highlighting in green the sketch elements with remaining degrees of freedom (DoF).
How to use
- In the Solver messages box located at the top of the Tasks tab, the following message should be displayed:
where "X" is the number of degrees of freedom remaining in the sketch; click on the blue link, or use the menu.Under-constrained sketch with X degrees of freedom
- The elements which have degrees of freedom are highlighted in green.
- Click anywhere in the sketch to clear the highlight color.