Difference between revisions of "Sketcher SelectElementsWithDoFs"

From FreeCAD Documentation
Jump to navigation Jump to search
(Marked this version for translation)
m (Changed section to 'Usage')
Line 18: Line 18:
 
This tool is meant to aid in fully constraining a sketch by highlighting in green the sketch elements with remaining degrees of freedom (DoF).
 
This tool is meant to aid in fully constraining a sketch by highlighting in green the sketch elements with remaining degrees of freedom (DoF).
  
==How to use== <!--T:4-->
+
==Usage== <!--T:4-->
  
 
<!--T:5-->
 
<!--T:5-->

Revision as of 19:39, 30 January 2020

Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎português • ‎română • ‎русский

Sketcher SelectElementsWithDoFs.svg Sketcher Select solver DoFs

Menu location
Sketch → Sketcher tools → Select solver DoFs
Workbenches
Sketcher
Default shortcut
None
Introduced in version
0.18
See also
None

Description

This tool is meant to aid in fully constraining a sketch by highlighting in green the sketch elements with remaining degrees of freedom (DoF).

Usage

  1. In the Solver messages box located at the top of the Tasks tab, the following message should be displayed:

    Under-constrained sketch with X degrees of freedom

    where "X" is the number of degrees of freedom remaining in the sketch; click on the blue link, or use the menu.
  2. The elements which have degrees of freedom are highlighted in green.
  3. Click anywhere in the sketch to clear the highlight color.