Sketcher Réorienter une esquisse
Sketcher Réorientation |
Emplacement du menu |
---|
Part design → Reorientation sketch |
Ateliers |
Sketcher, PartDesign |
Raccourci par défaut |
Aucun |
Introduit dans la version |
- |
Voir aussi |
Map sketch, New Sketch |
Description
Allows you to detach a sketch from a face and attach it to one of the main planes (with an offset).
- Select the sketch to be re-oriented in the tree-view
- Choose Sketch → Reorient sketch from the top menu
- A menu will pop up and ask you if you want to detach the sketch from its face
- Selecting Yes will give you the same menu as in Sketch → New Sketch
- You can attach the sketch to one of the main planes
- You also have the possibility to add a positive or negative offset
Orientation du plan
- Inverser la direction : inverse la vue du plan.
- Offset : Donner un déplacement par rapport aux coordonnées d'origine X=0 Y=0 et Z=0.
- When selecting Cancel in the second menu the sketch is simply detached from its face.
- As long as no sketch is selected, the command is greyed out.