Sketcher Reorient

From FreeCAD Documentation
Revision as of 08:59, 26 September 2020 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Sketcher Reorient

Ubicación en el Menú
Part design → Reorient sketch
Entornos de trabajo
Sketcher, PartDesign
Atajo de teclado por defecto
Ninguno
Introducido en versión
-
Ver también
Map sketch, New Sketch

Description

Allows you to detach a sketch from a face and attach it to one of the main planes (with an offset).

Usage

  1. Select the sketch to be re-oriented in the tree-view
  2. Choose Sketch → Reorient sketch from the top menu.
  3. A menu will pop up and ask you if you want to detach the sketch from its face
  4. Selecting Yes will give you the same menu as in Sketch → New Sketch.
  5. You can attach the sketch to one of the main planes
  6. You also have the possibility to add a positive or negative offset

Notes

  • When selecting Cancel in the second menu the sketch is simply detached from its face.
  • As long as no sketch is selected, the command is greyed out.