Skicář Změna orientace

From FreeCAD Documentation
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
This page is a translated version of the page Sketcher ReorientSketch and the translation is 12% complete.
Outdated translations are marked like this.

Skicář Změna orientace

Umístění Menu
Návrh dílu → Změna orientace náčrtu
Pracovní stoly
Skicář, Návrh dílu
Výchozí zástupce
Nikdo
Představen ve verzi
-
Viz také
Vyznač náčrt, Nový náčrt

Popis

The Sketcher ReorientSketch tool places a sketch on one of the main planes with an optional offset. It can also be used to detach a sketch.

Usage

  1. Select a sketch.
  2. There are several ways to invoke the tool:
  3. If the sketch is attached:
    1. The Sketch has support dialog opens.
    2. Press the Yes button to detach the sketch.
  4. The Choose orientation dialog opens.
  5. Optionally press the Cancel button to only detach the sketch and finish the tool.
  6. Specify the plane for the orientation. The plane is relative to the local coordinate system the sketch is in:
    • If the Reverse direction checkbox is not checked:
      • Top: XY-Plane
      • Front: XZ-Plane
      • Right: YZ-Plane
    • If the Reverse direction checkbox is checked:
      • Bottom: XY-Plane
      • Rear: XZ-Plane
      • Left: YZ-Plane
  7. Optionally change the Offset. The offset is measured along the Z, Y or X axis of the local coordinate system.
  8. Press the OK button.