Sketcher: Riposiziona lo schizzo
|
Riposiziona Schizzo |
| Posizione nel menu |
|---|
| Part design → Riposiziona sketch |
| Ambiente |
| Sketcher, PartDesign |
| Avvio veloce |
| Nessuno |
| Introdotto nella versione |
| - |
| Vedere anche |
| Mappa schizzo, Nuovo schizzo |
Description
Allows you to detach a sketch from a face and attach it to one of the main planes (with an offset).
Use
- Select the sketch to be re-oriented in the tree-view
- Choose Sketch → Reorient sketch from the top menu
- A menu will pop up and ask you if you want to detach the sketch from its face
- Selecting "Yes" will give you the same menu as in Sketch → New Sketch
- You can attach the sketch to one of the main planes
- You also have the possibility to add a positive or negative offset
Note
When selecting cancel in the second menu the sketch is simply detached from its face.