Sketcher ReorientSketch/fr: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 8: Line 8:
#Choose {{KEY| Sketch}} → {{KEY| Reorient sketch}} from the top menu
#Choose {{KEY| Sketch}} → {{KEY| Reorient sketch}} from the top menu
#A menu will pop up and ask you if you want to detach the sketch from its face
#A menu will pop up and ask you if you want to detach the sketch from its face
#Selecting "Yes" will give you the same menu as in {{KEY| Sketch}} → {{KEY| New Sketch}}
#Selecting {{KEY| Yes}} will give you the same menu as in {{KEY| Sketch}} → {{KEY| New Sketch}}
#You can attach the sketch to one of the main planes
#You can attach the sketch to one of the main planes
#You also have the possibility to add a positive or negative offset
#You also have the possibility to add a positive or negative offset


=== Note ===
=== Note ===
When selecting cancel in the second menu the sketch is simply detached from its face.
* When selecting {{KEY| Cancel}} in the second menu the sketch is simply detached from its face.
* If there are no one sketch selected the command is greyed out.


{{clear}}
{{clear}}

Revision as of 20:22, 4 April 2016

Sketcher Reorientation

Emplacement du menu
Part design → Reorientation sketch
Ateliers
Sketcher, PartDesign
Raccourci par défaut
Aucun
Introduit dans la version
-
Voir aussi
Map sketch, New Sketch

Description

Allows you to detach a sketch from a face and attach it to one of the main planes (with an offset).

Use

  1. Select the sketch to be re-oriented in the tree-view
  2. Choose Sketch Reorient sketch from the top menu
  3. A menu will pop up and ask you if you want to detach the sketch from its face
  4. Selecting Yes will give you the same menu as in Sketch New Sketch
  5. You can attach the sketch to one of the main planes
  6. You also have the possibility to add a positive or negative offset

Note

  • When selecting Cancel in the second menu the sketch is simply detached from its face.
  • If there are no one sketch selected the command is greyed out.