Sketcher Создать эскиз

From FreeCAD Documentation
Revision as of 14:00, 30 March 2019 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Sketcher NewSketch

Системное название
Sketcher NewSketch
Расположение в меню
Sketch → Создать эскиз
Верстаки
Sketcher, PartDesign
Быстрые клавиши
Нет
Представлено в версии
-
См. также
/ruSketcher MapSketch, Sketcher Reorient

Description

This will create a new sketch.

Note that the PartDesign workbench has its own new sketch command, when using PartDesign it is preferable to use its own dedicated tool.

How to use

Clicking on the icon without a face (pre-)selected will pop up a dialog asking if the sketch should be drawn on the

  • XY-Plane
  • XZ-Plane
  • YZ-Plane

You can change an offset to any of the three planes and the side of the offset.

Clicking on the icon with a (pre-selected) face will cause the sketch to be mapped to the selected face.

Note

The sketch can be re-mapped to another already existing face using the Map Sketch - Command

The sketch can be moved in the 3D-Space using Placement.