Sketcher Создать эскиз
|
|
| Системное название |
|---|
| Sketcher NewSketch |
| Расположение в меню |
| Sketch → Создать эскиз |
| Верстаки |
| Sketcher, PartDesign |
| Быстрые клавиши |
| Нет |
| Представлено в версии |
| - |
| См. также |
| /ruSketcher MapSketch, Sketcher Reorient |
Description
This will create a new sketch.
Usage
Clicking on the icon without a face (pre-)selected will pop up a dialog asking if the sketch should be drawn on the
- XY-Plane
- XZ-Plane
- YZ-Plane
You can change an offset to any of the three planes and the side of the offset.
Clicking on the icon with a (pre-selected) face will cause the sketch to be mapped to the selected face.
Note
The sketch can be re-mapped to another already existing face using the Map Sketch - Command
The sketch can be moved in the 3D-Space using Placement.