Sketcher NewSketch/ro: Difference between revisions
(Created page with "====Descriere==== This will create a new sketch.") |
(Created page with "====Utilizare==== Clicking on the icon without a face (pre-)selected will pop up a dialog asking if the sketch should be drawn on the * XY-Plane * XZ-Plane * YZ-Plane You can...") |
||
Line 5: | Line 5: | ||
This will create a new sketch. |
This will create a new sketch. |
||
==== |
====Utilizare==== |
||
Clicking on the icon without a face (pre-)selected will pop up a dialog asking if the sketch should be drawn on the |
Clicking on the icon without a face (pre-)selected will pop up a dialog asking if the sketch should be drawn on the |
||
* XY-Plane |
* XY-Plane |
Revision as of 15:06, 17 October 2018
Sketcher NewSketch |
Menu location |
---|
Sketch → Create sketch |
Workbenches |
Sketcher, PartDesign |
Default shortcut |
None |
Introduced in version |
- |
See also |
Sketcher MapSketch, Sketcher Reorient |
Descriere
This will create a new sketch.
Utilizare
Clicking on the icon without a face (pre-)selected will pop up a dialog asking if the sketch should be drawn on the
- XY-Plane
- XZ-Plane
- YZ-Plane
You can change an offset to any of the three planes and the side of the offset.
Clicking on the icon with a (pre-selected) face will cause the sketch to be mapped to the selected face.
Note
The sketch can be re-mapped to another already existing face using the Map Sketch - Command
The sketch can be moved in the 3D-Space using Placement.