Sketcher NewSketch/it: Difference between revisions
Renatorivo (talk | contribs) No edit summary |
Renatorivo (talk | contribs) (Created page with "==== Schizzo su un piano già definito ==== # Selezionare un piano, ad esempio una faccia in un oggetto. # Avviare lo strumento") |
||
Line 11: | Line 11: | ||
You can change an offset to any of the three planes and the side of the offset. |
You can change an offset to any of the three planes and the side of the offset. |
||
==== Schizzo su un piano già definito ==== |
|||
Clicking on the icon with a (pre-selected) face will cause the sketch to be mapped to the selected face. |
|||
# Selezionare un piano, ad esempio una faccia in un oggetto. |
|||
# Avviare lo strumento |
|||
==== Note ==== |
==== Note ==== |
Revision as of 21:05, 26 November 2014
Crea Schizzo |
Posizione nel menu |
---|
Part design → Crea uno sketch |
Ambiente |
Sketcher, PartDesign |
Avvio veloce |
Nessuno |
Introdotto nella versione |
- |
Vedere anche |
Mappa schizzo, Riposiziona schizzo |
Description
This will create a new sketch.
Usage
Clicking on the icon without a face (pre-)selected will pop up a dialog asking if the sketch should be drawn on the
- XY-Plane
- XZ-Plane
- YZ-Plane
You can change an offset to any of the three planes and the side of the offset.
Schizzo su un piano già definito
- Selezionare un piano, ad esempio una faccia in un oggetto.
- Avviare lo strumento
Note
Con uno schizzo chiuso si produce una forma piena, un solido. Con uno schizzo aperto si produce una forma vuota, un guscio.
Lo schizzo può essere rimappato su un'altra faccia esistente.
Lo schizzo può essere spostato nello spazio 3D utilizzando Posizionamento.